Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

Efficient Spectrum Sensing and Sharing Techniques for Dynamic Wideband Spectrum Access

Besides enabling an enhanced mobile broadband access, fifth-generation (5G) wireless mobile networks are envisioned to support the connectivity of massive, heterogeneous Internet of Things (IoT) devices. Connecting these devices through 5G systems and providing them with their needed data rates require huge amounts of spectrum and power resources, thus calling for the development and design of innovative, dynamic resource identification, access and sharing methods that make effective use of these limited resources. This thesis focuses specifically on wideband spectrum sensing, and presents innovative techniques that enable efficient identification and recovery of unused spectrum opportunities in wideband dynamic spectrum access. Recent research efforts have focused on leveraging compressive sampling (CS) theory to enable wideband spectrum sensing recovery at sub-Nyquist rates. However, these approaches suffer from the following shortcomings. First, they consider homogenous wideband spectrum, where all bands are assumed to have similar primary users (PU)s traffic characteristics whereas in practice, the wideband spectrum occupancy is heterogeneous. Second, the number of measurements that receiver hardware designs are able to perform is practically way smaller than the number of measurements required by the CS-based sensing approaches. Third, the number of measurements required by the CS-based sensing approaches depends on the number of occupied bands (i.e., sparsity level), which is often unknown in advance and changes over time. Forth, current wideband spectrum databases suffer from scalability issues in that they incur lots of sensing overhead. This thesis proposes a set of new, complementary techniques that overcome these aforementioned challenges. More specifically, in this thesis, 1. We design efficient spectrum occupancy information recovery techniques for heterogeneous wideband spectrum access. Our proposed techniques exploit the block-like structure of spectrum occupancy behavior observed in wideband spectrum access networks to enable the development of compressed spectrum sensing algorithms. Our proposed spectrum sensing algorithms achieve more stable spectrum information recovery than that achieved by existing approaches. 2. We develop distributed CS-based spectrum sensing techniques for cooperative wideband spectrum access that require lesser measurements while overcoming time-variability of spectrum occupancy and addressing hidden terminal challenges. Also, we propose non-uniform sensing matrices design that exploits the heterogeneity in the wideband spectrum access to further improve the spectrum sensing recovery accuracy. 3. We develop scalable spectrum occupancy information recovery techniques for database-driven wideband spectrum access networks. The novelty of our developed techniques lies in combining the merit of compressive sampling theory with that of low-rank matrix theory to enable scalable and accurate wideband spectrum occupancy recovery at low sensing overhead. 4. We propose joint data and energy transfer optimization frameworks for powering mobile cellular devices through RF energy harvesting. Our proposed framework accounts for both the consumed power at the base station and the battery power available at the end users to ensure that end users achieve their required data rates with as little battery power consumption as possible. We also analytically derive closed-form expressions of the optimal power allocations required for meeting the data rate requirements of the downlink and uplink communications between the base station and its mobile users

Smart Monitoring and Control in the Future Internet of Things

The Internet of Things (IoT) and related technologies have the promise of realizing pervasive and smart applications which, in turn, have the potential of improving the quality of life of people living in a connected world. According to the IoT vision, all things can cooperate amongst themselves and be managed from anywhere via the Internet, allowing tight integration between the physical and cyber worlds and thus improving efficiency, promoting usability, and opening up new application opportunities. Nowadays, IoT technologies have successfully been exploited in several domains, providing both social and economic benefits. The realization of the full potential of the next generation of the Internet of Things still needs further research efforts concerning, for instance, the identification of new architectures, methodologies, and infrastructures dealing with distributed and decentralized IoT systems; the integration of IoT with cognitive and social capabilities; the enhancement of the sensing–analysis–control cycle; the integration of consciousness and awareness in IoT environments; and the design of new algorithms and techniques for managing IoT big data. This Special Issue is devoted to advancements in technologies, methodologies, and applications for IoT, together with emerging standards and research topics which would lead to realization of the future Internet of Things

