178 research outputs found

    Power Beacon’s deployment optimization for wirelessly powering massive Internet of Things networks

    Get PDF
    Abstract. The fifth-generation (5G) and beyond wireless cellular networks promise the native support to, among other use cases, the so-called Internet of Things (IoT). Different from human-based cellular services, IoT networks implement a novel vision where ordinary machines possess the ability to autonomously sense, actuate, compute, and communicate throughout the Internet. However, as the number of connected devices grows larger, an urgent demand for energy-efficient communication technologies arises. A key challenge related to IoT devices is that their very small form factor allows them to carry just a tiny battery that might not be even possible to replace due to installation conditions, or too costly in terms of maintenance because of the massiveness of the network. This issue limits the lifetime of the network and compromises its reliability. Wireless energy transfer (WET) has emerged as a potential candidate to replenish sensors’ batteries or to sustain the operation of battery-free devices, as it provides a controllable source of energy over-the-air. Therefore, WET eliminates the need for regular maintenance, allows sensors’ form factor reduction, and reduces the battery disposal that contributes to the environment pollution. In this thesis, we review some WET-enabled scenarios and state-of-the-art techniques for implementing WET in IoT networks. In particular, we focus our attention on the deployment optimization of the so-called power beacons (PBs), which are the energy transmitters for charging a massive IoT deployment subject to a network-wide probabilistic energy outage constraint. We assume that IoT sensors’ positions are unknown at the PBs, and hence we maximize the average incident power on the worst network location. We propose a linear-time complexity algorithm for optimizing the PBs’ positions that outperforms benchmark methods in terms of minimum average incident power and computation time. Then, we also present some insights on the maximum coverage area under certain propagation conditions

    Wireless Network Design and Optimization: From Social Awareness to Security

    Get PDF
    abstract: A principal goal of this dissertation is to study wireless network design and optimization with the focus on two perspectives: 1) socially-aware mobile networking and computing; 2) security and privacy in wireless networking. Under this common theme, this dissertation can be broadly organized into three parts. The first part studies socially-aware mobile networking and computing. First, it studies random access control and power control under a social group utility maximization (SGUM) framework. The socially-aware Nash equilibria (SNEs) are derived and analyzed. Then, it studies mobile crowdsensing under an incentive mechanism that exploits social trust assisted reciprocity (STAR). The efficacy of the STAR mechanism is thoroughly investigated. Next, it studies mobile users' data usage behaviors under the impact of social services and the wireless operator's pricing. Based on a two-stage Stackelberg game formulation, the user demand equilibrium (UDE) is analyzed in Stage II and the optimal pricing strategy is developed in Stage I. Last, it studies opportunistic cooperative networking under an optimal stopping framework with two-level decision-making. For both cases with or without dedicated relays, the optimal relaying strategies are derived and analyzed. The second part studies radar sensor network coverage for physical security. First, it studies placement of bistatic radar (BR) sensor networks for barrier coverage. The optimality of line-based placement is analyzed, and the optimal placement of BRs on a line segment is characterized. Then, it studies the coverage of radar sensor networks that exploits the Doppler effect. Based on a Doppler coverage model, an efficient method is devised to characterize Doppler-covered regions and an algorithm is developed to find the minimum radar density required for Doppler coverage. The third part studies cyber security and privacy in socially-aware networking and computing. First, it studies random access control, cooperative jamming, and spectrum access under an extended SGUM framework that incorporates negative social ties. The SNEs are derived and analyzed. Then, it studies pseudonym change for personalized location privacy under the SGUM framework. The SNEs are analyzed and an efficient algorithm is developed to find an SNE with desirable properties.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

    Workshop sensing a changing world : proceedings workshop November 19-21, 2008

    Get PDF

    6G Enabled Smart Infrastructure for Sustainable Society: Opportunities, Challenges, and Research Roadmap

    Get PDF
    The 5G wireless communication network is currently faced with the challenge of limited data speed exacerbated by the proliferation of billions of data-intensive applications. To address this problem, researchers are developing cutting-edge technologies for the envisioned 6G wireless communication standards to satisfy the escalating wireless services demands. Though some of the candidate technologies in the 5G standards will apply to 6G wireless networks, key disruptive technologies that will guarantee the desired quality of physical experience to achieve ubiquitous wireless connectivity are expected in 6G. This article first provides a foundational background on the evolution of different wireless communication standards to have a proper insight into the vision and requirements of 6G. Second, we provide a panoramic view of the enabling technologies proposed to facilitate 6G and introduce emerging 6G applications such as multi-sensory–extended reality, digital replica, and more. Next, the technology-driven challenges, social, psychological, health and commercialization issues posed to actualizing 6G, and the probable solutions to tackle these challenges are discussed extensively. Additionally, we present new use cases of the 6G technology in agriculture, education, media and entertainment, logistics and transportation, and tourism. Furthermore, we discuss the multi-faceted communication capabilities of 6G that will contribute significantly to global sustainability and how 6G will bring about a dramatic change in the business arena. Finally, we highlight the research trends, open research issues, and key take-away lessons for future research exploration in 6G wireless communicatio

    Dynamic operation, efficient calibration, and advanced data analysis of gas sensors : from modelling to real-world operation

