Ionization by bulk heating of electrons in capacitive radio frequency atmospheric pressure microplasmas

Electron heating and ionization dynamics in capacitively coupled radio frequency (RF) atmospheric pressure microplasmas operated in helium are investigated by Particle in Cell simulations and semi-analytical modeling. A strong heating of electrons and ionization in the plasma bulk due to high bulk electric fields are observed at distinct times within the RF period. Based on the model the electric field is identified to be a drift field caused by a low electrical conductivity due to the high electron-neutral collision frequency at atmospheric pressure. Thus, the ionization is mainly caused by ohmic heating in this "Omega-mode". The phase of strongest bulk electric field and ionization is affected by the driving voltage amplitude. At high amplitudes, the plasma density is high, so that the sheath impedance is comparable to the bulk resistance. Thus, voltage and current are about 45{\deg} out of phase and maximum ionization is observed during sheath expansion with local maxima at the sheath edges. At low driving voltages, the plasma density is low and the discharge becomes more resistive resulting in a smaller phase shift of about 4{\deg}. Thus, maximum ionization occurs later within the RF period with a maximum in the discharge center. Significant analogies to electronegative low pressure macroscopic discharges operated in the Drift-Ambipolar mode are found, where similar mechanisms induced by a high electronegativity instead of a high collision frequency have been identified

Ionization wave propagation on a micro cavity plasma array

Microcavity plasma arrays of inverse pyramidal cavities have been fabricated in p-Si wafers. Each cavity acts as a microscopic dielectric barrier discharge. Operated at atmospheric pressure in argon and excited with high voltage at about 10 kHz, each cavity develops a localized microplasma. Experiments have shown a strong interaction of individual cavities, leading to the propagation of wave-like optical emission structures along the surface of the array. This phenomenon is numerically investigated using computer simulation. The observed ionization wave propagates with a speed of about 5 km/s, which agrees well the experimental findings. It is found that the wave propagation is due to sequential contributions of a drift of electrons followed by drift of ions between cavities seeded by photoemission of electrons by the plasma in adjacent cavities

Silicon microcavity and microchannel plasma devices: spectroscopy and time-resolved optical experiments

Novel microcavity and microchannel plasma devices in Si have provided new and efficient sources of visible, ultraviolet (UV) and vacuum ultraviolet (VUV) radiation. The realization of this new platform for devices is implemented through VLSI and MEMS fabrication techniques. In this thesis, the basic physics of plasma discharges is presented, and the performance of Si microplasma devices with inverted pyramidal cavity and V-grooved channel configurations is described in some detail

The application of the scanning electron microscope to studies of current multiplication, avalanche breakdown and thermal runaway. Part 2 - General studies, mainly non-thermal

Scanning electron microscope applications in study of current multiplication, avalanche breakdown, and thermal runaway - Nonthermal effects in Read diode

Roles of Free Electrons and H2O2 in the Optical Breakdown-Induced Photochemical Reduction of Aqueous [AuCl4]-

Free electrons and H2O2 formed in an optical breakdown plasma are found to directly control the kinetics of [AuCl4]− reduction to form Au nanoparticles (AuNPs) during femtosecond laser-assisted synthesis of AuNPs. The formation rates of both free electrons and H2O2 strongly depend on the energy and duration of the 800 nm laser pulses over the ranges of 10−2400 μJ and 30−1500 fs. By monitoring the conversion of [AuCl4]− to AuNPs using in situ UV−vis spectroscopy during laser irradiation, the first- and second-order rate constants in the autocatalytic rate law, k1 and k2, were extracted and compared to the computed free electron densities and experimentally measured H2O2 formation rates. For laser pulse energies of 600 μJ and lower at all pulse durations, the first-order rate constant, k1, was found to be directly proportional to the theoretically calculated plasma volume, in which the electron density exceeds the threshold value of 1.8 × 1020 cm−3. The second-order rate constant, k2, was found to correlate with the measured H2O2 formation rate at all pulse energies and durations, resulting in the empirical relationship k2 ≈ H2O20.5. We have demonstrated that the relative composition of free electrons and H2O2 in the optical breakdown plasma may be controlled by changing the pulse energy and duration, which may make it possible to tune the size and dispersity of AuNPs and other metal nanoparticle products synthesized with femtosecond laser-based methods

Optical Limiting in Single-walled Carbon Nanotube Suspensions

Optical limiting behaviour of suspensions of single-walled carbon nanotubes in water, ethanol and ethylene glycol is reported. Experiments with 532 nm, 15 nsec duration laser pulses show that optical limiting occurs mainly due to nonlinear scattering. The observed host liquid dependence of optical limiting in different suspensions suggests that the scattering originates from microbubbles formed due to absorption-induced heating.Comment: 10 pages, 5 eps figures, to appear in Chem. Phys. Let