22 research outputs found
Iterative receiver based on SAGE algorithm for crosstalk cancellation in upstream vectored VDSL
We propose the use of an iterative receiver based on the Space Alternating Generalized Expectation maximization (SAGE) algorithm for crosstalk cancellation in upstream vectored VDSL. In the absence of alien crosstalk, we show that when initialized with the frequency-domain equalizer (FEQ) output, the far-end crosstalk (FEXT) can be cancelled with no more real-time complexity than the existing linear receivers. In addition, the suggested approach does not require offline computation of the channel inverse and thus reduces the receiver complexity. In the presence of alien crosstalk, there is a significant gap between the rate performance of the linear receivers as compared with the single-user bound (SUB). The proposed receiver is shown to successfully bridge this gap while requiring only a little extracomplexity. Computer simulations are presented to validate the analysis and confirm the performance of the proposed receiver
Mitigation of impulsive noise for SISO and MIMO G.fast system
To address the demand for high bandwidth data transmission over telephone transmission lines, International Telecommunication Union (ITU)
has recently completed the fourth generation broadband (4GBB) copper
access network technology, known as G.fast.
Throughout this thesis, extensively investigates the wired broadband
G.fast coding system and the novel impulsive noise reduction technique
has been proposed to improve the performance of wired communications
network in three different scenarios: single-line Discrete Multiple Tone
(DMT)- G.fast system; a multiple input multiple-output (MIMO) DMTG.fast system, and MIMO G.fast system with different crosstalk cancellation methods. For each of these scenarios, however, Impulsive Noise
(IN) is considered as the main limiting factor of performance system.
In order to improve the performance of such systems, which use higher
order QAM constellation such as G.fast system, this thesis examines the
performance of DMT G.fast system over copper channel for six different
higher signal constellations of M = 32, 128, 512, 2048, 8192 and 32768 in
presence of IN modelled as the Middleton Class A (MCA) noise source.
In contrast to existing work, this thesis presents and derives a novel
equation of Optimal Threshold (OT) to improve the IN frequency domain mitigation methods applied to the G.fast standard over copper
channel with higher QAM signal constellations. The second scenario,
Multi-Line Copper Wire (MLCW) G.fast is adopted utilizing the proposed MLCW Chen model and is compared to a single line G-fast system
by a comparative analysis in terms of Bit-Error-Rate(BER) performance
of implementation of MLCW-DMT G.fast system. The third scenario,
linear and non-linear crosstalk crosstalk interference cancellation methods are applied to MLCW G.fas and compared by a comparative analysis
in terms of BER performance and the complexity of implementation.University of
Technology for choosing me for their PhD scholarship and The Higher
Committee For Education Development in Iraq(HCED
Orthogonal transmultiplexers : extensions to digital subscriber line (DSL) communications
An orthogonal transmultiplexer which unifies multirate filter bank theory and communications theory is investigated in this dissertation. Various extensions of the orthogonal transmultiplexer techniques have been made for digital subscriber line communication applications.
It is shown that the theoretical performance bounds of single carrier modulation based transceivers and multicarrier modulation based transceivers are the same under the same operational conditions. Single carrier based transceiver systems such as Quadrature Amplitude Modulation (QAM) and Carrierless Amplitude and Phase (CAP) modulation scheme, multicarrier based transceiver systems such as Orthogonal Frequency Division Multiplexing (OFDM) or Discrete Multi Tone (DMT) and Discrete Subband (Wavelet) Multicarrier based transceiver (DSBMT) techniques are considered in this investigation.
The performance of DMT and DSBMT based transceiver systems for a narrow band interference and their robustness are also investigated. It is shown that the performance of a DMT based transceiver system is quite sensitive to the location and strength of a single tone (narrow band) interference. The performance sensitivity is highlighted in this work. It is shown that an adaptive interference exciser can alleviate the sensitivity problem of a DMT based system. The improved spectral properties of DSBMT technique reduces the performance sensitivity for variations of a narrow band interference. It is shown that DSBMT technique outperforms DMT and has a more robust performance than the latter. The superior performance robustness is shown in this work.