    Get PDF
    This thesis demonstrates the use of dynamic operation, efficient calibration and advanced data analysis using metal oxide semiconductor (MOS) gas sensors as an example – from modeling to real-world operation. The necessary steps for an applicationspecific, selective indoor volatile organic compound (VOC) measurement system are addressed, analyzed and improved. Factors such as sensors, operation, electronics and calibration are considered. The developed methods and tools are universally transferable to other gas sensors and applications. The basis for selective measurement is temperature cyclic operation (TCO). The model-based understanding of a semiconductor gas sensor in TCO for the optimized development of operating modes and data evaluation is addressed and, for example, the tailored and stable detection of short gas pulses is developed. Two successful interlaboratory tests for the measurement of VOCs in independent laboratories are described. Selective measurements of VOCs in the laboratory and in the field are successfully demonstrated. Calibrations using the proposed techniques of randomized design of experiment (DoE), model-based data evaluation and calibration with machine learning methods are employed. The calibrated models are compared with analytical measurements using release tests. The high agreement of the results is unique in current research.Diese Thesis zeigt den Einsatz von dynamischem Betrieb, effizienter Kalibrierung, und fortschrittlicher Datenanalyse am Beispiel von Metalloxid Halbleiter (MOS) Gassensoren – von der Modellierung bis zum realen Betrieb. Die notwendigen Schritte für ein anwendungsspezifisches, selektives Messystem für flüchtige organische Verbindungen (VOC) im Innenraum werden adressiert, analysiert und verbessert. Faktoren wie z.B. Sensoren, Funktionsweise, Elektronik und Kalibrierung werden berücksichtigt. Die entwickelten Methoden und Tools sind universell auf andere Gassensoren und Anwendungen übertragbar. Grundlage für die selektive Messung ist der temperaturzyklische Betrieb (TCO). Auf das modellbasierte Verständnis eines Halbleitergassensors im TCO für die optimierte Entwicklung von Betriebsmodi und Datenauswertung wird eingegangen und z.B. die maßgeschneiderte und stabile Detektion von kurzen Gaspulsen entwickelt. Zwei erfolgreiche Ringversuche zur Messung von VOCs in unabhängigen Laboren werden beschrieben. Selektive Messungen verschiedener VOCs im Labor und im Feld werden erfolgreich demonstriert. Dabei kommen Kalibrierungen mit den vorgeschlagenen Techniken des randomisierten Design of Experiment (DoE), der modellbasierten Datenauswertung und Kalibrierung mit Methoden des maschinellen Lernens zum Einsatz. Die kalibrierten Modelle werden anhand von Freisetzungstests mit analytischen Messungen verglichen. Die hohe Übereinstimmung der Ergebnisse ist einzigartig in der aktuellen Forschung

    Review: Far-infrared instrumentation and technological development for the next decade

    Get PDF
    This work is licensed under a Creative Commons Attribution 4.0 Unported License.Far-infrared astronomy has advanced rapidly since its inception in the late 1950s, driven by a maturing technology base and an expanding community of researchers. This advancement has shown that observations at far-infrared wavelengths are important in nearly all areas of astrophysics, from the search for habitable planets and the origin of life to the earliest stages of galaxy assembly in the first few hundred million years of cosmic history. The combination of a still-developing portfolio of technologies, particularly in the field of detectors, and a widening ensemble of platforms within which these technologies can be deployed, means that far-infrared astronomy holds the potential for paradigm-shifting advances over the next decade. We examine the current and future far-infrared observing platforms, including ground-based, suborbital, and space-based facilities, and discuss the technology development pathways that will enable and enhance these platforms to best address the challenges facing far-infrared astronomy in the 21st century

    The Multispectral Imaging Science Working Group. Volume 3: Appendices

    Get PDF
    The status and technology requirements for using multispectral sensor imagery in geographic, hydrologic, and geologic applications are examined. Critical issues in image and information science are identified

    Intelligent Sensor Networks

    Get PDF
    In the last decade, wireless or wired sensor networks have attracted much attention. However, most designs target general sensor network issues including protocol stack (routing, MAC, etc.) and security issues. This book focuses on the close integration of sensing, networking, and smart signal processing via machine learning. Based on their world-class research, the authors present the fundamentals of intelligent sensor networks. They cover sensing and sampling, distributed signal processing, and intelligent signal learning. In addition, they present cutting-edge research results from leading experts

    Plasmonics at liquid-liquid interfaces

    Get PDF
    The PhD has studied gold nanoparticles (NPs) at the liquid-liquid interface (LLI). Some of the key aspects of the work are listed below. • Centrifugation as a novel and efficient method for adsorbing a controlled number of NPs to the LLI. • Controlled and tuneable 2D interparticle separation at the LLI as evidenced by the plasmon ruler. • Reversible adsorption of 16 nm gold nanoparticles at the water-DCE interface. • Centrifugation as a novel method to form an ultra-concentrated NP aqueous phase. • Controlled and tuneable 3D inter-particle separation in water by ultra-concentration. • The ultra-concentrated NP solution has some ‘record-breaking’ physical properties – e.g. densities in excess of 4.5 gcm-3; optical densities in excess of 70,000; and active surface areas of in excess of 70 m2/mL. • Ultra-concentration is also demonstrated as an efficient purification and NP size-separation technique with efficiencies in excess of 99.9% and 99.5%, respectively. • Close-packed NPs at the LLI are also demonstrated to be an efficient sensing platform through surface enhanced Raman spectroscopy. • The platform benefits from: fmole detection limits; extremely facile, quick and cheap assembly; applicability to a wide range of target analytes; both hydrophilic and hydrophobic detection capabilities simultaneously. • Through evaporation of the organic phase, the platform is also demonstrated to be able to identify and estimate concentrations of airborne analytes. • Finally, 1,8-diaminonaphthalene and its analogues are demonstrated to be extremely efficient mercury reporters when combined with SERS at the LLI. • A dramatic increase in SERS intensity is observed in the presence of mercury – though the exact reason for such an increase is still under investigation, some potential mechanisms are provided. • As with other analytes, NPs at the liquid-air interface demonstrate airborne mercury detection capabilities and this is demonstrated for the first time using SERS.Open Acces
    • …
    corecore