Simulation of Micro-Electronic FlowFET Systems

A microelectronic fluidic system has been investigated by modeling and 3D simulation of fluid flow controlled by an applied gate voltage. The simulations have helped to characterize a novel FlowFET (a fluidic Field Effect Transistor) device under fault-free conditions. The FlowFET operates by applying a voltage field from a gate electrode in the insulated side wall of a microchannel to modulate the ␣-potential at the shear plane [1]. The change in ␣-potential can be used to control both the magnitude and direction of the electroosmotic flow in the microchannel

Physical modelling of amorphous thermoplastic polymer and numerical simulation of micro hot embossing process

Micro hot embossing process is considered as one of the most promising micro replication processes for manufacturing of polymeric components, especially for the high aspect ratio components and large surface structural components. A large number of hot embossing experimental results have been published, the material modelling and processes simulation to improve the quality of micro replication by hot embossing process are still lacking. This paper consists to 3D modelling of micro hot embossing process with amorphous thermoplastic polymers, including the mechanical characterisation of polymers properties, identification of the viscoelastic behaviour law of the polymers, numerical simulation and experimental investigation of micro hot embossing process. Static compression creep tests have been carried out to investigate the selected polymers’ viscoelastic properties. The Generalized Maxwell model has been proposed to describe the relaxation modulus of the polymers and good agreement has been observed. The numerical simulation of the hot embossing process in 3D has been achieved by taking into account the viscoelastic behaviour of the polymers. The microfluidic devices with the thickness of 2 mm have been elaborated by hot embossing process. The hot embossing process has been carried out using horizontal injection/compression moulding equipment, especially developed for this study. A complete compression mould tool, equipped with the heating system, the cooling system, the ejection system and the vacuum system, has been designed and elaborated in our research. Polymer-based microfluidic devices have been successfully replicated by the hot embossing process using the compression system developed. Proper agreement between the numerical simulation and the experimental elaboration has been observed. It shows strong possibility for the development of the 3D numerical model to optimize the micro hot embossing process in the future

A Comparative Numerical Study on GEM, MHSP and MSGC

In this work, we have tried to develop a detailed understanding of the physical processes occurring in those variants of Micro Pattern Gas Detectors (MPGDs) that share micro hole and micro strip geometry, like GEM, MHSP and MSGC etc. Some of the important and fundamental characteristics of these detectors such as gain, transparency, efficiency and their operational dependence on different device parameters have been estimated following detailed numerical simulation of the detector dynamics. We have used a relatively new simulation framework developed especially for the MPGDs that combines packages such as GARFIELD, neBEM, MAGBOLTZ and HEED. The results compare closely with the available experimental data. This suggests the efficacy of the framework to model the intricacies of these micro-structured detectors in addition to providing insight into their inherent complex dynamical processes

Statistical Inference in Micro Simulation Models: Incorporating external information

In practical applications of micro simulation models very little is usually known about the properties of the simulated values. This paper argues that we need to apply the same rigorous standards for inference in micro simulation work as in scientific work generally. If not, then micro simulation models will loose in credibility. The paper first discusses how the structure of the model will determine inference and then follow sections on estimation and validation. Differences between inference in static and dynamic models are noted and then the paper focuses on the estimation of behavioral parameters. There are three themes: calibration viewed as estimation subject to external constraints, piece meal vs. system-wide estimation, and simulation based estimation.Micro simulation; Alignment; Calibration; System-wide estimation; Simulation-based estimation

Multiscale simulation strategies and mesoscale modelling of gas and liquid flows

This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.This paper presents a review of multiscale simulation strategies for the modelling of micro- and nanoscale flows. These have been developed in the last two decades in an attempt to bridge the application gap between molecular and continuum simulation methods preventing the simulation of many micro- and nanofluidic devices. The paper is focused on hybrid molecular-continuum methods and reviews different coupling strategies, including geometrical decomposition in conjunction with state- and flux coupling, pointwise coupling, the heterogeneous multiscale method and the equation free approach. The different applications of these methods are briefly discussed

Simulation of the electrohydrodynamic instability process used in the fabrication of hierarchic and hollow micro/nanostructures

This article demonstrates that the electrohydrodynamic patterning process, a novel technique for the manufacturing of micro-and nano-scale structures, also allows the one-step realization of hierarchical structures and hollow structures. Through numerical simulation, it is shown that multilevel structures can be obtained if process time and applied electric voltage are optimized. As an example, the growth of structures with a width of around 187 nm and depth of 95 nm has been successfully simulated alongside structures with width of around 0.4 mu m and depth of 0.8 mu m. The width of the protrusive mask patterns is shown to determine whether hollow structures with single or multiple shapes can be formed using electric field assisted capillarity. The numerical simulation process effectively demonstrates that the realization of micro/nano-structures with hierarchic and multilevel shapes can be considered as an innovative manufacturing process for MEMS or micro/nanofluidic structures.</p

Experiences with a simplified microsimulation for the Dallas/Fort Worth area

We describe a simple framework for micro simulation of city traffic. A medium sized excerpt of Dallas was used to examine different levels of simulation fidelity of a cellular automaton method for the traffic flow simulation and a simple intersection model. We point out problems arising with the granular structure of the underlying rules of motion.Comment: accepted by Int.J.Mod.Phys.C, 20 pages, 14 figure