Experimental investigations of the effects of cutting angle on chattering of a flexible manipulator

When a machine tool is mounted at the tip of a robotic manipulator, the manipulator becomes more flexible (the natural frequencies are lowered). Moreover, for a given flexible manipulator, its compliance will be different depending on feedback gains, configurations, and direction of interest. Here, the compliance of a manipulator is derived analytically, and its magnitude is represented as a compliance ellipsoid. Then, using a two-link flexible manipulator with an abrasive cut off saw, the experimental investigation shows that the chattering varies with the saw cutting angle due to different compliance. The main work is devoted to finding a desirable cutting angle which reduces the chattering

Dominating Manipulations in Voting with Partial Information

We consider manipulation problems when the manipulator only has partial information about the votes of the nonmanipulators. Such partial information is described by an information set, which is the set of profiles of the nonmanipulators that are indistinguishable to the manipulator. Given such an information set, a dominating manipulation is a non-truthful vote that the manipulator can cast which makes the winner at least as preferable (and sometimes more preferable) as the winner when the manipulator votes truthfully. When the manipulator has full information, computing whether or not there exists a dominating manipulation is in P for many common voting rules (by known results). We show that when the manipulator has no information, there is no dominating manipulation for many common voting rules. When the manipulator's information is represented by partial orders and only a small portion of the preferences are unknown, computing a dominating manipulation is NP-hard for many common voting rules. Our results thus throw light on whether we can prevent strategic behavior by limiting information about the votes of other voters.Comment: 7 pages by arxiv pdflatex, 1 figure. The 6-page version has the same content and will be published in Proceedings of the Twenty-Fifth AAAI Conference on Artificial Intelligence (AAAI-11

Control of a flexible bracing manipulator: Integration of current research work to realize the bracing manipulator

All research results about flexible manipulator control were integrated to show a control scenario of a bracing manipulator. First, dynamic analysis of a flexible manipulator was done for modeling. Second, from the dynamic model, the inverse dynamic equation was derived, and the time domain inverse dynamic method was proposed for the calculation of the feedforward torque and the desired flexible coordinate trajectories. Third, a tracking controller was designed by combining the inverse dynamic feedforward control with the joint feedback control. The control scheme was applied to the tip position control of a single link flexible manipulator for zero and non-zero initial condition cases. Finally, the contact control scheme was added to the position tracking control. A control scenario of a bracing manipulator is provided and evaluated through simulation and experiment on a single link flexible manipulator

Welding torch and wire feed manipulator

Welding torch and wire feed manipulator increase capability for performing automatic welding operations. The manipulator rotates on its horizontal axis to avoid obstacles as they approach the torch. The initial individual attitudes of the torch and wire guide are set with respect to the general configuration of the part

Evaluation of automated decision making methodologies and development of an integrated robotic system simulation: Study results

The implementation of a generic computer simulation for manipulator systems (ROBSIM) is described. The program is written in FORTRAN, and allows the user to: (1) Interactively define a manipulator system consisting of multiple arms, load objects, targets, and an environment; (2) Request graphic display or replay of manipulator motion; (3) Investigate and simulate various control methods including manual force/torque and active compliance control; and (4) Perform kinematic analysis, requirements analysis, and response simulation of manipulamotion. Previous reports have described the algorithms and procedures for using ROBSIM. These reports are superseded and additional features which were added are described. They are: (1) The ability to define motion profiles and compute loads on a common base to which manipulator arms are attached; (2) Capability to accept data describing manipulator geometry from a Computer Aided Design data base using the Initial Graphics exchange Specification format; (3) A manipulator control algorithm derived from processing the TV image of known reference points on a target; and (4) A vocabulary of simple high level task commands which can be used to define task scenarios

TeleOperator/telePresence System (TOPS) Concept Verification Model (CVM) development

The development of an anthropomorphic, undersea manipulator system, the TeleOperator/telePresence System (TOPS) Concept Verification Model (CVM) is described. The TOPS system's design philosophy, which results from NRaD's experience in undersea vehicles and manipulator systems development and operations, is presented. The TOPS design approach, task teams, manipulator, and vision system development and results, conclusions, and recommendations are presented

A six degrees of freedom MEMS manipulator

This thesis reports about a six degrees of freedom (DOF) precision manipulator in MEMS, concerning concept generation for the manipulator followed by design and fabrication (of parts) of the proposed manipulation concept in MEMS. Researching the abilities of 6 DOF precision manipulation in MEMS is part of the Multi Axes Micro Stage (MAMS) project in which the disciplines of precision engineering, control engineering and micro mechanical engineering are represented

Active force control of 3-RRR planar parallel manipulator

This paper presents a new and novel method to control a 3-RRR (revolute-revolute-revolute) planar parallel manipulator using an active force control (AFC) strategy. A traditional proportional-integral-derivative (PID) controller was first designed and developed to demonstrate the basic and stable response of the manipulator in performing trajectory tracking tasks. Later, the AFC section was incorporated into the control scheme in cascade form by adding it in series with the PID controller (PID+AFC), its primary aim of which is to improve the overall system dynamic performance particularly when the manipulator is subjected to different loading conditions. Results clearly illustrate the robustness and effectiveness of the proposed AFC-based scheme in rejecting the disturbances compared to the traditional PID controller

Geometric Construction-Based Realization of Spatial Elastic Behaviors in Parallel and Serial Manipulators

This paper addresses the realization of spatial elastic behavior with a parallel or a serial manipulator. Necessary and sufficient conditions for a manipulator (either parallel or serial) to realize a specific elastic behavior are presented and interpreted in terms of the manipulator geometry. These conditions completely decouple the requirements on component elastic properties from the requirements on mechanism kinematics. New construction-based synthesis procedures for spatial elastic behaviors are developed. With these synthesis procedures, one can select each elastic component of a parallel (or serial) mechanism based on the geometry of a restricted space of allowable candidates. With each elastic component selected, the space of allowable candidates is further restricted. For each stage of the selection process, the geometry of the remaining allowable space is described