Relay assisted device-to-device communication with channel uncertainty

The gains of direct communication between user equipment in a network may not be fully realised due to the separation between the user equipment and due to the fading that the channel between these user equipment experiences. In order to fully realise the gains that direct (device-to-device) communication promises, idle user equipment can be exploited to serve as relays to enforce device-to-device communication. The availability of potential relay user equipment creates a problem: a way to select the relay user equipment. Moreover, unlike infrastructure relays, user equipment are carried around by people and these users are self-interested. Thus the problem of relay selection goes beyond choosing which device to assist in relayed communication but catering for user self-interest. Another problem in wireless communication is the unavailability of perfect channel state information. This reality creates uncertainty in the channel and so in designing selection algorithms, channel uncertainty awareness needs to be a consideration. Therefore the work in this thesis considers the design of relay user equipment selection algorithms that are not only device centric but that are relay user equipment centric. Furthermore, the designed algorithms are channel uncertainty aware. Firstly, a stable matching based relay user equipment selection algorithm is put forward for underlay device-to-device communication. A channel uncertainty aware approach is proposed to cater to imperfect channel state information at the devices. The algorithm is combined with a rate based mode selection algorithm. Next, to cater to the queue state at the relay user equipment, a cross-layer selection algorithm is proposed for a twoway decode and forward relay set up. The algorithm proposed employs deterministic uncertainty constraint in the interference channel, solving the selection algorithm in a heuristic fashion. Then a cluster head selection algorithm is proposed for device-to-device group communication constrained by channel uncertainty in the interference channel. The formulated rate maximization problem is solved for deterministic and probabilistic constraint scenarios, and the problem extended to a multiple-input single-out scenario for which robust beamforming was designed. Finally, relay utility and social distance based selection algorithms are proposed for full duplex decode and forward device-to-device communication set up. A worst-case approach is proposed for a full channel uncertainty scenario. The results from computer simulations indicate that the proposed algorithms offer spectral efficiency, fairness and energy efficiency gains. The results also showed clearly the deterioration in the performance of networks when perfect channel state information is assumed

Distributed scheduling algorithms for LoRa-based wide area cyber-physical systems

Low Power Wide Area Networks (LPWAN) are a class of wireless communication protocols that work over long distances, consume low power and support low datarates. LPWANs have been designed for monitoring applications, with sparse communication from nodes to servers and sparser from servers to nodes. Inspite of their initial design, LPWANs have the potential to target applications with higher and stricter requirements like those of Cyber-Physical Systems (CPS). Due to their long-range capabilities, LPWANs can specifically target CPS applications distributed over a wide-area, which is referred to as Wide-Area CPS (WA-CPS). Augmenting WA-CPSs with wireless communication would allow for more flexible, low-cost and easily maintainable deployment. However, wireless communications come with problems like reduced reliability and unpredictable latencies, making them harder to use for CPSs. With this intention, this thesis explores the use of LPWANs, specifically LoRa, to meet the communication and control requirements of WA-CPSs. The thesis focuses on using LoRa due to its high resilience to noise, several communication parameters to choose from and a freely modifiable communication stack and servers making it ideal for research and deployment. However, LoRaWAN suffers from low reliability due to its ALOHA channel access method. The thesis posits that "Distributed algorithms would increase the protocol's reliability allowing it to meet the requirements of WA-CPSs". Three different application scenarios are explored in this thesis that leverage unexplored aspects of LoRa to meet their requirements. The application scenarios are delay-tolerant vehicular networks, multi-stakeholder WA-CPS deployments and water distribution networks. The systems use novel algorithms to facilitate communication between the nodes and gateways to ensure a highly reliable system. The results outperform state-of-art techniques to prove that LoRa is currently under-utilised and can be used for CPS applications.Open Acces

The Four-C Framework for High Capacity Ultra-Low Latency in 5G Networks: A Review

Network latency will be a critical performance metric for the Fifth Generation (5G) networks expected to be fully rolled out in 2020 through the IMT-2020 project. The multi-user multiple-input multiple-output (MU-MIMO) technology is a key enabler for the 5G massive connectivity criterion, especially from the massive densification perspective. Naturally, it appears that 5G MU-MIMO will face a daunting task to achieve an end-to-end 1 ms ultra-low latency budget if traditional network set-ups criteria are strictly adhered to. Moreover, 5G latency will have added dimensions of scalability and flexibility compared to prior existing deployed technologies. The scalability dimension caters for meeting rapid demand as new applications evolve. While flexibility complements the scalability dimension by investigating novel non-stacked protocol architecture. The goal of this review paper is to deploy ultra-low latency reduction framework for 5G communications considering flexibility and scalability. The Four (4) C framework consisting of cost, complexity, cross-layer and computing is hereby analyzed and discussed. The Four (4) C framework discusses several emerging new technologies of software defined network (SDN), network function virtualization (NFV) and fog networking. This review paper will contribute significantly towards the future implementation of flexible and high capacity ultra-low latency 5G communications

