2 research outputs found
Predictive grinding process optimisation and monitoring
Grinding is one of the oldest and most important metal removal processes, and is
capable of high dimensional and surface finish tolerances. It is a complex and
expensive process; industry has much to gain by increasing production rates to reduce
cost. The major limitation to higher production rates is the risk of thermal damage of
the workpiece. This is now being challenged by developments in “High Efficiency
Deep Grinding” which has been proven to produce low grinding temperatures at
extremely high material removal rates. In order to take advantage of these
developments, whilst maintaining the integrity of the workpiece, it is necessary for
production engineers to have tools available to them that allow the selection of
optimal process parameters and monitor grinding conditions to sustain this optimum.
A review of current research efforts in predictive and reactionary methods of
optimising grinding process highlight a number of failings. This study leads to the
development of a new system that employs analytical and empirically derived
indicators of thermal damage to enable an operator to select optimal but safe grinding
conditions. The system also provides a monitoring function that can warn of the onset
of thermal damage and make recommendations to the machine operator.
A demonstration of the systems possible benefits in an industrial context is presented.
Validation via simulation is also performed. Predicted finished workpiece
temperatures are compared against measurements taken using embedded
thermocouple and the PVD coating melt depth method. The ability of the system to
predict bum is also tested across a range of grinding conditions.
The possibility of using the system as part of an adaptive controller is also reviewed
and directions for further work are identified.MRe
In-process thermal damage detection in grinding with monitoring via Internet
This work aims the development of a dedicated system for detection of burning in surface grinding process, where the process will constantly be monitored through the acoustic emission and electric power of the induction motor drive. Acquired by an analog-digital converter, algorithms process the signals and a control signal is generated to inform the operator or interrupt the process in case of burning occurrence. Moreover, the system makes possible the process monitoring via Internet. Additionally, a comparative study between parameters DPO and FKS is carried through. In the experimental work one type of. steel (ABNT-1020 annealed) and one type of grinding wheel referred to as TARGA, model ART 3TG80.3 NVHB, were employed