A low-cost time-hopping impulse radio system for high data rate transmission

We present an efficient, low-cost implementation of time-hopping impulse radio that fulfills the spectral mask mandated by the FCC and is suitable for high-data-rate, short-range communications. Key features are: (i) all-baseband implementation that obviates the need for passband components, (ii) symbol-rate (not chip rate) sampling, A/D conversion, and digital signal processing, (iii) fast acquisition due to novel search algorithms, (iv) spectral shaping that can be adapted to accommodate different spectrum regulations and interference environments. Computer simulations show that this system can provide 110Mbit/s at 7-10m distance, as well as higher data rates at shorter distances under FCC emissions limits. Due to the spreading concept of time-hopping impulse radio, the system can sustain multiple simultaneous users, and can suppress narrowband interference effectively.Comment: To appear in EURASIP Journal on Applied Signal Processing (Special Issue on UWB - State of the Art

A Fully Differential Digital CMOS Pulse UWB Generator

A new fully-digital CMOS pulse generator for impulse-radio Ultra-Wide-Band (UWB) systems is presented. First, the shape of the pulse which best fits the FCC regulation in the 3.1-5 GHz sub-band of the entire 3.1-10.6 GHz UWB bandwidth is derived and approximated using rectangular digital pulses. In particular, the number and width of pulses that approximate an ideal template is found through an ad-hoc optimization methodology. Then a fully differential digital CMOS circuit that synthesizes the pulse sequence is conceived and its functionality demonstrated through post-layout simulations. The results show a very good agreement with the FCC requirements and a low power consumptio

Ultra wideband: applications, technology and future perspectives

Ultra Wide Band (UWB) wireless communications offers a radically different approach to wireless communication compared to conventional narrow band systems. Global interest in the technology is huge. This paper reports on the state of the art of UWB wireless technology and highlights key application areas, technological challenges, higher layer protocol issues, spectrum operating zones and future drivers. The majority of the discussion focuses on the state of the art of UWB technology as it is today and in the near future

UWB system based on gain-switched laser

Simulation results based on an UltraWideBand (UWB) system employing a gain-switched laser are presented. 156 Mb/s data stream modulates the position of short electrical pulses, which are then used to gain-switch the laser. The output optical pulses are then transmitted over fiber to a Remote Antenna Unit (RAU), where the signal is detected and undergoes spectral shaping (according to UWB requirements). The resulting Pulse Position Modulated (PPM) electrical impulses are then converted to an amplitude-modulated signal and down-converted. Bit Error Rate measurements are carried out on a back-to-back system and a transmission link (over different lengths of fiber

An N-bit digitally variable ultra wideband pulse generator for GPR and UWB applications

This paper presents a low-cost Ultra Wideband (UWB) pulse generator that can vary the pulse duration digitally by using a Step Recovery Diode (SRD), microstrip transmission lines and PIN diodes. First, a sharp edge is generated by using a SRD circuitry. Then a pulse is formed from the sharp edge through the use of transmission lines and the PIN diodes. Based on the number of transmission lines (N), the duration of the pulse can be varied in steps. The UWB pulse generator circuits are implemented on an FR-4 substrate using microstrip line technology and UWB pulses with durations of 550 to 2400 psec are measured. N2 Ke

Impulse Radio Systems with Multiple Types of Ultra-Wideband Pulses

Spectral properties and performance of multi-pulse impulse radio ultra-wideband systems with pulse-based polarity randomization are analyzed. Instead of a single type of pulse transmitted in each frame, multiple types of pulses are considered, which is shown to reduce the effects of multiple-access interference. First, the spectral properties of a multi-pulse impulse radio system is investigated. It is shown that the power spectral density is the average of spectral contents of different pulse shapes. Then, approximate closed-form expressions for bit error probability of a multi-pulse impulse radio system are derived for RAKE receivers in asynchronous multiuser environments. The theoretical and simulation results indicate that impulse radio systems that are more robust against multiple-access interference than a "classical" impulse radio system can be designed with multiple types of ultra-wideband pulses.Comment: To be presented at the 2005 Conference on Information Sciences and System

Optical distribution of OFDM and impulse-radio UWB in FTTH networks

Proposal, experimental demonstration and performance comparison of impulse-radio UWB and OFDM UWB distribution in FTTH networks for high-definition audio/video broadcasting is presented. OFDM-UWB exhibits better performance compared with its impulse-radio counterpart with better spectral efficiency

Photonic processing of microwave signals

La distribution par fibre optique de signaux de type « ultra-wideband (UWB)» requiert le développement de nouvelles technologies photoniques qui seront le sujet d'étude de cette thèse. Nous commençons avec un démonstration expérimentale d'une technique de sculpture d'impulsions qui offre une solution économique et à faible consommation de puissance pour les systèmes UWB . Dans cette étude, nous procédons à l'apodisation de deux réseaux Bragg identiques avec une variation de période linéaire qui sont placés aux deux entrées d'un photodétecteur balancé. L'apodisation est réalisée par l'application d'un profile de température à l'aide d'éléments résistif de petite dimensions, ce qui permet une consommation énergétique réduite et une bonne résolution spectrale. Le filtrage spectral d'une source laser puisée suivi d'une conversion fréquence-temps par propagation dans une fibre optique standard permet de générer une impulsion UWB efficace d'un point de vue énergétique pour les communications à courte portée dans la bande spectrale de 3 a 10 GHz. Dans un deuxième temps, pour générer des signaux passe-bande à haute fréquence, nous avons utilisé un laser puisé à commutation de gain. Après la conversion optique/électrique des impulsions en utilisant des filtres optiques et RF appropriés, nous réussissons à générer des signaux large bande dans des bandes spectrales ayant des fréquences centrales de 25, 35 et 45 GHz. Nous examinons diverses configurations de filtres permettant cette conversion selon qu'il y ait ou non transmission dans une fibre optique. Finalement, nous démontrons la détection de signaux RF dans le domaine optique par le design et la fabrication de filtres adaptés. Notre récepteur utilise un modulateur de Mach-Zehnder pour faire la conversion électrique-optique et des filtres à base de réseau de Bragg comme filtres adaptés. Nous examinons la performance du récepteur pour deux conditions de polarisation différentes du Mach-Zehnder. Nous avons conçu des filtres adaptés pour ces deux cas et nous discutons de la performance résultant

A VHDL-AMS Simulation Environment for an UWB Impulse Radio Transceiver

Ultra-Wide-Band (UWB) communication based on the impulse radio paradigm is becoming increasingly popular. According to the IEEE 802.15 WPAN Low Rate Alternative PHY Task Group 4a, UWB will play a major role in localization applications, due to the high time resolution of UWB signals which allow accurate indirect measurements of distance between transceivers. Key for the successful implementation of UWB transceivers is the level of integration that will be reached, for which a simulation environment that helps take appropriate design decisions is crucial. Owing to this motivation, in this paper we propose a multiresolution UWB simulation environment based on the VHDL-AMS hardware description language, along with a proper methodology which helps tackle the complexity of designing a mixed-signal UWB System-on-Chip. We applied the methodology and used the simulation environment for the specification and design of an UWB transceiver based on the energy detection principle. As a by-product, simulation results show the effectiveness of UWB in the so-called ranging application, that is the accurate evaluation of the distance between a couple of transceivers using the two-way-ranging metho