VLSI Design

This book provides some recent advances in design nanometer VLSI chips. The selected topics try to present some open problems and challenges with important topics ranging from design tools, new post-silicon devices, GPU-based parallel computing, emerging 3D integration, and antenna design. The book consists of two parts, with chapters such as: VLSI design for multi-sensor smart systems on a chip, Three-dimensional integrated circuits design for thousand-core processors, Parallel symbolic analysis of large analog circuits on GPU platforms, Algorithms for CAD tools VLSI design, A multilevel memetic algorithm for large SAT-encoded problems, etc

Free-space holographic optical interconnects in dichromated gelatin

Abstract unavailable please refer to PDF

High-Performance Computing for the Electromagnetic Modeling and Simulation of Interconnects

The electromagnetic modeling of packages and interconnects plays a very important role in the design of high-speed digital circuits, and is most efficiently performed by using computer-aided design algorithms. In recent years, packaging has become a critical area in the design of high-speed communication systems and fast computers, and the importance of the software support for their development has increased accordingly. Throughout this project, our efforts have focused on the development of modeling and simulation techniques and algorithms that permit the fast computation of the electrical parameters of interconnects and the efficient simulation of their electrical performance

The effect of an optical network on-chip on the performance of chip multiprocessors

Optical networks on-chip (ONoC) have been proposed to reduce power consumption and increase bandwidth density in high performance chip multiprocessors (CMP), compared to electrical NoCs. However, as buffering in an ONoC is not viable, the end-to-end message path needs to be acquired in advance during which the message is buffered at the network ingress. This waiting latency is therefore a combination of path setup latency and contention and forms a significant part of the total message latency. Many proposed ONoCs, such as Single Writer, Multiple Reader (SWMR), avoid path setup latency at the expense of increased optical components. In contrast, this thesis investigates a simple circuit-switched ONoC with lower component count where nodes need to request a channel before transmission. To hide the path setup latency, a coherence-based message predictor is proposed, to setup circuits before message arrival. Firstly, the effect of latency and bandwidth on application performance is thoroughly investigated using full-system simulations of shared memory CMPs. It is shown that the latency of an ideal NoC affects the CMP performance more than the NoC bandwidth. Increasing the number of wavelengths per channel decreases the serialisation latency and improves the performance of both ONoC types. With 2 or more wavelengths modulating at 25 Gbit=s , the ONoCs will outperform a conventional electrical mesh (maximal speedup of 20%). The SWMR ONoC outperforms the circuit-switched ONoC. Next coherence-based prediction techniques are proposed to reduce the waiting latency. The ideal coherence-based predictor reduces the waiting latency by 42%. A more streamlined predictor (smaller than a L1 cache) reduces the waiting latency by 31%. Without prediction, the message latency in the circuit-switched ONoC is 11% larger than in the SWMR ONoC. Applying the realistic predictor reverses this: the message latency in the SWMR ONoC is now 18% larger than the predictive circuitswitched ONoC

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

Multi-chip module interconnections at microwave frequencies: electromagnetic simulation and material characterisation

In this work both the interconnections and materials used in multi-chip modules (MCMs) at microwave frequencies have been investigated. The electrical behaviour of the interconnections was studied using commercially available 2.SD and 3D electromagnetic simulators (HFSSTM, MDSTM and Momentum™). State-of-the-art conductive and dielectric film materials used in the fabrication of multi-layer MCM structures were characterized using microstrip/wave guide resonator techniques. The models chosen for simulation of interconnections are commensurate with those in current use in MCM technology. Crosstalk between microstrip conductors in multi-layer MCM structures was simulated and new knowledge leading to new design rules was obtained.Typical elements in MCM interconnect structures, such as vias, bends and airbridges were also investigated. The principal features of these elements were simulated and the results were obtained in S-parameter form. Based on the simulated results, these parasitic elements were modelled in terms of their equivalent circuits which can be used in circuit simulators to aid more rigorous MCM circuit design. A microstrip ring resonator, fabricated using the newly developed conductive material from Heraeus, was employed to measure the line loss. New techniques have been developed to measure the permittivity and loss tangent of thin dielectric films. In the previous methods for the measurement of these films, the accuracy in measuring the relative permittivity is limited and there is no available technique to measure the loss tangent. A novel cavity perturbation method was developed to accurately measure both the relative permittivity and loss tangent of the films deposited on a supporting substrate. An additional independent technique, derived from transmission line theory, for measuring the relative permittivity of dielectric film was also established. A particular feature of the new teclmiques, which led to high accuracy in measuring dielectric constant and loss tangent was the positioning of the dielectric film in the region of maximum electric field strength, thereby ensuring maximum interaction between the electric field and the film material. A rigorous error analysis was performed on the new techniques, which led to the establishment of practical measurement correction factors. A simple and rigorous method has also been developed to accurately measure the loss tangent of dielectrics with known dielectric constant using a resonant cavity. The novel method eliminates the need for any physical measurement of the dielectric sample. The new technique should permit the development of techniques for very high frequency characterisation of dielectric materials

