Modeling and Verifying Uncertainty-Aware Timing Behaviors using Parametric Logical Time Constraint

International audienceThe Clock Constraint Specification Language (CCSL) is a logical time based modeling language to formalize timing behaviors of real-time and embedded systems. However, it cannot capture timing behaviors that contain uncertainties, e.g., uncertainty in execution time and period. This limits the application of the language to real-world systems, as uncertainty often exists in practice due to both internal and external factors. To capture uncertainties in timing behaviors, in this paper we extend CCSL by introducing parameters into constraints. We then propose an approach to transform parametric CCSL constraints into SMT formulas for efficient verification. We apply our approach to an industrial case which is proposed as the FMTV (Formal Methods for Timing Verification) Challenge in 2015, which shows that timing behaviors with uncertainties can be effectively modeled and verified using the parametric CCSL

Zone-based formal specification and timing analysis of real-time self-adaptive systems

Self-adaptive software systems are able to autonomously adapt their behavior at run-time to react to internal dynamics and to uncertain and changing environment conditions. Formal specification and verification of self-adaptive systems are tasks generally very difficult to carry out, especially when involving time constraints. In this case, in fact, the system correctness depends also on the time associated with events. This article introduces the Zone-based Time Basic Petri nets specification formalism. The formalism adopts timed adaptation models to specify self-adaptive behavior with temporal constraints, and relies on a zone-based modeling approach to support separation of concerns. Zones identified during the modeling phase can be then used as modules either in isolation, to verify intra-zone properties, or all together, to verify inter-zone properties over the entire system. In addition, the framework allows the verification of (timed) robustness properties to guarantee self-healing capabilities when higher levels of reliability and availability are required to the system, especially when dealing with time-critical systems. This article presents also the ZAFETY tool, a Java software implementation of the proposed framework, and the validation and experimental results obtained in modeling and verifying two time-critical self-adaptive systems: the Gas Burner system and the Unmanned Aerial Vehicle system

Computer Aided Verification

This open access two-volume set LNCS 11561 and 11562 constitutes the refereed proceedings of the 31st International Conference on Computer Aided Verification, CAV 2019, held in New York City, USA, in July 2019. The 52 full papers presented together with 13 tool papers and 2 case studies, were carefully reviewed and selected from 258 submissions. The papers were organized in the following topical sections: Part I: automata and timed systems; security and hyperproperties; synthesis; model checking; cyber-physical systems and machine learning; probabilistic systems, runtime techniques; dynamical, hybrid, and reactive systems; Part II: logics, decision procedures; and solvers; numerical programs; verification; distributed systems and networks; verification and invariants; and concurrency

Surrogate based Optimization and Verification of Analog and Mixed Signal Circuits

Nonlinear Analog and Mixed Signal (AMS) circuits are very complex and expensive to design and verify. Deeper technology scaling has made these designs susceptible to noise and process variations which presents a growing concern due to the degradation in the circuit performances and risks of design failures. In fact, due to process parameters, AMS circuits like phase locked loops may present chaotic behavior that can be confused with noisy behavior. To design and verify circuits, current industrial designs rely heavily on simulation based verification and knowledge based optimization techniques. However, such techniques lack mathematical rigor necessary to catch up with the growing design constraints besides being computationally intractable. Given all aforementioned barriers, new techniques are needed to ensure that circuits are robust and optimized despite process variations and possible chaotic behavior. In this thesis, we develop a methodology for optimization and verification of AMS circuits advancing three frontiers in the variability-aware design flow. The first frontier is a robust circuit sizing methodology wherein a multi-level circuit optimization approach is proposed. The optimization is conducted in two phases. First, a global sizing phase powered by a regional sensitivity analysis to quickly scout the feasible design space that reduces the optimization search. Second, nominal sizing step based on space mapping of two AMS circuits models at different levels of abstraction is developed for the sake of breaking the re-design loop without performance penalties. The second frontier concerns a dynamics verification scheme of the circuit behavior (i.e., study the chaotic vs. stochastic circuit behavior). It is based on a surrogate generation approach and a statistical proof by contradiction technique using Gaussian Kernel measure in the state space domain. The last frontier focus on quantitative verification approaches to predict parametric yield for both a single and multiple circuit performance constraints. The single performance approach is based on a combination of geometrical intertwined reachability analysis and a non-parametric statistical verification scheme. On the other hand, the multiple performances approach involves process parameter reduction, state space based pattern matching, and multiple hypothesis testing procedures. The performance of the proposed methodology is demonstrated on several benchmark analog and mixed signal circuits. The optimization approach greatly improves computational efficiency while locating a comparable/better design point than other approaches. Moreover, great improvements were achieved using our verification methods with many orders of speedup compared to existing techniques

Computer Aided Verification

This open access two-volume set LNCS 11561 and 11562 constitutes the refereed proceedings of the 31st International Conference on Computer Aided Verification, CAV 2019, held in New York City, USA, in July 2019. The 52 full papers presented together with 13 tool papers and 2 case studies, were carefully reviewed and selected from 258 submissions. The papers were organized in the following topical sections: Part I: automata and timed systems; security and hyperproperties; synthesis; model checking; cyber-physical systems and machine learning; probabilistic systems, runtime techniques; dynamical, hybrid, and reactive systems; Part II: logics, decision procedures; and solvers; numerical programs; verification; distributed systems and networks; verification and invariants; and concurrency

A Model-based Approach for Designing Cyber-Physical Production Systems

The most recent development trend related to manufacturing is called "Industry 4.0". It proposes to transition from "blind" mechatronics systems to Cyber-Physical Production Systems (CPPSs). Such systems are capable of communicating with each other, acquiring and transmitting real-time production data. Their management and control require a structured software architecture, which is tipically referred to as the "Automation Pyramid". The design of both the software architecture and the components (i.e., the CPPSs) is a complex task, where the complexity is induced by the heterogeneity of the required functionalities. In such a context, the target of this thesis is to propose a model-based framework for the analysis and the design of production lines, compliant with the Industry 4.0 paradigm. In particular, this framework exploits the Systems Modeling Language (SysML) as a unified representation for the different viewpoints of a manufacturing system. At the components level, the structural and behavioral diagrams provided by SysML are used to produce a set of logical propositions about the system and components under design. Such an approach is specifically tailored towards constructing Assume-Guarantee contracts. By exploiting reactive synthesis techniques, contracts are used to prototype portions of components' behaviors and to verify whether implementations are consistent with the requirements. At the software level, the framework proposes a particular architecture based on the concept of "service". Such an architecture facilitates the reconfiguration of components and integrates an advanced scheduling technique, taking advantage of the production recipe SysML model. The proposed framework has been built coupled with the construction of the ICE Laboratory, a research facility consisting of a full-fledged production line. Such an approach has been adopted to construct models of the laboratory, to virtual prototype parts of the system and to manage the physical system through the proposed software architecture

Computer Aided Verification

This open access two-volume set LNCS 13371 and 13372 constitutes the refereed proceedings of the 34rd International Conference on Computer Aided Verification, CAV 2022, which was held in Haifa, Israel, in August 2022. The 40 full papers presented together with 9 tool papers and 2 case studies were carefully reviewed and selected from 209 submissions. The papers were organized in the following topical sections: Part I: Invited papers; formal methods for probabilistic programs; formal methods for neural networks; software Verification and model checking; hyperproperties and security; formal methods for hardware, cyber-physical, and hybrid systems. Part II: Probabilistic techniques; automata and logic; deductive verification and decision procedures; machine learning; synthesis and concurrency. This is an open access book

Model-Based Engineering of Collaborative Embedded Systems

This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years

Modeling Time in Computing: A Taxonomy and a Comparative Survey

The increasing relevance of areas such as real-time and embedded systems, pervasive computing, hybrid systems control, and biological and social systems modeling is bringing a growing attention to the temporal aspects of computing, not only in the computer science domain, but also in more traditional fields of engineering. This article surveys various approaches to the formal modeling and analysis of the temporal features of computer-based systems, with a level of detail that is suitable also for non-specialists. In doing so, it provides a unifying framework, rather than just a comprehensive list of formalisms. The paper first lays out some key dimensions along which the various formalisms can be evaluated and compared. Then, a significant sample of formalisms for time modeling in computing are presented and discussed according to these dimensions. The adopted perspective is, to some extent, historical, going from "traditional" models and formalisms to more modern ones.Comment: More typos fixe