Integrated Measurement Technique To Measure Curing Process-dependent Mechanical And Thermal Properties Of Polymeric Materials Using Fiber Bragg Grating Sensors

An innovative technique based on a fiber Bragg grating (FBG) sensor is proposed to measure the critical mechanical and thermal properties of polymeric materials. The properties include (1) chemical shrinkage evolution during curing, (2) modulus evolution during curing, (3) glass transition temperature (4) coefficient of thermal expansion (CTE), and (5) visco-elastic properties. Optimum specimen configurations are proposed from the theoretical analysis. Then an efficient numerical procedure is established to determine the material properties from the measured Bragg wavelength (BW) shift. The technique is implemented with various polymeric materials. The measured quantities are verified through a self-consistency test as well as the existing testing methods such as a warpage measurement of a bi-material strip, and a TMA measurement. The evolution properties obtained at a curing temperature are extended further by combining them with the conventional isothermal DSC experiments. Based on the existing theories, the evolution properties can be predicted at any temperatures. The proposed technique greatly enhances the capability to characterize the mechanical properties and behavior of polymeric materials. Since the specimen preparation is very straightforward, the proposed method can be routinely practiced and the measurement can be completely automated. It will provide a much-needed tool for rapid but accurate assessment of polymer properties, which, in turn, will enhance the accuracy of predictive modeling for design optimization of a microelectronics product at the conceptual stage of product development

Bio-inspired all-optical artificial neuromast for 2D flow sensing

We present the design, fabrication and testing of a novel all-optical 2D flow velocity sensor, inspired by a fish lateral line neuromast. This artificial neuromast consists of optical fibres inscribed with Bragg gratings supporting a fluid force recipient sphere. Its dynamic response is modelled based on the Stokes solution for unsteady flow around a sphere and found to agree with experimental results. Tuneable mechanical resonance is predicted, allowing a deconvolution scheme to accurately retrieve fluid flow speed and direction from sensor readings. The optical artificial neuromast achieves a low frequency threshold flow sensing of 5 mm s(-1) and 5 mu m s(-1) at resonance, with a typical linear dynamic range of 38 dB at 100 Hz sampling. Furthermore, the optical artificial neuromast is shown to determine flow direction within a few degrees

Wellbore completion monitoring using fiber optic distributed strain sensing

Bohrlochintegrität ist unerlässlich für die erfolgreiche und nachhaltige Produktion und Injektion von Fluiden aus Reservoirgesteinen, wie beispielsweise bei der Nutzung von Kohlenwasserstoffen, Geothermie oder Standorten für geologische Speicherung. Um die Integrität einer Bohrung über seine Lebenszeit zu gewährleisten, ist vor allem eine erfolgreiche primäre Komplettierung nötig. Besonders die Zementation der Rohre stellt dabei ein großes Risiko dar, weil durch die natürlichen Gegebenheiten im Bohrloch viele Faktoren Einfluss auf die Zusammensetzung und Verteilung der Zementsuspension haben. Diese Studie untersucht das Monitoring-potenzial von faseroptischer ortsverteilter Dehnungsmessung DSS (distributed strain sensing). Ergänzend zu faseroptischer ortsverteilten Temperaturmessung DTS (distributed temperature sensing), welche seit mehr als zwei Jahrzehnten in der Industrie Anwendung findet, kann jeder Ort einer Glasfaser zusätzlich Informationen über den mechanischen Spannungszustand geben. Experimentelle und analytische Arbeiten wurden durchgeführt, um die Auswirkung von Laständerungen auf einer Faser zu quantifizieren. Desweiteren wurde der Einfluss komplexer mehrschichtiger Bohrlochkabel auf Dehnungsmessergebnisse untersucht. Ein faseroptisches Messkabel wurde im Zuge dieser Arbeit im Ringraum entlang der Produktionsrohrtour einer Bohrung installiert. Die gemessenen Geländedaten zeigen Ergebnisse aus zwei Arbeitsschritten der Fertigstellung der Bohrung - der Filterverkiesung und der Zementation. Aufgrund der Dichtedifferenz von Kies und Bohrspülung wurde am Kabel ein Dehnungseffekt gemessen. Die Teufe, in welcher der Dehnungseffekt auftritt, korreliert mit Wireline Gamma-Gamma-Dichtedaten, welche im gleichen Zeitfenster gemessen wurden. Die anschliessende Kompaktion des Kieskopfes wurde durch das Glasfaserkabel in Form einer zunehmenden mechanischen Belastung erfasst. Während der anschliessenden Zementation der Rohrtour wurde ein Dehnungseffekt in der Mischzone von Flüssigkeiten mit unterschiedlichen rheologischen Eigenschaften gemessen. Anhand eines Experiments konnte bestätigt werden, dass fluidrheologische Parameter (wie die Fluidviskosität) mit einem faseroptischen Messkabel quantifiziert werden können. Hierfür werden Fluidscherspannungen gemessen, welche durch das Fliessen von Fluiden an der Kabeloberfläche hervorgerufen werden (amtliches Zeichen zur Patentanmeldung: EP 19171265.2). DSS-Messungen erweiten das Verständnis von Fluidverdrängungsvorgängen in Bohrlöchern und ermöglichen eine Beurteilung von Komplettierungsvorgängen in Echtzeit.Borehole integrity is fundamental for the successful and sustainable utilization of hydrocarbons, geothermal energy and sites for geological storage. The success of the primary well completion is necessary to ensure the integrity of a well over its lifetime. In particular, the casing cementation represents a great risk because many factors have an influence on the composition and distribution of the cement suspension due to the natural conditions in the borehole. This study investigates the monitoring potential of fiber-optic distributed strain sensing (DSS) using a measurement cable which is installed in the annulus of a well. Similar to distributed temperature sensing (DTS), which is used for temperature monitoring in industry applications for more than two decades, fibers additionally convey information about their mechanical stress state. Laboratory as well as analytical work was performed to quantify the effect of load changes on a fiber. In addition, the influence of complex multilayered downhole cable on the strain response is examined. The presented field data shows results from two stages of the well completion - the gravel packing and the cementation. Due to the difference in density of gravel and drilling fluid, a deformation is measured on the cable. The depth at which the stretching effect occurs correlates with wire-line gamma-gamma density data measured in the same time window. The subsequent compaction of the gravel head, which was not revealed by the logging measurement, was detected by the fiber optic cable in the form of an increasing mechanical load on the cable. During cement pumping, fluid shear stresses create a measurable load on the cable, especially in the mixing zone of liquids with dfferent rheological properties. Based on this observation, an experiment was designed and conducted which aims at measuring fluid rheological parameters such as fluid viscosity. For this purpose, the fluid shear stresses acting on the fiber optic sensing cable in the flow path are measured (patent application number: EP 19171265.2). DSS measurements extend the understanding of fluid displacements in wellbores and allow an assessment of well completion process in real time