Polymer waveguide based optical interconnects for high-speed on-board communications

This dissertation presents a study of multimode polymer waveguide technology for use in board-level communication links for future data centres and supercomputers. The motivation for this work comes from the severe interconnection bandwidth challenges faced by the conventional electrical interconnections technology and the potential performance advantages of optical interconnections. This thesis presents the work to address the bandwidth bottleneck by developing high-bandwidth multimode polymer waveguides. The use of multimode waveguides provides relaxed alignment tolerances enabling low-cost assembly tools. Siloxane polymer materials developed by Dow Corning Corporation are chosen to form the waveguides in this work due to their favourable optical properties (optical losses as low as 0.03 dB/cm and the ability to withstand temperatures in excess of 350 °C) that allow the waveguides to be directly integrated on printed circuits boards (PCBs) using conventional manufacturing processes. Useful design rules for the use of the multimode polymer waveguides are theoretically derived while the bandwidth-length products are investigated under various launch conditions. Frequency-domain measurements and ultra-short pulse measurements are then carried out to investigate the bandwidth performance of the polymer waveguides under different launch conditions and with lateral misalignments. The instrument-limited frequency-domain measurements show that these waveguides exhibit bandwidth-length products (BLPs) of at least 35 GHz×m, while the pulse broadening measurements reveal the actual BLPs to be in excess of 70 GHz×m under a 50 μm multimode-fibre (MMF) launch and 100 GHz×m for a restricted launch across a wide range of input offsets (>±10 μm). This shows the potential for data transmission rates of 100 Gb/s and beyond over a single waveguide channel. A theoretical model is developed using the measured refractive index profile and good agreement with the above experimental results is found. The effects of graded refractive index profiles on the performance of waveguide components (bends, crossings) are also investigated, demonstrating that appropriate refractive index engineering can provide enhanced waveguide loss performance while exhibiting adequate bandwidth. Waveguide bends with excess loss below 1 dB for a radius >6 mm, crossings with loss less than 0.02 dB/crossing while exhibiting adequate link bandwidth (>47 GHz×m) can be achieved for a MMF launch. On this basis, advanced modulation formats are investigated across the board-level waveguide links for further increasing the on-board data rates. Record NRZ-based 40 Gb/s and 56 Gb/s PAM-4 based data transmission over a 1 m long multimode polymer spiral waveguide are theoretically and experimentally demonstrated

Caractérisation et modélisation d'interconnexions. Développement de nouvelles solutions pour la transmission d'informations au sein des cartes et puces électroniques.

