Spin-Transfer-Torque (STT) Devices for On-chip Memory and Their Applications to Low-standby Power Systems

With the scaling of CMOS technology, the proportion of the leakage power to total power consumption increases. Leakage may account for almost half of total power consumption in high performance processors. In order to reduce the leakage power, there is an increasing interest in using nonvolatile storage devices for memory applications. Among various promising nonvolatile memory elements, spin-transfer torque magnetic RAM (STT-MRAM) is identified as one of the most attractive alternatives to conventional SRAM. However, several design challenges of STT-MRAM such as shared read and write current paths, single-ended sensing, and high dynamic power are major challenges to be overcome to make it suitable for on-chip memories. To mitigate such problems, we propose a domain wall coupling based spin-transfer torque (DWCSTT) device for on-chip caches. Our proposed DWCSTT bit-cell decouples the read and the write current paths by the electrically-insulating magnetic coupling layer so that we can separately optimize read operation without having an impact on write-ability. In addition, the complementary polarizer structure in the read path of the DWCSTT device allows DWCSTT to enable self-referenced differential sensing. DWCSTT bit-cells improve the write power consumption due to the low electrical resistance of the write current path. Furthermore, we also present three different bit-cell level design techniques of Spin-Orbit Torque MRAM (SOT-MRAM) for alleviating some of the inefficiencies of conventional magnetic memories while maintaining the advantages of spin-orbit torque (SOT) based novel switching mechanism such as low write current requirement and decoupled read and write current path. Our proposed SOT-MRAM with supporting dual read/write ports (1R/1W) can address the issue of high-write latency of STT-MRAM by simultaneous 1R/1W accesses. Second, we propose a new type of SOT-MRAM which uses only one access transistor along with a Schottky diode in order to mitigate the area-overhead caused by two access transistors in conventional SOT-MRAM. Finally, a new design technique of SOT-MRAM is presented to improve the integration density by utilizing a shared bit-line structure

Magnonic spin-transfer torque MRAM with low power, high speed, and error-free switching

A new class of spin-transfer torque magnetic random access memory (STT-MRAM) is discussed, in which writing is achieved using thermally initiated magnonic current pulses as an alternative to conventional electric current pulses. The magnonic pulses are used to destabilize the magnetic free layer from its initial direction, and are followed immediately by a bipolar electric current exerting conventional spin-transfer torque on the free layer. The combination of thermal and electric currents greatly reduces switching errors, and simultaneously reduces the electric switching current density by more than an order of magnitude as compared to conventional STT-MRAM. The energy efficiency of several possible electro-thermal circuit designs have been analyzed numerically. As compared to STT-MRAM with perpendicular magnetic anisotropy, magnonic STT-MRAM reduces the overall switching energy by almost 80%. Furthermore, the lower electric current density allows the use of thicker tunnel barriers, which should result in higher tunneling magneto-resistance and improved tunnel barrier reliability. The combination of lower power, improved reliability, higher integration density, and larger read margin make magnonic STT-MRAM a promising choice for future non-volatile storage.Comment: 9 Pages, 11 Figure