Transmission properties of acousto optic material

Laser beam can be modulated by acousto optic modulator using a suitable acousto optic material. UV-VIS Spectrophotometer was utilized to investigate the transmission spectrum of two non linear acousto optic materials that are lithium niobate and fused quartz. From the spectrum it shows that transmittance for fused quartz and lithium niobate were 90% and 68% respectively. The absorption coefficient ? is calculated and plotted versus photon energy. It was found that ? increases linearly with photon energy in the range of 3.50 eV to 4.0 eV for fused quartz and 3.15 eV to 4.0 eV for lithium niobate. The estimated optical energy band gap was 2.97 eV for lithium niobate and 3.69 for fused quartz. From the transmission properties obtained in this study, it can be summarized that fused quartz is a better choice to be an acousto optic material

Material properties of nanoclay PVC composites

Nanocomposites of poly(vinyl chloride) have been prepared using both hectorite- and bentonite-based organically-modified clays. The organic modification used is tallow-triethanol-ammonium ion. The morphology of the systems was investigated using X-ray diffraction and transmission electron microscopy and these systems show that true nanocomposites, both intercalated and exfoliated systems, are produced. The mechanical properties have been evaluated and the modulus increases upon nanocomposite formation without a significant decrease in tensile strength or elongation at break. Thermal analysis studies using thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis were conducted. Thermal stability of the PVC systems was assessed using a standard thermal process evaluating the evolution of hydrogen chloride and by color development through the yellowness index. Cone calorimetry was used to measure the fire properties and especially to evaluate smoke evolution. The addition of an appropriately-modified bentonite or hectorite nanoclay leads to both a reduction in the total smoke that is evolved, and an increase in the length of time over which smoke is evolved. Along with this, a reduction in the peak heat release rate is seen. It is likely that the presence of the clay in some way interferes with the cyclization of the conjugated system formed upon HCl loss

Tailored material properties using textile composites

Lightweighting is essential for the reduction of energy consumption in transportation. The most common approach is through the application of high specific strength and stiffness materials, such as composites and high performance aluminum alloys. One of the challenges associated with the use of advanced materials is the high cost. This paper explores the opportunities of using hybrid composites (glass and carbon, for example) with selective fiber placement to optimize the weight subject to price constraints for given components. Considering the example of a hat-section for hood reinforcement, different material configurations were modeled and developed. The required thickness of the hat section to meet the same bending stiffness as an all carbon composite beam was calculated. It was shown that selective placement of fiber around the highest moments results in a weight savings of around 14% compared to a uniformly blended hybrid with the same total material configuration. From this it is possible to estimate the materials cost of the configurations as well as the weight of the component. To determine which is best it is necessary to find an exchange constant that converts weight into cost – the penalty of carrying the extra weight. The value of this exchange constant will depend on the particular application

Physical limits to sensing material properties

Constitutive relations describe how materials respond to external stimuli such as forces. All materials respond heterogeneously at small scales, which limits what a localized sensor can discern about the global constitution of a material. In this paper, we quantify the limits of such constitutional sensing by determining the optimal measurement protocols for sensors embedded in disordered media. For an elastic medium, we find that the least fractional uncertainty with which a sensor can determine a material constant $\lambda_0$ is approximately \begin{equation*} \frac{\delta \lambda_0}{\lambda_0 } \sim \left( \frac{\Delta_{\lambda} }{ \lambda_0^2} \right)^{1/2} \left( \frac{ d }{ a } \right)^{D/2} \left( \frac{ \xi }{ a } \right)^{D/2} \end{equation*} for $a \gg d \gg \xi$, $\lambda_0 \gg \Delta_{\lambda}^{1/2}$, and $D>1$, where $a$ is the size of the sensor, $d$ is its spatial resolution, $\xi$ is the correlation length of fluctuations in the material constant, $\Delta_{\lambda}$ is the local variability of the material constant, and $D$ is the dimension of the medium. Our results reveal how one can construct microscopic devices capable of sensing near these physical limits, e.g. for medical diagnostics. We show how our theoretical framework can be applied to an experimental system by estimating a bound on the precision of cellular mechanosensing in a biopolymer network.Comment: 33 pages, 3 figure

Satellite material contaminant optical properties

The Air Force Wright Research and Development Center and the Arnold Engineering Development Center are continuing a program for measuring optical effects of satellite material outgassing products on cryo-optic surfaces. Presented here are infrared (4000 to 700 cm(-1)) transmittance data for contaminant films condensed on a 77 K geranium window. From the transmittance data, the contaminant film refractive and absorptive indices (n, k) were derived using an analytical thin-film interference model with a nonlinear least-squares algorithm. To date 19 materials have been studied with the optical contents determined for 13 of those. The materials include adhesives, paints, composites, films, and lubricants. This program is continuing and properties for other materials will be available in the future

Beyond local effective material properties for metamaterials

To discuss the properties of metamaterials on physical grounds and to consider them in applications, effective material parameters are usually introduced and assigned to a given metamaterial. In most cases, only weak spatial dispersion is considered. It allows to assign local material properties, i.e. a permittivity and a permeability. However, this turned out to be insufficient. To solve this problem, we study here the effective properties of metamaterials with constitutive relations beyond a local response and take strong spatial dispersion into account. The isofrequency surfaces of the dispersion relation are investigated and compared to those of an actual metamaterial. The significant improvement provides evidence for the necessity to use nonlocal material laws in the effective description of metamaterials. The general formulation we choose here renders our approach applicable to a wide class of metamaterials

Material Properties Measurements for Selected Materials

Hugoniot equation of state measurements were made on Coconino sandstone, Vacaville basalt, Kaibab limestone, Mono Crater, pumice and Zelux (a polycarbonate resin) for pressures to 2 Mb. A single data point was obtained for fused quartz at 1.6 Mb. In addition to the hugoniot studies, the uniaxial compressive stress behavior of Vacaville basalt and Zelux was investigated at strain rates from about 10(exp -5)/sec to 10(exp 3)/second. The data presented include the stress - strain relations as a function of strain rate for these two materials

Electromagnetic properties of material coated surfaces

The electromagnetic properties of material coated conducting surfaces were investigated. The coating geometries consist of uniform layers over a planar surface, irregularly shaped formations near edges and randomly positioned, electrically small, irregularly shaped formations over a surface. Techniques to measure the scattered field and constitutive parameters from these geometries were studied. The significance of the scattered field from these geometries warrants further study