Effect of a mixture of caffeine and nicotinamide on the solubility of vitamin (B2) in aqueous solution

The effect of caffeine (CAF) and nicotinamide (NMD) on the solubility of a vitamin B2 derivative (FMN) has been evaluated for mixtures containing either a single hydrotrope (CAF or NMD) or the two hydrotropes simultaneously. A model for analysis of ternary systems, which takes into account all possible complexes between the molecules, has been developed and tested with experimental NMR data on the three-component mixture FMN–CAF–NMD. The results indicate that special attention should be given to the concentration of a hydrotropic agent used to enhance the solubility of a particular drug. A decrease in the efficacy of solubility of the vitamin on addition of large amounts of hydrotropic agent is expected in the two-component systems due to the increased proportion of self-association of the hydrotrope. It is found that a mixture of two hydrotropic agents leads to an increase in the solubility of the vitamin in three-component compared to the two-component system. Rather than using just one hydrotropic agent, it is proposed that a strategy for optimising the solubility of aromatic drugs is to use a mixture of hydrotropic agents

The role of phospholipid as a solubility- and permeability-enhancing excipient for the improved delivery of the bioactive phytoconstituents of Bacopa monnieri

In an attempt to improve the solubility and permeability of Standardized Bacopa Extract (SBE), a complexation approach based on phospholipid was employed. A solvent evaporation method was used to prepare the SBE-phospholipid complex (Bacopa Naturosome, BN). The formulation and process variables were optimized using a central-composite design. The formation of BN was confirmed by photomicroscopy, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Powder X-ray Diffraction (PXRD). The saturation solubility, the in-vitro dissolution, and the ex-vivo permeability studies were used for the functional evaluation of the prepared complex. BN exhibited a significantly higher aqueous solubility compared to the pure SBE (20-fold), or the physical mixture of SBE and the phospholipid (13-fold). Similarly, the in-vitro dissolution revealed a significantly higher efficiency of the prepared complex (BN) in releasing the SBE (\u3e 97%) in comparison to the pure SCE (~ 42%), or the physical mixture (~ 47%). The ex-vivo permeation studies showed that the prepared BN significantly improved the permeation of SBE (\u3e 90%), compared to the pure SBE (~ 21%), or the physical mixture (~ 24%). Drug-phospholipid complexation may thus be a promising strategy for solubility enhancement of bioactive phytoconstituents

The solvation and dissociation of 4-benzylaniline hydrochloride in chlorobenzene

A reaction scheme is proposed to account for the liberation of 4-benzylaniline from 4-benzylaniline hydrochloride, using chlorobenzene as a solvent at a temperature of 373 K. Two operational regimes are explored: “closed” reaction conditions correspond to the retention of evolved hydrogen chloride gas within the reaction medium, whereas an “open” system permits gaseous hydrogen chloride to be released from the reaction medium. The solution phase chemistry is analyzed by 1H NMR spectroscopy. Complete liberation of solvated 4-benzylaniline from solid 4-benzylaniline hydrochloride is possible under “open” conditions, with the entropically favored conversion of solvated hydrogen chloride to the gaseous phase thought to be the thermodynamic driver that effectively controls a series of interconnecting equilibria. A kinetic model is proposed to account for the observations of the open system

Preferential sorption versus preferential permeability in pervaporation

Transport of liquids by pervaporation takes place by a solution—diffusion mechanism. In order to investigate the “solution part” of this transport model, preferential sorption has been compared with preferential permeability. Sorption equilibria and pervaporation experiments for the systems water—ethanol—cellulose acetate, water—ethanol—polyacrylonitrile and water—ethanol—polysulfone have been investigated. Theoretical values of preferential sorption have been derived from Flory—Huggins thermodynamics, extended with concentration dependent interaction parameters. These calculated sorption values show a reasonable agreement with experimental values. The large difference in molar volumes between water and ethanol determines the preferential sorption of water in these systems to a great extent, and this effect increases with decreasing swelling value. Comparison of preferential sorption experiments with pervaporation experiments indicates that, apart from the effect of differences in diffusivity for the permeating components, preferential sorption contributes to a major extent to selective transport

The solubility and oxidation state of nickel in silicate melt at low oxygen fugacities: Results using a mechanically assisted equilibration technique

The solubility of Ni in a silicate melt has been measured using a new, mechanically assisted equilibration technique over a wide range of controlled ƒO2 values. The melt composition corresponds to the 1 atm eutectic in the system CaAl2Si2O8-CaMgSi2O6 + 10 wt% CaO. The experiments were performed at 1300°C and over an ƒO2 range of 10−8.5 to 10−13.75, and over a temperature range of 1270 to 1390°C at a constant gas mixing ratio ( ). The experiment consists of a sample of melt contained within a crucible of Ni metal and held in a 1 atm gas mixing furnace. A Ni spindle is entered into the sample from above and continuously rotated at a constant angular velocity using a viscometer head. The stirring of the sample serves to accelerate the approach to equilibrium between the liquid sample and the metal crucible (and spindle). This arrangement allows relatively rapid equilibration of Ni content following changes to higher or lower ƒO2 values. Samples of the melt may be taken at any time for analysis and thus the equilibrium solubility of Ni in the silicate melt may be determined from unambiguous experimental reversals. The Ni contents of samples, analysed both by INAA and by ICP-AES, range from 25 to 5300 ppm. The data presented in this paper indicate that the oxidation state of Ni in the investigated melt is Ni2+ over the entire range of ƒO2 investigated. This conclusion contrasts with recent reports in the literature of an inflection in the ƒO2 dependence of Ni solubility, which has been interpreted as solution of neutral Ni at low ƒO2 (Morse et al., 1991; Colson, 1992; Ehlers et al., 1992). We also present data for the temperature dependence of Ni solubility in the investigated melt. The solubility decreases with increasing temperature at constant ƒO2. The present results are in good agreement with the metal-loop-equilibration experiments reported by Holzheid et al. (1994)

Glucosamine HCl-based solid dispersions to enhance the biopharmaceutical properties of acyclovir

The objective of the work presented here was to assess the feasibility of using glucosamine HCl as a solid-dispersion (SD) carrier to enhance the biopharmaceutical properties of a BCS class III/IV drug, acyclovir (ACV). The solid-dispersions of acyclovir and glucosamine HCl were prepared by an ethanol-based solvent evaporation method. The prepared formulations characterized by photomicroscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transforms infrared spectrophotometry (FTIR), powder x-ray diffractometry (PXRD) and drug content analysis. The functional characterization of ACV-SD was performed by aqueous solubility evaluation, dissolution studies, fasted versus fed state dissolution comparison, ex vivo permeability, and stability studies. Photomicroscopy and SEM analysis showed different surface morphologies for pure ACV, glucosamine HCl and ACV-SD. The physical-chemical characterization studies supported the formation of ACV-SD. A 12-fold enhancement in the aqueous solubility of ACV was observed in the prepared solid dispersions, compared to pure ACV. Results from in vitro dissolution demonstrated a significant increase in the rate and extent of ACV dissolution from the prepared ACV-SD formulations, compared to pure ACV. The rate and extent of ACV permeability across everted rat intestinal membrane were also found to be significantly increased in the ACV-SD formulations. Under fed conditions, the rate and extent of the in vitro dissolution of ACV from the formulation was appreciably greater compared to fasted conditions. Overall, the results from the study suggest the feasibility of utilizing glucosamine HCl as a solid dispersion carrier/excipient for enhancement of biopharmaceutical properties of acyclovir, and similar drugs with low solubility/permeability characteristics

A Multiscale Approach for the Characterization and Crystallization of Eflucimibe Polymorphs: from Molecules to Particles

We present in this paper a generic multiscale methodology for the characterization and crystallization of eflucimibe polymorphs. The various characterization techniques used have shown that eflucimibe polymorphism is due to a conformational change of the molecule in the crystal lattice. In addition, the two polymorphs are monotropically related in the temperature range tested and have similar structures and properties (ie. interfacial tension and solubility). Consequently, it was found that for a wide range of operating conditions, the polymorphs may crystallize concomitantly. Induction time measurements and metstable zone width determination allow to infer the origin of the concomitant appearance of the polymorphs. A predominance diagram has been established which allows to perfectly control the crystallization of the desired polymorph. However, even if the stable form can be produced in a reliable way, the crystal suspension went toward a very structured gel-like network which limits the extrapolation process. Based on microscopic observation of the crystallization events performed in a microfluidic crystallizer, we propose a range of operating conditions suitable for the production of the stable form with the desired handling properties

Methane and Nitrogen Abundances On Pluto and Eris

We present spectra of Eris from the MMT 6.5 meter telescope and Red Channel Spectrograph (5700-9800 angstroms; 5 angstroms per pix) on Mt. Hopkins, AZ, and of Pluto from the Steward Observatory 2.3 meter telescope and Boller and Chivens spectrograph (7100-9400 angstroms; 2 angstroms per pix) on Kitt Peak, AZ. In addition, we present laboratory transmission spectra of methane-nitrogen and methane-argon ice mixtures. By anchoring our analysis in methane and nitrogen solubilities in one another as expressed in the phase diagram of Prokhvatilov and Yantsevich (1983), and comparing methane bands in our Eris and Pluto spectra and methane bands in our laboratory spectra of methane and nitrogen ice mixtures, we find Eris' bulk methane and nitrogen abundances are about 10% and about 90%, and Pluto's bulk methane and nitrogen abundances are about 3% and about 97%. Such abundances for Pluto are consistent with values reported in the literature. It appears that the bulk volatile composition of Eris is similar to the bulk volatile composition of Pluto. Both objects appear to be dominated by nitrogen ice. Our analysis also suggests, unlike previous work reported in the literature, that the methane and nitrogen stoichiometry is constant with depth into the surface of Eris. Finally, we point out that our Eris spectrum is also consistent with a laboratory ice mixture consisting of 40% methane and 60% argon. Although we cannot rule out an argon rich surface, it seems more likely that nitrogen is the dominant species on Eris because the nitrogen ice 2.15 micron band is seen in spectra of Pluto and Triton.Comment: The manuscript has 44 pages, 15 figures, and four tables. It will appear in the Astrophysical Journa