Design, processing and characterisation of new optical fibre sensors for harsh environment.

L'abstract è presente nell'allegato / the abstract is in the attachmen

Nondestructive evaluation and underwater repair of composite structures

Thesis (S.M. and Nav. E.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.Includes bibliographical references (leaves 98-106).Composite materials are gaining popularity in U.S. Naval applications because of their unparalleled strength, stiffness, and manufacturing simplicity. A better understanding of the structural integrity of these materials has the potential to reduce overdesign, decrease manufacturing cost, and simplify repairs. Though underwater nondestructive evaluation of composites has not been well documented, this thesis illustrates the available technologies for underwater evaluation and repair of laminated composite structures, similar to those currently used in marine applications. Dependent on accuracy and reliability of underwater evaluation, the decision to pursue temporary or permanent repairs may be made based on available information regarding the structural integrity of the effected repairs. Discussion of the environmental effects on composite laminates and their repairs is included to provide insight into the detrimental effects of contaminates such as saltwater and petroleum products. The effect of the environment has a profound impact on the quality of composite repairs using currently available repair materials. Underwater repairs, whether permanent or temporary, are suggested for future U.S. Navy components such as the DDG-1000 composite twisted rudder. Furthermore, a suggestion is made to eliminate the use of cofferdams on U.S. Navy shaft covering repairs in order to reduce both cost and the risk of injury associated with a cofferdam.by William L. Hagan III.S.M.and Nav.E

Recent Advances and Future Trends in Pavement Engineering

This Special Issue “Recent Advances and Future Trends in Pavement Engineering” was proposed and organized to present recent developments in the field of innovative pavement materials and engineering. The 12 articles and state-of-the-art reviews highlighted in this editorial are related to different aspects of pavement engineering, from recycled asphalt pavements to alkali-activated materials, from hot mix asphalt concrete to porous asphalt concrete, from interface bonding to modal analysis, and from destructive testing to non-destructive pavement monitoring by using fiber optics sensors. This Special Issue partly provides an overview of current innovative pavement engineering ideas that have the potential to be implemented in industry in the future, covering some recent developments

MARE-WINT: New Materials and Reliability in Offshore Wind Turbine Technology

renewable; green; energy; environment; law; polic

Marshall Space Flight Center Faculty Fellowship Program

The Faculty Fellowship program was revived in the summer of 2015 at NASA Marshall Space Flight Center, following a period of diminished faculty research activity here since 2006 when budget cuts in the Headquarters' Education Office required realignment. Several senior Marshall managers recognized the need to involve the Nation's academic research talent in NASA's missions and projects to the benefit of both entities. These managers invested their funds required to establish the renewed Faculty Fellowship program in 2015, a 10-week residential research involvement of 16 faculty in the laboratories and offices at Marshall. These faculty engineers and scientists worked with NASA collaborators on NASA projects, bringing new perspectives and solutions to bear. This Technical Memorandum is a compilation of the research reports of the 2015 Marshall Faculty Fellowship program, along with the Program Announcement (appendix A) and the Program Description (appendix B). The research touched on seven areas-propulsion, materials, instrumentation, fluid dynamics, human factors, control systems, and astrophysics. The propulsion studies included green propellants, gas bubble dynamics, and simulations of fluid and thermal transients. The materials investigations involved sandwich structures in composites, plug and friction stir welding, and additive manufacturing, including both strength characterization and thermosets curing in space. The instrumentation projects involved spectral interfero- metry, emissivity, and strain sensing in structures. The fluid dynamics project studied the water hammer effect. The human factors project investigated the requirements for close proximity operations in confined spaces. Another team proposed a controls system for small launch vehicles, while in astrophysics, one faculty researcher estimated the practicality of weather modification by blocking the Sun's insolation, and another found evidence in satellite data of the detection of a warm-hot intergalactic medium filament. Our goal is to continue the Faculty Fellowship effort with Center funds in succeeding summers