Thermodynamic calculations on the catalytic growth of multiwall carbon nanotubes

We have developed a thermodynamic model of the catalytic growth of multiwall carbon nanotubes from hydrocarbon precursors at elevated temperature. Using this model we have computed the heat distribution, and carbon concentration in the catalyst. Calculations delivered a analytical formula for the growth time and growth rate. We find that the growth is mainly driven by a concentration gradient within the catalyst, rather than a temperature gradient.Comment: 9 pages, 3 figures, 1 tabl

Synthesis of large-area and aligned copper oxide nanowires from copper thin film on silicon substrate

Large-area and aligned copper oxide nanowires have been synthesized by thermal annealing of copper thin films deposited onto silicon substrate. The effects of the film deposition method, annealing temperature, film thickness, annealing gas, and patterning by photolithography are systematically investigated. Long and aligned nanowires can only be formed within a narrow temperature range from 400 to 500°C. Electroplated copper film is favourable for the nanowire growth, compared to that deposited by thermal evaporation. Annealing copper thin film in static air produces large-area, uniform, but not well vertically aligned nanowires along the thin film surface. Annealing copper thin film under a N2/O2 gas flow generates vertically aligned, but not very uniform nanowires on large areas. Patterning copper thin film by photolithography helps to synthesize large-area, uniform, and vertically aligned nanowires along the film surface. The copper thin film is converted into bicrystal CuO nanowires, Cu2O film, and also perhaps some CuO film after the thermal treatment in static air. Only CuO in the form of bicrystal nanowires and thin film is observed after the copper thin film is annealed under a N2/O2 gas flow

Structural and electronic properties of MgO nanotube clusters

Finite magnesium oxide nanotubes are investigated. Stacks of four parallel squares, hexagons, octagons, and decagons are constructed and studied by the pseudopotential density functional theory within the local-density approximation. Optimized structures are slightly distorted stacks of polygons. These clusters are insulators and the band gap of 8.5 eV is constant over an investigated range of the diameters of stacked polygonal rings. Using the L"owdin population analysis a charge transfer towards the oxygen atoms is estimated as 1.4, which indicates that the mixed ionocovalent bonding exists in investigated MgO nanotubes

Photoemission electron microscopy of three-dimensional magnetization configurations in core-shell nanostructures

5 páginas, 4 figuras.-- PACS number(s): 75.75.−c, 68.37.Yz, 81.07.−b.-- et al.We present a photoemission electron microscopy method that combines magnetic imaging of the surface and of the inner magnetization in three-dimensional core-shell nanostructures. The structure investigated consists of a cylindrical nickel core that is completely surrounded by a shell of iron oxide and silicon oxide layers. The method enables one to image the magnetization configuration of the nickel core even though the shell is thicker than the mean-free path of the photoelectrons. Characteristic L3 and L2 edges can be observed not only in the yield of the photoelectrons emitted from the surface of the nanostructure but also in its shadow. X-ray magnetic circular dichroism in the electron yield of the x rays absorbed and transmitted by the multilayered nanowire allows for the individual imaging of the magnetization configurations of the iron oxide tube and the nickel core. The method suggests novel approaches for the characterization of the magnetic and material properties of complex three-dimensional nanostructures.Financial support by the Deutsche Forschungsgemeinschaft via the Sonderforschungsbereich 668 and the Graduiertenkolleg 1286 as well as by the Forschungs- und Wissenschaftsstiftung Hamburg via the Cluster of Excellence Nanospintronics and by the Helmholtz-Zentrum Berlin is gratefully acknowledged.Peer reviewe

Carbon nanotubes as a 1D template for the synthesis of air sensitive materials: about the confinement effect

Cobalt ferrite and cobalt iron nanowires with an average diameter of 50 nm and lengths up to several micrometers were synthesized inside multi-walled carbon nanotubes (MWNTs) under mild reaction conditions, i.e. 100 °C and atmospheric pressure, using an aqueous nitrate precursor salt filling the tubes. The concept of a confinement effect inside carbon nanotubes has been advanced to explain the formation of CoFe2O4 under such mild reaction conditions. The formation of caps near the tube tips at the beginning of the nitrate decomposition meant that each nanotube was considered as a closed nanoreactor, in which the reaction conditions could be very different to the macroscopic conditions outside the tube. The subsequent reduction of the CoFe2O4 allowed to obtain CoFe nanowires cast in the carbon nanotubes. These nanowires exhibit a high resistance towards oxidation, whereas bulk CoFe is known to undergo oxidation at room temperature and atmospheric pressure. This phenomenon was attributed to oxygen diffusion problems due to the confinement effect of the carbon nanotubes

Comparative study of the catalytic growth of patterned carbon nanotube films

Three different catalysts (Fe, Ni, Co nitrates dissolved in ethanol) were patterned on a SiO2/Si substrate and multi-wall carbon nanotubes were grown by catalytic decomposition of acetylene. We compare the growth of the carbon nanostructures in the temperature range between 580C and 1000C. With our experimental set-up the catalyst solutions of cobalt and nickel were found to be less efficient than the one of iron. An optimal production of multi-wall nanotubes was observed at temperatures between 650C and 720C with the iron solution as catalyst. We found a tendency towards thicker structures with higher temperatures. Finally, we suggest a mechanism for the growth of these carbon structures.Comment: 5 pages, 5 figure