RIS-Assisted Generalized Receive Quadrature Spatial Modulation

In this paper, reconfigurable intelligent surface (RIS)-assisted generalized receive quadrature spatial modulation (RIS-GRQSM) is proposed to improve the spectral efficiency of RIS-aided quadrature spatial modulation (QSM) systems by utilizing the concept of generalized spatial modulation (GSM). That is, multiple antennas are activated at the receiver independently for both the real and imaginary parts. We propose a max-min optimization problem to adjust the phase shifts of all RIS elements to maximize the relevant signal-to-noise ratios (SNRs) at all activated receive antennas. Using Lagrange duality, the non-convex optimization problem involving the phase shifts of all RIS elements reduces to a convex optimization involving a number of variables equal to the number of activated receive antennas. A successive greedy detector (GD) can be used at the receiver to detect the active antennas, which simplifies the detection process. The numerical results show that the proposed scheme outperforms the benchmark schemes in terms of error rate performance, especially in systems with a larger number of receive antennas. In the special case where each receive antenna corresponds to a user and is activated, the RIS-GRQSM system becomes a multicast communication system. In this context, in contrast to existing phase shift optimization algorithms which exhibit an impractical level of complexity, our proposed solution offers the advantage of low complexity and practical feasibility of implementation.Comment: 6 pages (2-column), 5 figures, 1 table, Prepared for Globcom 2023 conferenc

Architecture Design and Implementation of the Metric First List Sphere Detector Algorithm

Soft-output detection of a multiple-input–multiple-output (MIMO) signal pose a significant challenge in future wireless systems. In this paper, we introduce a soft-output modified metric first (MMF)-LSD algorithm for MIMO detection. We design a scalable architecture and address a method to decrease memory requirements. We provide implementation results for a spatial multiplexing (SM) system with four transmitted streams and with 16- and 64-quadrature amplitude modulation (QAM) on a 0.18- m CMOS application specific integrated circuit (ASIC) technology. The MFF-LSD implementation is more efficient than the depth first (DF) -LSD in the crucial low signal-to-noise rate (SNR)region and the detection rate of the 64-QAM implementation is 39.2 Mbps@26 db with 48.2 kGEs complexity

Semi-blind adaptive spatial equalisation for MIMO systems with high-order QAM signalling

This contribution investigates semi-blind adaptive spatial filtering or equalisation for multiple-input multiple-output (MIMO) systems that employ high-throughput quadrature amplitude modulation (QAM) signalling. A minimum number of training symbols, equal to the number of receivers (we assume that the number of transmitters is no more than that of receivers), are first utilized to provide a rough least squares channel estimate of the system's MIMO channel matrix for the initialization of the spatial equalizers' weight vectors. A constant modulus algorithm aided soft decision-directed blind algorithm, originally derived for blind equalization of single-input single-output and single-input multiple-output systems employing high-order QAM signalling, is then extended to adapt the spatial equalizers for MIMO systems. This semi-blind scheme has a low computational complexity, and our simulation results demonstrate that it converges fast to the minimum mean-square-error spatial equalization solution

Unified bit-based probabilistic data association aided MIMO detection for high-order QAM constellations

A unified Bit-based Probabilistic Data Association (B-PDA) detection approach is proposed for Multiple-Input Multiple-Output (MIMO) systems employing high-order rectangular Quadrature Amplitude Modulation (QAM). The new approach transforms the symbol detection process of QAM to a bit-based process by introducing a Unified Matrix Representation (UMR) of QAM. Both linear natural and nonlinear binary reflected Gray bit-to-symbol mappings are considered. With the aid of simulation results, we demonstrate that the linear natural mapping based B-PDA approach typically attained an improved detection performance (measured in terms of both Bit Error Ratio (BER) and Symbol Error Ratio (SER)) in comparison to the conventional symbol-based PDA aided MIMO detector, despite its dramatically reduced computational complexity. The only exception is that at low SNRs, the linear natural mapping based B-PDA is slightly inferior in terms of its BER to the conventional symbol-based PDA using binary reflected Gray mapping. Furthermore, the simulation results show that the linear natural mapping based B-PDA MIMO detector may approach the best-case performance provided by the nonlinear binary reflected Gray mapping based B-PDA MIMO detector under ideal conditions. Additionally, the implementation of the B-PDA MIMO detector is shown to be much simpler in the case of the linear natural mapping. Based on these two points, we conclude that in the context of the uncoded B-PDA MIMO detector it is preferable to use the linear natural bit-to-symbol mapping, rather than the nonlinear Gray mapping

Single-RF spatial modulation requires single-carrier transmission: frequency-domain turbo equalization for dispersive channels

In this paper, we propose a broadband single-carrier (SC) spatial-modulation (SM) based multiple-input multipleoutput (MIMO) architecture relying on a soft-decision (SoD) frequency-domain equalization (FDE) receiver. We demonstrate that conventional orthogonal frequency-division multiplexing (OFDM)-based broadband transmissions are not readily suitable for the single–radio frequency (RF) assisted SM-MIMO schemes, since this scheme does not exhibit any substantial performance advantage over single-antenna transmissions. To circumvent this limitation, a low-complexity soft-decision (SoD) FDE algorithm based on the minimum mean-square error (MMSE) criterion is invoked for our broadband SC-based SM-MIMO scheme, which is capable of operating in a strongly dispersive channel having a long channel impulse response (CIR) at a moderate decoding complexity. Furthermore, our SoD FDE attains a near-capacity performance with the aid of a three-stage concatenated SC-based SM architecture