Integral Sliding Mode Control for Markovian Jump T-S Fuzzy Descriptor Systems Based on the Super-Twisting Algorithm

This paper investigates integral sliding mode control problems for Markovian jump T-S fuzzy descriptor systems via the super-twisting algorithm. A new integral sliding surface which is continuous is constructed and an integral sliding mode control scheme based on a variable gain super-twisting algorithm is presented to guarantee the well-posedness of the state trajectories between two consecutive switchings. The stability of the sliding motion is analyzed by considering the descriptor redundancy and the properties of fuzzy membership functions. It is shown that the proposed variable gain super-twisting algorithm is an extension of the classical single-input case to the multi-input case. Finally, a bio-economic system is numerically simulated to verify the merits of the method proposed

Dynamic output feedback sliding mode control for uncertain linear systems

In this paper, a class of uncertain linear systems with unmatched disturbances is considered, where the nominal system representation is allowed to be non-minimum phase. A sliding surface is designed which is dependent on the system output, observed state, and estimated uncertain parameters. A linear coordinate transformation is introduced so that the stability analysis of the reduced-order sliding mode dynamics can be conveniently performed. A robust output feedback sliding mode control (OFSMC) is then designed to drive the considered system state to reach the sliding surface in finite time and maintain a sliding motion thereafter. A simulation example for a high incidence research model (HIRM) aircraft is used to demonstrate the effectiveness of the proposed method

Robust model-based fault estimation and fault-tolerant control : towards an integration

To maintain robustly acceptable system performance, fault estimation (FE) is adopted to reconstruct fault signals and a fault-tolerant control (FTC) controller is employed to compensate for the fault effects. The inevitably existing system and estimation uncertainties result in the so-called bi-directional robustness interactions defined in this work between the FE and FTC functions, which gives rise to an important and challenging yet open integrated FE/FTC design problem concerned in this thesis. An example of fault-tolerant wind turbine pitch control is provided as a practical motivation for integrated FE/FTC design.To achieve the integrated FE/FTC design for linear systems, two strategies are proposed. A H∞ optimization based approach is first proposed for linear systems with differentiable matched faults, using augmented state unknown input observer FE and adaptive sliding mode FTC. The integrated design is converted into an observer-based robust control problem solved via a single-step linear matrix inequality formulation.With the purpose of an integrated design with more freedom and also applicable for a range of general fault scenarios, a decoupling approach is further proposed. This approach can estimate and compensate unmatched non-differentiable faults and perturbations by combined adaptive sliding mode augmented state unknown input observer and backstepping FTC controller. The observer structure renders a recovery of the Separation Principle and allows great freedom for the FE/FTC designs.Integrated FE/FTC design strategies are also developed for Takagi-Sugeno fuzzy modelling nonlinear systems, Lipschitz nonlinear systems, and large-scale interconnected systems, based on extensions of the H∞ optimization approach for linear systems.Tutorial examples are used to illustrate the design strategies for each approach. Physical systems, a 3-DOF (degree-of-freedom) helicopter and a 3-machine power system, are used to provide further evaluation of the proposed integrated FE/FTC strategies. Future research on this subject is also outlined

Analysis, filtering, and control for Takagi-Sugeno fuzzy models in networked systems

Copyright © 2015 Sunjie Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.The fuzzy logic theory has been proven to be effective in dealing with various nonlinear systems and has a great success in industry applications. Among different kinds of models for fuzzy systems, the so-called Takagi-Sugeno (T-S) fuzzy model has been quite popular due to its convenient and simple dynamic structure as well as its capability of approximating any smooth nonlinear function to any specified accuracy within any compact set. In terms of such a model, the performance analysis and the design of controllers and filters play important roles in the research of fuzzy systems. In this paper, we aim to survey some recent advances on the T-S fuzzy control and filtering problems with various network-induced phenomena. The network-induced phenomena under consideration mainly include communication delays, packet dropouts, signal quantization, and randomly occurring uncertainties (ROUs). With such network-induced phenomena, the developments on T-S fuzzy control and filtering issues are reviewed in detail. In addition, some latest results on this topic are highlighted. In the end, conclusions are drawn and some possible future research directions are pointed out.This work was supported in part by the National Natural Science Foundation of China under Grants 61134009, 61329301, 11301118 and 61174136, the Natural Science Foundation of Jiangsu Province of China under Grant BK20130017, the Fundamental Research Funds for the Central Universities of China under Grant CUSF-DH-D-2013061, the Royal Society of the U.K., and the Alexander von Humboldt Foundation of Germany

Decentralized sliding mode control and estimation for large-scale systems

This thesis concerns the development of an approach of decentralised robust control and estimation for large scale systems (LSSs) using robust sliding mode control (SMC) and sliding mode observers (SMO) theory based on a linear matrix inequality (LMI) approach. A complete theory of decentralized first order sliding mode theory is developed. The main developments proposed in this thesis are: The novel development of an LMI approach to decentralized state feedback SMC. The proposed strategy has good ability in combination with other robust methods to fulfill specific performance and robustness requirements. The development of output based SMC for large scale systems (LSSs). Three types of novel decentralized output feedback SMC methods have been developed using LMI design tools. In contrast to more conventional approaches to SMC design the use of some complicated transformations have been obviated. A decentralized approach to SMO theory has been developed focused on the Walcott-Żak SMO combined with LMI tools. A derivation for bounds applicable to the estimation error for decentralized systems has been given that involves unknown subsystem interactions and modeling uncertainty. Strategies for both actuator and sensor fault estimation using decentralized SMO are discussed.The thesis also provides a case study of the SMC and SMO concepts applied to a non-linear annealing furnace system modelderived from a distributed parameter (partial differential equation) thermal system. The study commences with a lumped system decentralised representation of the furnace derived from the partial differential equations. The SMO and SMC methods derived in the thesis are applied to this lumped parameter furnace model. Results are given demonstrating the validity of the methods proposed and showing a good potential for a valuable practical implementation of fault tolerant control based on furnace temperature sensor faults

Observer based active fault tolerant control of descriptor systems

The active fault tolerant control (AFTC) uses the information provided by fault detection and fault diagnosis (FDD) or fault estimation (FE) systems offering an opportunity to improve the safety, reliability and survivability for complex modern systems. However, in the majority of the literature the roles of FDD/FE and reconfigurable control are described as separate design issues often using a standard state space (i.e. non-descriptor) system model approach. These separate FDD/FE and reconfigurable control designs may not achieve desired stability and robustness performance when combined within a closed-loop system.This work describes a new approach to the integration of FE and fault compensation as a form of AFTC within the context of a descriptor system rather than standard state space system. The proposed descriptor system approach has an integrated controller and observer design strategy offering better design flexibility compared with the equivalent approach using a standard state space system. An extended state observer (ESO) is developed to achieve state and fault estimation based on a joint linear matrix inequality (LMI) approach to pole-placement and H∞ optimization to minimize the effects of bounded exogenous disturbance and modelling uncertainty. A novel proportional derivative (PD)-ESO is introduced to achieve enhanced estimation performance, making use of the additional derivative gain. The proposed approaches are evaluated using a common numerical example adapted from the recent literature and the simulation results demonstrate clearly the feasibility and power of the integrated estimation and control AFTC strategy. The proposed AFTC design strategy is extended to an LPV descriptor system framework as a way of dealing with the robustness and stability of the system with bounded parameter variations arising from the non-linear system, where a numerical example demonstrates the feasibility of the use of the PD-ESO for FE and compensation integrated within the AFTC system.A non-linear offshore wind turbine benchmark system is studied as an application of the proposed design strategy. The proposed AFTC scheme uses the existing industry standard wind turbine generator angular speed reference control system as a “baseline” control within the AFTC scheme. The simulation results demonstrate the added value of the new AFTC system in terms of good fault tolerance properties, compared with the existing baseline system

Robust de-centralized control and estimation for inter-connected systems

The thesis is concerned with the theoretical development of the control of inter-connected systems to achieve the whole overall stability and specific performance. A special included feature is the Fault-Tolerant Control (FTC) problem for the inter-connected system in terms of local subsystem actuator fault estimation. Hence, the thesis describes the main FTC challenges of distributed control of uncertain non-linear inter-connected systems. The basic principle adopted throughout the work is that the controller has two components, one involving the nominal control with unmatched components including uncertainties and disturbances. The second controller dealing with matched components including uncertainties and actuator faults.The main contributions of the thesis are summarised as follows:- The non-linear inter-connected systems are controlled by two controllers. The linear part via a linear matrix inequality (LMI) technique and the discontinuous part by using Integral Sliding Mode Control (ISMC) based on state feedback control.- The development of a new observer-based state estimate control strategy for non-linear inter-connected systems. The technique is applied either to every individual subsystem or to the whole as one shot system.- A new proposal of Adaptive Output Integral Sliding Mode Control (AOISMC) based only on output information plus static output feedback control is designed via an LMI formulation to control non-linear inter-connected systems. The new method is verified by application to a mathematical example representing an electrical power generator.- The development of a new method to design a dynamic control based on an LMI framework with Output Integral Sliding Mode Control (OISMC) to improve the stability and performance.- Using the above framework, making use of LMI tools and ISMC, a method of on-line actuator fault estimation has been proposed using the Proportional Multiple Integral Observer (PMIO) for fault estimation applicable to non-linear inter-connected systems

