918 research outputs found
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
An opportunistic indoors positioning scheme based on estimated positions
The localization requirements for mobile nodes in wireless (sensor) networks are increasing. However, most research works are based on range measurements between nodes which are often oversensitive to the measurement error. In this paper we propose a location estimation scheme based on moving nodes that opportunistically exchange known positions. The user couples a linear matrix inequality (LMI) method with a barycenter computation to estimate its position. Simulations have shown that the accuracy of the estimation increases when the number of known positions increases, the radio range decreases and the node speeds increase. The proposed method only depends on a maximum RSS threshold to take into account a known position, which makes it robust and easy to implement. To obtain an accuracy of 1 meter, a user may have to wait at the same position for 5 minutes, with 8 pedestrians moving within range on average
Doctor of Philosophy
dissertationWe are seeing an extensive proliferation of wireless devices including various types and forms of sensor nodes that are increasingly becoming ingrained in our daily lives. There has been a significant growth in wireless devices capabilities as well. This proliferation and rapid growth of wireless devices and their capabilities has led to the development of many distributed sensing and computing applications. In this dissertation, we propose and evaluate novel, efficient approaches for localization and computation offloading that harness distributed sensing and computing in wireless networks. In a significant part of this dissertation, we exploit distributed sensing to create efficient localization applications. First, using the sensing power of a set of Radio frequency (RF) sensors, we propose energy efficient approaches for target tracking application. Second, leveraging the sensing power of a distributed set of existing wireless devices, e.g., smartphones, internet-of-things devices, laptops, and modems, etc., we propose a novel approach to locate spectrum offenders. Third, we build efficient sampling approaches to select mobile sensing devices required for spectrum offenders localization. We also enhance our sampling approaches to take into account selfish behaviors of mobile devices. Finally, we investigate an attack on location privacy where the location of people moving inside a private area can be inferred using the radio characteristics of wireless links that are leaked by legitimate transmitters deployed inside the private area, and develop the first solution to mitigate this attack. While we focus on harnessing distributed sensing for localization in a big part of this dissertation, in the remaining part of this dissertation, we harness the computing power of nearby wireless devices for a computation offloading application. Specially, we propose a multidimensional auction for allocating the tasks of a job among nearby mobile devices based on their computational capabilities and also the cost of computation at these devices with the goal of reducing the overall job completion time and being beneficial to all the parties involved
Doctor of Philosophy
dissertationThis work seeks to improve upon existing methods for device-free localization (DFL) using radio frequency (RF) sensor networks. Device-free localization is the process of determining the location of a target object, typically a person, without the need for a device to be with the object to aid in localization. An RF sensor network measures changes to radio propagation caused by the presence of a person to locate that person. We show how existing methods which use either wideband or narrowband RF channels can be improved in ways including localization accuracy, energy efficiency, and system cost. We also show how wideband and narrowband systems can combine their information to improve localization. A common assumption in ultra-wideband research is that to estimate the bistatic delay or range, "background subtraction" is effective at removing clutter and must first be performed. Another assumption commonly made is that after background subtraction, each individual multipath component caused by a person's presence can be distinguished perfectly. We show that these assumptions are often not true and that ranging can still be performed even when these assumptions are not true. We propose modeling the difference between a current set of channel impulse responses (CIR) and a set of calibration CIRs as a hidden Markov model (HMM) and show the effectiveness of this model over background subtraction. The methods for performing device-free localization by using ultra-wideband (UWB) measurements and by using received signal strength (RSS) measurements are often considered separate topic of research and viewed only in isolation by two different communities of researchers. We consider both of these methods together and propose methods for combining the information obtained from UWB and RSS measurements. We show that using both methods in conjunction is more effective than either method on its own, especially in a setting where radio placement is constrained. It has been shown that for RSS-based DFL, measuring on multiple channels improves localization accuracy. We consider the trade-o s of measuring all radio links on all channels and the energy and latency expense of making the additional measurements required when sampling multiple channels. We also show the benefits of allowing multiple radios to transmit simultaneously, or in parallel, to better measure the available radio links