Optimal orthogonal basis design using cosine modulated multirate filter bank is discussed. An adaptive linear combiner at the output of analysis filter bank is implemented to eliminate the intersymbol and interchannel interferences. It is shown that DSBMT is the most suitable technique for a narrow band interference environment.
A blind channel identification and optimal MMSE based equalizer employing a nonmaximally decimated filter bank precoder / postequalizer structure is proposed. The performance of blind channel identification scheme is shown not to be sensitive to the characteristics of unknown channel. The performance of the proposed optimal MMSE based equalizer is shown to be superior to the zero-forcing equalizer
Recommended from our members
A simple RLS-POCS solution for reduced complexity ADSL impulse shortening
Recently, with the realization of the World Wide Web, the tremendous need for high-speed data communications has grown. Several access techniques have been proposed which utilize the existing copper twisted pair cabling. Of these, the xDSL family, particularly ADSL and VDSL, have shown great promise in providing broadband or near-broadband access through the common telephone lines. A critical component of the ADSL and VDSL systems is the guard band needed to eliminate the interference caused by the previously transmitted blocks. This guard band must come in the form of redundant samples at the start of every transmit block, and be at least as long as the channel impulse response. Since the required guard band length is much greater than the length of the actual transmitted samples, techniques to shorten the channel impulse response must be considered. In this thesis, a new algorithm based on the RLS error minimization and POCS optimization techniques will be applied to the channel impulse-shortening problem in an ADSL environment. As will be shown, the proposed algorithm will provide a much better solution with a minimal increase in complexity as compared to the existing LMS techniques
Recommended from our members
Channel equalization to achieve high bit rates in discrete multitone systems
textMulticarrier modulation (MCM) techniques such as orthogonal frequency division
multiplexing (OFDM) and discrete multi-tone (DMT) modulation are attractive
for high-speed data communications due to the ease with which MCM can combat
channel dispersion. With all the benefits MCM could give, DMT modulation has an
extra ability to perform dynamic bit loading, which has the potential to exploit fully
the available bandwidth in a slowly time-varying channel. In broadband wireline
communications, DMT modulation is standardized for asymmetric digital subscribe
line (ADSL) and very-high-bit-rate digital subscriber line (VDSL) modems. ADSL
and VDSL standards are used by telephone companies to provide high speed data
service to residences and offices.
In an ADSL receiver, an equalizer is required to compensate for the channel’s
dispersion in the time domain and the channel’s distortion in the frequency domain
of the transmitted waveform. This dissertation proposes design methods for linear
equalizers to increase the bit rate of the connection. The methods are amenable
to implementation on programmable fixed-point digital signal processors, which are
employed in ADSL/VDSL transceivers.
A conventional ADSL equalizer consists of a time-domain equalizer, a fast
Fourier transform, and a frequency domain equalizer. The time domain equalizer
(TEQ) is a finite impulse response filter that when coupled with a discretized channel
produces an equivalent channel whose impulse response is shorter than that of
the discretized channel. This channel shortening is required by the ADSL standards.
In this dissertation, I first propose a linear phase TEQ design that exploits symmetry
in existing eigen-filter approaches such as minimum mean square error(MMSE),
maximum shortening signal to noise ratio (MSSNR) and minimum intersymbol interference
(Min-ISI) equalizers. TEQs with symmetric coefficients can reach the
same performance as non-symmetric ones with much lower training complexity.
Second, I improve Min-ISI design. I reformulate the cost function to make
long TEQs design feasible. I remove the dependency of transmission delay in order
to reduce the complexity associated with delay optimization. The quantized
weighting is introduced to further lower the complexity. I also propose an iterative
optimization procedure of Min-ISI that completely avoids Cholesky decomposition
hence is better suited for a fixed-point implementation.
Finally I propose a dual-path TEQ structure, which designs a standard singleFIR
TEQ to achieve good bit rate over the entire transmission bandwidth, and
designs another FIR TEQ to improve the bit rate over a subset of subcarriers. Dualpath
TEQ can be viewed as a special case of a complex valued filter bank structure
that delivers the best bit rate of existing DMT equalizers. However, dual-path
TEQ provides a very good tradeoff between achievable bit rate vs. implementation
complexity on a programmable digital signal processor.Electrical and Computer Engineerin