Microchip electrophoresis bioanalytical applications

Microchip electrophoresis (MCE) is a novel analytical technique resulting from miniaturization of capillary electrophoresis (CE) to a planar microfabricated separation device. The consequences of the transfer of CE to MCE in terms of benefits and drawbacks have been identified and commented. The strategies developed to overcome the unfavourable features of the chip with respect to the capillary are briefly described. A method for simultaneous separation of catecholamines and their cationic metabolites has been developed on the microchip. The addition of three modifiers was required to resolve all analytes. The sensitivity of on-chip amperometric detection has been improved by employing an enzyme-catalyzed reaction on the amperometric electrode, as well as by using a carbon nanotube-modified electrode. The developed analytical methodology has been successfully applied for a direct on-chip determination of catecholamines and their metabolites in a mouse brain homogenate. The feasibility of performing affinity measurements as well as isoelectric focusing on the microchip has been demonstrated and available applications of these two electrophoretic modes on a chip have been reviewed. A commercial Shimadzu microchip station has for the first time been applied for high-throughput microchip isoelectric focusing of therapeutic proteins and obtained results have been compared to conventional capillary isoelectric focusing

Miniaturization of flight deflection measurement system

A flight deflection measurement system is disclosed including a hybrid microchip of a receiver/decoder. The hybrid microchip decoder is mounted piggy back on the miniaturized receiver and forms an integral unit therewith. The flight deflection measurement system employing the miniaturized receiver/decoder can be used in a wind tunnel. In particular, the miniaturized receiver/decoder can be employed in a spin measurement system due to its small size and can retain already established control surface actuation functions

Time Enough - Consequences of Human Microchip Implantation

Dr. Ramesh argues that microchip implantation is both possible and, for some purposes, desirable and suggests that now is the time to consider strategies for preventing potentially grievous intrusion into personal privacy

A microchip optomechanical accelerometer

The monitoring of accelerations is essential for a variety of applications ranging from inertial navigation to consumer electronics. The basic operation principle of an accelerometer is to measure the displacement of a flexibly mounted test mass; sensitive displacement measurement can be realized using capacitive, piezo-electric, tunnel-current, or optical methods. While optical readout provides superior displacement resolution and resilience to electromagnetic interference, current optical accelerometers either do not allow for chip-scale integration or require bulky test masses. Here we demonstrate an optomechanical accelerometer that employs ultra-sensitive all-optical displacement read-out using a planar photonic crystal cavity monolithically integrated with a nano-tethered test mass of high mechanical Q-factor. This device architecture allows for full on-chip integration and achieves a broadband acceleration resolution of 10 \mu g/rt-Hz, a bandwidth greater than 20 kHz, and a dynamic range of 50 dB with sub-milliwatt optical power requirements. Moreover, the nano-gram test masses used here allow for optomechanical back-action in the form of cooling or the optical spring effect, setting the stage for a new class of motional sensors.Comment: 16 pages, 9 figure

Coherence in Microchip Traps

We report the coherent manipulation of internal states of neutral atoms in a magnetic microchip trap. Coherence lifetimes exceeding 1 s are observed with atoms at distances of $5-130 \mu$m from the microchip surface. The coherence lifetime in the chip trap is independent of atom-surface distance within our measurement accuracy, and agrees well with the results of similar measurements in macroscopic magnetic traps. Due to the absence of surface-induced decoherence, a miniaturized atomic clock with a relative stability in the $10^{-13}$ range can be realized. For applications in quantum information processing, we propose to use microwave near-fields in the proximity of chip wires to create potentials that depend on the internal state of the atoms.Comment: Revised version, accepted for publication in Phys. Rev. Lett., 4 pages, 4 figure

Propagation of Bose-Einstein condensates in a magnetic waveguide

Gaseous Bose-Einstein condensates of 2-3 million atoms were loaded into a microfabricated magnetic trap using optical tweezers. Subsequently, the condensates were released into a magnetic waveguide and propagated 12 mm. Single-mode propagation was observed along homogeneous segments of the waveguide. Inhomogeneities in the guiding potential arose from geometric deformations of the microfabricated wires and caused strong transverse excitations. Such deformations may restrict the waveguide physics that can be explored with propagating condensates.Comment: 5 pages, 4 figure

Experimental comparison of autodyne and heterodyne laser interferometry using a Nd:YVO4 microchip laser

Using a Nd:YVO4 microchip laser with a relaxation frequency in the megahertz range, we have experimentally compared a heterodyne interferometer based on a Michelson configuration with an autodyne interferometer based on the laser optical feedback imaging (LOFI) method regarding their signal to noise ratios. In the heterodyne configuration, the beating between the reference beam and the signal beam is realized outside the laser cavity while in the autodyne configuration, the wave beating takes place inside the laser cavity and the relaxation oscillations of the laser intensity then play an important part. For a given laser output power, object under investigation and detection noise level, we have determined the amplification gain of the LOFI interferometer compared to the heterodyne interferometer. LOFI interferometry is demonstrated to show higher performances than heterodyne interferometry for a wide range of laser power and detection level of noise. The experimental results are in good agreement with the theoretical predictions

A Compact Microchip-Based Atomic Clock Based on Ultracold Trapped Rb Atoms

We propose a compact atomic clock based on ultracold Rb atoms that are magnetically trapped near the surface of an atom microchip. An interrogation scheme that combines electromagnetically-induced transparency (EIT) with Ramsey's method of separated oscillatory fields can achieve atomic shot-noise level performance of 10^{-13}/sqrt(tau) for 10^6 atoms. The EIT signal can be detected with a heterodyne technique that provides noiseless gain; with this technique the optical phase shift of a 100 pW probe beam can be detected at the photon shot-noise level. Numerical calculations of the density matrix equations are used to identify realistic operating parameters at which AC Stark shifts are eliminated. By considering fluctuations in these parameters, we estimate that AC Stark shifts can be canceled to a level better than 2*10^{-14}. An overview of the apparatus is presented with estimates of duty cycle and power consumption.Comment: 15 pages, 11 figures, 5 table