Development of a Model and Localization Algorithm for Received Signal Strength-Based Geolocation
Location-Based Services (LBS), also called geolocation, have become increasingly popular in the past decades. They have several uses ranging from assisting emergency personnel, military reconnaissance and applications in social media. In geolocation a group of sensors estimate the location of transmitters using position and Radio Frequency (RF) information. A review of the literature revealed that a majority of the Received Signal Strength (RSS) techniques used made erroneous assumptions about the distribution or ignored effects of multiple transmitters, noise and multiple antennas. Further, the corresponding algorithms are often mathematically complex and computationally expensive. To address the issues this dissertation focused on RSS models which account for external factors effects and algorithms that are more efficient and accurate
Sistemas de posicionamento baseados em comunicação por luz para ambientes interiores
The demand for highly precise indoor positioning systems (IPSs) is growing
rapidly due to its potential in the increasingly popular techniques of the
Internet of Things, smart mobile devices, and artificial intelligence. IPS
becomes a promising research domain that is getting wide attention due to its
benefits in several working scenarios, such as, industries, indoor public
locations, and autonomous navigation. Moreover, IPS has a prominent
contribution in day-to-day activities in organizations such as health care
centers, airports, shopping malls, manufacturing, underground locations, etc.,
for safe operating environments. In indoor environments, both radio frequency
(RF) and optical wireless communication (OWC) based technologies could be
adopted for localization. Although the RF-based global positioning system,
such as, Global positioning system offers higher penetration rates with
reduced accuracy (i.e., in the range of a few meters), it does not work well in
indoor environments (and not at all in certain cases such as tunnels, mines,
etc.) due to the very weak signal and no direct access to the satellites. On the
other hand, the light-based system known as a visible light positioning (VLP)
system, as part of the OWC systems, uses the pre-existing light-emitting
diodes (LEDs)-based lighting infrastructure, could be used at low cost and
high accuracy compared with the RF-based systems. VLP is an emerging
technology promising high accuracy, high security, low deployment cost,
shorter time response, and low relative complexity when compared with RFbased
positioning.
However, in indoor VLP systems, there are some concerns such as,
multipath reflection, transmitter tilting, transmitter’s position, and orientation
uncertainty, human shadowing/blocking, and noise causing the increase in
the positioning error, thereby reducing the positioning accuracy of the system.
Therefore, it is imperative to capture the characteristics of different VLP
channel and properly model them for the dual purpose of illumination and
localization. In this thesis, firstly, the impact of transmitter tilting angles and
multipath reflections are studied and for the first time, it is demonstrated that
tilting the transmitter can be beneficial in VLP systems considering both line of
sight (LOS) and non-line of sight transmission paths. With the transmitters
oriented towards the center of the receiving plane, the received power level is
maximized due to the LOS components. It is also shown that the proposed
scheme offers a significant accuracy improvement of up to ~66% compared
with a typical non-tilted transmitter VLP. The effect of tilting the transmitter on
the lighting uniformity is also investigated and results proved that the
uniformity achieved complies with the European Standard EN 12464-1.
After that, the impact of transmitter position and orientation uncertainty on
the accuracy of the VLP system based on the received signal strength (RSS)
is investigated. Simulation results show that the transmitter uncertainties have
a severe impact on the positioning error, which can be leveraged through the
usage of more transmitters. Concerning a smaller transmitter’s position
epochs, and the size of the training set. It is shown that,
the ANN with Bayesian regularization outperforms the traditional RSS
technique using the non-linear least square estimation for all values of signal
to noise ratio.