Robust de-centralized control and estimation for inter-connected systems

The thesis is concerned with the theoretical development of the control of inter-connected systems to achieve the whole overall stability and specific performance. A special included feature is the Fault-Tolerant Control (FTC) problem for the inter-connected system in terms of local subsystem actuator fault estimation. Hence, the thesis describes the main FTC challenges of distributed control of uncertain non-linear inter-connected systems. The basic principle adopted throughout the work is that the controller has two components, one involving the nominal control with unmatched components including uncertainties and disturbances. The second controller dealing with matched components including uncertainties and actuator faults. The main contributions of the thesis are summarised as follows: - The non-linear inter-connected systems are controlled by two controllers. The linear part via a linear matrix inequality (LMI) technique and the discontinuous part by using Integral Sliding Mode Control (ISMC) based on state feedback control. - The development of a new observer-based state estimate control strategy for non-linear inter-connected systems. The technique is applied either to every individual subsystem or to the whole as one shot system. - A new proposal of Adaptive Output Integral Sliding Mode Control (AOISMC) based only on output information plus static output feedback control is designed via an LMI formulation to control non-linear inter-connected systems. The new method is verified by application to a mathematical example representing an electrical power generator. - The development of a new method to design a dynamic control based on an LMI framework with Output Integral Sliding Mode Control (OISMC) to improve the stability and performance. - Using the above framework, making use of LMI tools and ISMC, a method of on-line actuator fault estimation has been proposed using the Proportional Multiple Integral Observer (PMIO) for fault estimation applicable to non-linear inter-connected systems

Decentralised sliding mode control for nonlinear interconnected systems with uncertainties

With the advances in science and technology, nonlinear large-scale interconnected systems have widely appeared in the real life. Traditional centralised control methods have inevitable disadvantages when they are used to deal with complex nonlinear interconnected systems with uncertainties. In connection with this, people desire to develop the novel control strategy which can be applied to complex interconnected systems. Therefore, decentralised sliding mode control (SMC) for interconnected systems has attracted great attention in related fields due to its advantages, for instance, simple structure, low cost of calculation, fast response, reduced-order sliding mode dynamics and insensitivity to matched variation of parameters and disturbances in systems. This thesis focuses on the development of decentralised SMC for nonlinear interconnected systems with uncertainties under certain assumptions. Several methods and different techniques have been considered in design of the controller to improve the robustness. The main contributions of this thesis include: • The state feedback decentralised SMC is developed for nonlinear interconnected systems with matched uncertainty and mismatched unknown interconnections. A state feedback decentralised SMC strategy, under the assumption that all system states are accessible, is proposed to attenuate the impact of the uncertainties by using bounds on uncertainties and interconnections. The bounds used in the design are fully nonlinear which provide higher applicability for different complex interconnected systems. Especially, for this fully nonlinear system, the proposed method does not need to use the technique of linearisation, which is widely used in existing work to deal with nonlinear interconnected systems with uncertainties. • The dynamic observer is applied to complex nonlinear interconnected systems with matched and mismatched uncertainties. This dynamic observer can estimate the system states which can not be achieved during the controller design. The proposed method has great identification ability with small estimated errors for the states of nonlinear interconnected systems with matched and mismatched uncertainties. It should be pointed out that the considered uncertainties of nonlinear interconnected systems have general forms, which means that the proposed method can be effectively used in more generalised nonlinear interconnected systems. • A variable structure observer-based decentralised SMC is proposed to control a class of nonlinear interconnected systems with matched and mismatched uncertainties. Based on the designed dynamic observer, a dynamic decentralised output feedback SMC using outputs and estimated states is presented to control the interconnected systems with matched and mismatched uncertainties. The nonlinear interconnections are employed in the control design to reduce the conservatism of the developed results. The bounds of the uncertainties are relaxed which are nonlinear and take more general forms. Moreover, the limitation for the interconnected system is reduced when compared with the existing results in which the proposed strategies adopt the full-order observer. Besides that, the presented method improves the robustness of nonlinear interconnected systems to be against the effects of uncertainties. This thesis also provides several numerical and practical simulations to demonstrate the effectiveness of the proposed decentralised SMC for nonlinear interconnected systems with matched uncertainty, mismatched uncertainty and nonlinear interconnections