Joint Source-Relay Design for Full-Duplex MIMO AF Relay Systems

The performance of full-duplex (FD) relay systems can be greatly impacted by the self-interference (SI) at relays. By exploiting multiple antennas, the spectral efficiency of FD relay systems can be enhanced through spatial SI mitigation. This paper studies joint source transmit beamforming and relay processing to achieve rate maximization for FD multiple-input-multiple-output (MIMO) amplify-and-forward (AF) relay systems with consideration of relay processing delay. The problem is difficult to solve mainly due to the SI constraint induced by the relay processing delay. In this paper, we first present a sufficient condition under which the relay amplification matrix has rank-one structure. Then, for the case of rank-one amplification matrix, the rate maximization problem is equivalently simplified into an unconstrained problem that can be locally solved using the gradient ascent method. Next, we propose a penalty-based algorithmic framework, named P-BSUM, for a class of constrained optimization problems that have difficult equality constraints in addition to some convex constraints. By rewriting the rate maximization problem with a set of auxiliary variables, we apply the P-BSUM algorithm to the rate maximization problem in the general case. Finally, numerical results validate the efficiency of the proposed algorithms and show that the joint source-relay design approach under the rankone assumption could be strictly suboptimal as compared to the P-BSUM-based joint source-relay design approach

Hardware Impairments Aware Transceiver Design for Full-Duplex Amplify-and-Forward MIMO Relaying

In this work we study the behavior of a full-duplex (FD) and amplify-and-forward (AF) relay with multiple antennas, where hardware impairments of the FD relay transceiver is taken into account. Due to the inter-dependency of the transmit relay power on each antenna and the residual self-interference in an FD-AF relay, we observe a distortion loop that degrades the system performance when the relay dynamic range is not high. In this regard, we analyze the relay function in presence of the hardware inaccuracies and an optimization problem is formulated to maximize the signal to distortion-plus-noise ratio (SDNR), under relay and source transmit power constraints. Due to the problem complexity, we propose a gradient-projection-based (GP) algorithm to obtain an optimal solution. Moreover, a nonalternating sub-optimal solution is proposed by assuming a rank-1 relay amplification matrix, and separating the design of the relay process into multiple stages (MuStR1). The proposed MuStR1 method is then enhanced by introducing an alternating update over the optimization variables, denoted as AltMuStR1 algorithm. It is observed that compared to GP, (Alt)MuStR1 algorithms significantly reduce the required computational complexity at the expense of a slight performance degradation. Finally, the proposed methods are evaluated under various system conditions, and compared with the methods available in the current literature. In particular, it is observed that as the hardware impairments increase, or for a system with a high transmit power, the impact of applying a distortion-aware design is significant.Comment: Submitted to IEEE Transactions on Wireless Communication

Joint Source and Relay Precoding Designs for MIMO Two-Way Relaying Based on MSE Criterion

Properly designed precoders can significantly improve the spectral efficiency of multiple-input multiple-output (MIMO) relay systems. In this paper, we investigate joint source and relay precoding design based on the mean-square-error (MSE) criterion in MIMO two-way relay systems, where two multi-antenna source nodes exchange information via a multi-antenna amplify-and-forward relay node. This problem is non-convex and its optimal solution remains unsolved. Aiming to find an efficient way to solve the problem, we first decouple the primal problem into three tractable sub-problems, and then propose an iterative precoding design algorithm based on alternating optimization. The solution to each sub-problem is optimal and unique, thus the convergence of the iterative algorithm is guaranteed. Secondly, we propose a structured precoding design to lower the computational complexity. The proposed precoding structure is able to parallelize the channels in the multiple access (MAC) phase and broadcast (BC) phase. It thus reduces the precoding design to a simple power allocation problem. Lastly, for the special case where only a single data stream is transmitted from each source node, we present a source-antenna-selection (SAS) based precoding design algorithm. This algorithm selects only one antenna for transmission from each source and thus requires lower signalling overhead. Comprehensive simulation is conducted to evaluate the effectiveness of all the proposed precoding designs.Comment: 32 pages, 10 figure

Secure Full-Duplex Two-Way Relaying for SWIPT

This letter studies bi-directional secure information exchange in a simultaneous wireless information and power transfer (SWIPT) system enabled by a full-duplex (FD) multiple-input multiple-output (MIMO) amplify-and-forward (AF) relay. The AF relay injects artificial noise (AN) in order to confuse the eavesdropper. Specifically, we assume a zeroforcing (ZF) solution constraint to eliminate the residual self-interference (RSI). As a consequence, we address the optimal joint design of the ZF matrix and the AN covariance matrix at the relay node as well as the transmit power at the sources. We propose an alternating algorithm utilizing semi-definite programming (SDP) technique and one-dimensional searching to achieve the optimal solution. Simulation results are provided to demonstrate the effectiveness of the proposed algorithm.Comment: Submitted to IEEE Wireless Communications Letter