Furthermore, a novel indoor VLP system is proposed based on support
vector machines and polynomial regression considering two different
multipath environments of an empty room and a furnished room. The results
show that, in an empty room, the positioning accuracy improvement for the
positioning error of 2.5 cm are 36.1, 58.3, and 72.2 % for three different
scenarios according to the regions’ distribution in the room. For the furnished
room, a positioning relative accuracy improvement of 214, 170, and 100 % is
observed for positioning error of 0.1, 0.2, and 0.3 m, respectively. Ultimately,
an indoor VLP system based on convolutional neural networks (CNN) is
proposed and demonstrated experimentally in which LEDs are used as
transmitters and a rolling shutter camera is used as receiver. A detection
algorithm named single shot detector (SSD) is used which relies on CNN (i.e.,
MobileNet or ResNet) for classification as well as position estimation of each
LED in the image. The system is validated using a real-world size test setup
containing eight LED luminaries. The obtained results show that the maximum
average root mean square positioning error achieved is 4.67 and 5.27 cm with
SSD MobileNet and SSD ResNet models, respectively. The validation results
show that the system can process 67 images per second, allowing real-time
positioning.A procura por sistemas de posicionamento interior (IPSs) de alta precisão tem
crescido rapidamente devido ao seu interesse nas técnicas cada vez mais
populares da Internet das Coisas, dispositivos móveis inteligentes e
inteligência artificial. O IPS tornou-se um domínio de pesquisa promissor que
tem atraído grande atenção devido aos seus benefícios em vários cenários de
trabalho, como indústrias, locais públicos e navegação autónoma. Além disso,
o IPS tem uma contribuição destacada no dia a dia de organizações, como,
centros de saúde, aeroportos, supermercados, fábricas, locais subterrâneos,
etc. As tecnologias baseadas em radiofrequência (RF) e comunicação óptica
sem fio (OWC) podem ser adotadas para localização em ambientes interiores.
Embora o sistema de posicionamento global (GPS) baseado em RF ofereça
taxas de penetração mais altas com precisão reduzida (ou seja, na faixa de
alguns metros), não funciona bem em ambientes interiores (e não funciona
bem em certos casos como túneis, minas, etc.) devido ao sinal muito fraco e
falta de acesso direto aos satélites. Por outro lado, o sistema baseado em luz
conhecido como sistema de posicionamento de luz visível (VLP), como parte
dos sistemas OWC, usa a infraestrutura de iluminação baseada em díodos
emissores de luz (LEDs) pré-existentes, é um sistemas de baixo custo e alta
precisão quando comprado com os sistemas baseados em RF. O VLP é uma
tecnologia emergente que promete alta precisão, alta segurança, baixo custo
de implantação, menor tempo de resposta e baixa complexidade relativa
quando comparado ao posicionamento baseado em RF.
No entanto, os sistemas VLP interiores, exibem algumas limitações, como, a
reflexão multicaminho, inclinação do transmissor, posição do transmissor e
incerteza de orientação, sombra/bloqueio humano e ruído, que têm como
consequência o aumento do erro de posicionamento, e consequente redução
da precisão do sistema. Portanto, é imperativo estudar as características dos
diferentes canais VLP e modelá-los adequadamente para o duplo propósito de
iluminação e localização. Esta tesa aborda, primeiramente, o impacto dos
ângulos de inclinação do transmissor e reflexões multipercurso no
desempenho do sistema de posicionamento. Demonstra-se que a inclinação
do transmissor pode ser benéfica em sistemas VLP considerando tanto a linha
de vista (LOS) como as reflexões. Com os transmissores orientados para o
centro do plano recetor, o nível de potência recebido é maximizado devido aos
componentes LOS. Também é mostrado que o esquema proposto oferece
uma melhoria significativa de precisão de até ~66% em comparação com um
sistema VLP de transmissor não inclinado típico. O efeito da inclinação do
transmissor na uniformidade da iluminação também é investigado e os
resultados comprovam que a uniformidade alcançada está de acordo com a
Norma Europeia EN 12464-1.