Enhancing Mobility Applications Through Bluetooth Communications

In the world of short and medium-range wireless technologies, Bluetooth has recently come to the forefront of innovation. Within the next five years its market presence, especially in its Low Energy variation, is expected to nearly double across all market segments. The technology is quickly and steadily gaining importance for a wide range of applications with a specific focus on Internet of Things (IoT) devices. The growing availability and variety of such devices constitute an untapped potential that we plan on exploiting. Our focus in this thesis is to understand Bluetooth’s capabilities and explore its potential in mobile contexts. One specific field where this technology remains unexplored is Vehicular Ad Hoc Networks (VANETs). Because of the need to implement and moderate vehicular communications, the topic of Intelligent Transportation Systems (ITSs) is now trending more than ever. In this thesis we propose two ways we can benefit from Bluetooth in a mobile environment. Firstly, we consider the technology as a communication medium to investigate how di↵erent mobilities a↵ect the link performance between two devices. To do this, we define a set of communication experiments, in our case between two vehicles, to analyse how Bluetooth Low Energy (BLE) is a↵ected by varying speed, distance and traffic conditions. We find that the maximum communication range between two devices can go beyond 100m and that a robust connection, capable of handling sudden signal losses or interference, can be achieved up to a distance of 50m. The experiments were conducted using a proof-of-concept mobile application for o↵-the-shelf smartphones that can be used to transmit data over multiple hops in various Vehicle-to-Everything (V2X) scenarios. Secondly, we consider Bluetooth discovery capabilities as an information medium by using a connectionless approach to analyse di↵erent mobility frameworks. As there is an increasing need for vehicles and objects to become aware of their context, we implement Bluetooth as a sensing system to provide contextual information about its surroundings. Our challenge is to find out to what extent we can exploit the Bluetooth discovery and beaconing scheme for this purpose. We collect and analyse a dataset of Bluetooth Classic and BLE discoveries and evaluate their respective characteristics and ability to provide context-aware information from a vehicular perspective. By examining data recorded about encountered devices, such as quantity, quality of signal and device class information, we infer distinctive Bluetooth behaviours related to context and application. For this purpose, we propose a set a features to train a classification model to recognize di↵erent driving environments (i.e. road classes). Investigating the performance of our classifier, we were able to predict up to three classes (highway, city, extra-urban) by using only Bluetooth discovery data and no geographical information. This outcome gives promising results targeted at low energy and privacy-friendly applications and can open up a wide range of research directions. In conclusion, in this thesis we present two ways of applying Bluetooth to mobile contexts for deploying novel human mobility applications

Ecosystemic Evolution Feeded by Smart Systems

Information Society is advancing along a route of ecosystemic evolution. ICT and Internet advancements, together with the progression of the systemic approach for enhancement and application of Smart Systems, are grounding such an evolution. The needed approach is therefore expected to evolve by increasingly fitting into the basic requirements of a significant general enhancement of human and social well-being, within all spheres of life (public, private, professional). This implies enhancing and exploiting the net-living virtual space, to make it a virtuous beneficial integration of the real-life space. Meanwhile, contextual evolution of smart cities is aiming at strongly empowering that ecosystemic approach by enhancing and diffusing net-living benefits over our own lived territory, while also incisively targeting a new stable socio-economic local development, according to social, ecological, and economic sustainability requirements. This territorial focus matches with a new glocal vision, which enables a more effective diffusion of benefits in terms of well-being, thus moderating the current global vision primarily fed by a global-scale market development view. Basic technological advancements have thus to be pursued at the system-level. They include system architecting for virtualization of functions, data integration and sharing, flexible basic service composition, and end-service personalization viability, for the operation and interoperation of smart systems, supporting effective net-living advancements in all application fields. Increasing and basically mandatory importance must also be increasingly reserved for human–technical and social–technical factors, as well as to the associated need of empowering the cross-disciplinary approach for related research and innovation. The prospected eco-systemic impact also implies a social pro-active participation, as well as coping with possible negative effects of net-living in terms of social exclusion and isolation, which require incisive actions for a conformal socio-cultural development. In this concern, speed, continuity, and expected long-term duration of innovation processes, pushed by basic technological advancements, make ecosystemic requirements stricter. This evolution requires also a new approach, targeting development of the needed basic and vocational education for net-living, which is to be considered as an engine for the development of the related ‘new living know-how’, as well as of the conformal ‘new making know-how’

Internet of Things and Sensors Networks in 5G Wireless Communications

The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic