Joint Wireless Information and Power Transfer for an Autonomous Multiple Antenna Relay System

Considering a three-node multiple antenna relay system, this paper proposes a two-phase amplify-and-forward (AF) relaying protocol, which enables the autonomous relay to simultaneously harvest wireless power from the source information signal and from an energy signal conveyed by the destination. We first study this energy-flow-assisted (EFA) relaying in a single-input single-output (SISO) relay system and aim at maximizing the rate. By transforming the optimization problem into an equivalent convex form, a global optimum can be found. We then extend the protocol to a multiple antenna relay system. The relay processing matrix is optimized to maximize the rate. The optimization problem can be efficiently solved by eigenvalue decomposition, after linear algebra manipulation. It is observed that the benefits of the energy flow are interestingly shown only in the multiple antenna case, and it is revealed that the received information signal and the energy leakage at the relay can be nearly separated by making use of the signal space, such that the desired signal can be amplified with a larger coefficient.Comment: Accepted to IEEE Communications Letter

Relaying Strategies for Wireless-Powered MIMO Relay Networks

This paper investigates relaying schemes in an amplify-and-forward multiple-input multiple-output relay network, where an energy-constrained relay harvests wireless power from the source information flow and can be further aided by an energy flow (EF) in the form of a wireless power transfer at the destination. However, the joint optimization of the relay matrix and the source precoder for the energy-flow-assisted (EFA) and the non-EFA (NEFA) schemes is intractable. The original rate maximization problem is transformed into an equivalent weighted mean square error minimization problem and optimized iteratively, where the global optimum of the nonconvex source precoder subproblem is achieved by semidefinite relaxation and rank reduction. The iterative algorithm finally converges. Then, the simplified EFA and NEFA schemes are proposed based on channel diagonalization, such that the matrices optimizations can be simplified to power optimizations. Closed-form solutions can be achieved. Simulation results reveal that the EFA schemes can outperform the NEFA schemes. Additionally, deploying more antennas at the relay increases the dimension of the signal space at the relay. Exploiting the additional dimension, the EF leakage in the information detecting block can be nearly separated from the information signal, such that the EF leakage can be amplified with a small coefficient.Comment: Submitted for possible journal publicatio

Fundamentals of Wireless Information and Power Transfer: From RF Energy Harvester Models to Signal and System Designs

Radio waves carry both energy and information simultaneously. Nevertheless, Radio-Frequency (RF) transmission of these quantities have traditionally been treated separately. Currently, we are experiencing a paradigm shift in wireless network design, namely unifying wireless transmission of information and power so as to make the best use of the RF spectrum and radiations as well as the network infrastructure for the dual purpose of communicating and energizing. In this paper, we review and discuss recent progress on laying the foundations of the envisioned dual purpose networks by establishing a signal theory and design for Wireless Information and Power Transmission (WIPT) and identifying the fundamental tradeoff between conveying information and power wirelessly. We start with an overview of WIPT challenges and technologies, namely Simultaneous Wireless Information and Power Transfer (SWIPT),Wirelessly Powered Communication Network (WPCN), and Wirelessly Powered Backscatter Communication (WPBC). We then characterize energy harvesters and show how WIPT signal and system designs crucially revolve around the underlying energy harvester model. To that end, we highlight three different energy harvester models, namely one linear model and two nonlinear models, and show how WIPT designs differ for each of them in single-user and multi-user deployments. Topics discussed include rate-energy region characterization, transmitter and receiver architecture, waveform design, modulation, beamforming and input distribution optimizations, resource allocation, and RF spectrum use. We discuss and check the validity of the different energy harvester models and the resulting signal theory and design based on circuit simulations, prototyping and experimentation. We also point out numerous directions that are promising for future research.Comment: guest editor-authored tutorial paper submitted to IEEE JSAC special issue on wireless transmission of information and powe