O impacto da posição do transmissor e incerteza de orientação na precisão
do sistema VLP com base na intensidade do sinal recebido (RSS) foi também investigado. Os resultados da simulação mostram que as incertezas do
transmissor têm um impacto severo no erro de posicionamento, que pode ser
atenuado com o uso de mais transmissores. Para incertezas de
posicionamento dos transmissores menores que 5 cm, os erros médios de
posicionamento são 23.3, 15.1 e 13.2 cm para conjuntos de 4, 9 e 16
transmissores, respetivamente. Enquanto que, para a incerteza de orientação
de um transmissor menor de 5°, os erros médios de posicionamento são 31.9,
20.6 e 17 cm para conjuntos de 4, 9 e 16 transmissores, respetivamente.
O trabalho da tese abordou a investigação dos aspetos de projeto de um
sistema VLP indoor no qual uma rede neuronal artificial (ANN) é utilizada para
estimativa de posicionamento considerando um canal multipercurso. O estudo
considerou a influência do ruído como indicador de desempenho para a
comparação entre diferentes abordagens de projeto. Três algoritmos de treino
de ANNs diferentes foram considerados, a saber, Levenberg-Marquardt,
regularização Bayesiana e algoritmos de gradiente conjugado escalonado,
para minimizar o erro de posicionamento no sistema VLP. O projeto da ANN foi
otimizado com base no número de neurónios nas camadas ocultas, no número
de épocas de treino e no tamanho do conjunto de treino. Mostrou-se que, a
ANN com regularização Bayesiana superou a técnica RSS tradicional usando
a estimação não linear dos mínimos quadrados para todos os valores da
relação sinal-ruído.
Foi proposto um novo sistema VLP indoor baseado em máquinas de vetores
de suporte (SVM) e regressão polinomial considerando dois ambientes
interiores diferentes: uma sala vazia e uma sala mobiliada. Os resultados
mostraram que, numa sala vazia, a melhoria da precisão de posicionamento
para o erro de posicionamento de 2.5 cm são 36.1, 58.3 e 72.2% para três
cenários diferentes de acordo com a distribuição das regiões na sala. Para a
sala mobiliada, uma melhoria de precisão relativa de posicionamento de 214,
170 e 100% é observada para erro de posicionamento de 0.1, 0.2 e 0.3 m,
respetivamente.
Finalmente, foi proposto um sistema VLP indoor baseado em redes neurais
convolucionais (CNN). O sistema foi demonstrado experimentalmente usando
luminárias LED como transmissores e uma camara com obturador rotativo
como recetor. O algoritmo de detecção usou um detector de disparo único
(SSD) baseado numa CNN pré configurada (ou seja, MobileNet ou ResNet)
para classificação. O sistema foi validado usando uma configuração de teste
de tamanho real contendo oito luminárias LED. Os resultados obtidos
mostraram que o erro de posicionamento quadrático médio alcançado é de
4.67 e 5.27 cm com os modelos SSD MobileNet e SSD ResNet,
respetivamente. Os resultados da validação mostram que o sistema pode
processar 67 imagens por segundo, permitindo o posicionamento em tempo
real.Programa Doutoral em Engenharia Eletrotécnic
Observability of Path Loss Parameters in WLAN-Based Simultaneous Localization and Mapping
Indoor positioning by means of received signal strengths has been gathering much interest since the massive presence of wireless local area networks (WLANs) in buildings. Theoretical approaches rely on the perfect knowledge of the APs' positions and propagation conditions; since this is unrealistic in real world, we estimate such knowledge as well as the building map from data by applying Simultaneous Localization and Mapping (SLAM).
In this paper we address the joint estimation of the path loss parameters, namely the transmitted power and the path loss exponent, this latter being usually approximated in the literature by the free space value. We provide examples that show the relevance of estimating both parameters and analyze observability issues from the point of view of estimation theory. The integration of the parameter estimation in a WLAN based SLAM algorithm - WiSLAM - has been carried out and the results are discussed
- …