Since the first IC in 1959 the performances and computing capacity of electronic devices have always grown, following thus the well-known empirical Moore’s law which says that the number of transistors in a dense integrated circuit doubles approximately every 18 months. This prevision is still verified even if some limitations appears like for example the limitation of the clock frequency which grow less than the projection that the ITRS (International Technology Roadmap for Semiconductors) has made in 2000. One of the stumbling point comes from interconnects which ensure the transmission of information inside electronic chips or cards. The interconnects imply delay, signal distortion, crosstalk and power dissipation and they now must be taken into account during electronic device design. So the researches depicted in this manuscript deal with the modelling of interconnect and study of new solutions to overcome problems due to classical interconnects. These works have been realized in Lab-STICC laboratory with the help of colleagues, post-doc, PhDs and Master Students. The manuscript include three chapters, the first one concerns researches on modelling aspects, the second is about alternative solutions to classical wired interconnects and to conclude the research projects for the next years are presented.The first chapter concern researches about modelling which aim to develop reliable models in view to simulate more quickly the electrical behavior of interconnects. Firstly the collaborations concerning the development of model-order reduction are presented. Then with the aim to evaluate the impact of inductive behavior, the current return patch problem and so the extraction of loop inductance is treated. The 3D discontinuities and 3D environment effects are presented in the third part of this chapter. For example the parallel grid influences on propagation are explored as well as the case of coupling between microvias and parallel-plates cavities inside multilayer PCB.The second chapter is about research of new solutions to overcome the limitation due to classical wired interconnects. A review of envisaged alternative solutions like for example optical interconnects and CNT (carbon Nano Tube) is first presented. Then a focus on RF guided interconnect is made and constraints in term of bandwidth are explained and some coupling techniques are explored. These studies naturally lead to exploration of the paradigm of wireless interconnects and the preliminary researches on radio transmission between two circuits placed on a PCB are shown. All these approaches of RF wireless interconnect are prelude to the research projects which are developed in a third chapter of the manuscript.The development of the draft over 4 years is based on the BBC project (wireless interconnect network on chip or in board for Broadcast-Based parallel Computing) funded by the Labex COMINLABS and which will begin in October 2016. The aims of this project are outlined as well as the aims of another project entitled “BROADWAYS” (Broadcast-Based new paradigms of ubiquitous memory mapping, bandwidth allocation and parallel programing made possible by Radio Network On Chip) which is currently in the second step of review by the ANR. To conclude this research part other embryonic researches are presented as well as long term researches envisaged like terahertz applications of the use of graphene for microwave applications.Depuis les premiers circuits intégrés en 1959 les composants et les systèmes électroniques n’ont cessé de voir leurs performances augmenter suivant ainsi la loi empirique de Gordon Moore qui prévoit un doublement de la complexité des circuits tous les 18 mois. Cette prévision reste aujourd’hui toujours vérifiée même si nous constatons depuis une dizaine d’années que les fréquences d’horloges stagnent autour de 4-5 GHz alors que l’ITRS (International Technology Roadmap for Semiconductors) prévoyait dans les années 2000 des fréquences de travail pouvant atteindre 40 GHz pour 2016. L’un des facteurs limitant la progression des performances vient des interconnexions métalliques servant au transport de l’information au sein des systèmes électroniques. Les travaux de recherche présentés dans le cadre de l’obtention de l‘habilitation à diriger des recherches concernent d’une part les travaux réalisés sur la modélisation des interconnexions et d’autre part ceux sur l’étude de solutions alternatives à ces interconnexions classiques. Ces travaux ont été réalisés au sein du Lab-STICC en collaboration avec plusieurs collègues et lors de l’encadrement de plusieurs post-doctorants, doctorants et stagiaires de master recherche. Le mémoire comporte trois chapitres principaux, le premier concerne les travaux sur la modélisation des interconnexions, le second porte sur l’étude de solutions alternatives à ces interconnexions classiques et le dernier permet la présentation des projets de recherches pour les prochaines années.L’objectif de nos travaux sur la modélisation des interconnexions consiste au développement de modèles fiables permettant d’appréhender leurs effets sur les signaux. Dans un premier temps, les travaux portant sur l’obtention de modèles à complexité réduite sont présentés. Puis, afin d’évaluer l’impact des effets inductifs des interconnexions, nous présentons les travaux sur l’identification des chemins de retours du courant dans un réseau comprenant plusieurs lignes et qui sont nécessaires pour déterminer les inductances de boucles. La prise en compte de l’environnement 3D des interconnexions fait l’objet de la troisième partie de ce chapitre. Nous traitons ainsi de l’influence de différentes discontinuités et nous présentons des règles de design permettant la limitation des risques de conversion de mode de propagation. Dans le cadre de structures multicouches, nous abordons l’influence de grilles métalliques placées au voisinage d’une ligne sur la propagation des signaux. Enfin nous traitons des risques de couplage entre des vias et les modes de cavités au sein des structures PCB multicouches.La seconde thématique développée dans ce mémoire porte sur le développement de solutions alternatives aux interconnexions classiques. Après avoir listé certaines de ces solutions telle que les interconnexions optiques ou les nanotubes de carbone, nous présentons plus particulièrement les interconnexions RF qui véhiculent l’information numérique sur porteuse à haute fréquence. Dans un premier temps nous analysons les interconnexions RF guidées qui utilisent une ligne de transmission comme support pour transporter l’information. A partir de l’étude des modes d’accès multiples nous montrons que les canaux doivent être large bande et nous explorons diverses façons de transmettre l’énergie à la ligne de transmission. Enfin nous présentons quelques exemples de performances obtenues à l’aide de démonstrateurs numériques. Ces études des interconnexions RF guidées nous ont naturellement amené à considérer les possibilités de transmission par voie hertzienne des informations au sein des cartes et puces électroniques. Nous avons ainsi analysé à l’aide de démonstrateurs très simples les niveaux de transmission entre deux circuits placés sur une même carte PCB (Printed Circuit Board).Ces études initiales sur les interconnexions radios ou sans fils servent de point d’appui aux projets de recherche présentés à la fin de ce manuscrit. La philosophie du projet BBC (wireless interconnect network on chip or in board for Broadcast-Based parallel Computing) financé par le Labex COMINLABS à partir d’octobre est présenté de même que celle du projet ANR Broadways (Broadcast-Based new paradigms of ubiquitous memory mapping, bandwidth allocation and parallel programing made possible by Radio Network On Chip) en seconde phase d’étude auprès de l’ANR

High-Speed and Low-Energy On-Chip Communication Circuits.

Continuous technology scaling sharply reduces transistor delays, while fixed-length global wire delays have increased due to less wiring pitch with higher resistance and coupling capacitance. Due to this ever growing gap, long on-chip interconnects pose well-known latency, bandwidth, and energy challenges to high-performance VLSI systems. Repeaters effectively mitigate wire RC effects but do little to improve their energy costs. Moreover, the increased complexity and high level of integration requires higher wire densities, worsening crosstalk noise and power consumption of conventionally repeated interconnects. Such increasing concerns in global on-chip wires motivate circuits to improve wire performance and energy while reducing the number of repeaters. This work presents circuit techniques and investigation for high-performance and energy-efficient on-chip communication in the aspects of encoding, data compression, self-timed current injection, signal pre-emphasis, low-swing signaling, and technology mapping. The improved bus designs also consider the constraints of robust operation and performance/energy gains across process corners and design space. Measurement results from 5mm links on 65nm and 90nm prototype chips validate 2.5-3X improvement in energy-delay product.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/75800/1/jseo_1.pd