10 research outputs found

    Impact of receive diversity on the performance of amplify-and-forward relaying under APS and IPS power constraints

    Full text link

    Cooperative Diversity for Inter-Vehicular Communications

    Get PDF
    Recent technological advances and pervasiveness of wireless communication devices have offered novel and promising solutions to the road safety problem and on-the-go entertainment. One such solution is the Inter-Vehicular Communications (IVC) where vehicles cooperate in receiving and delivering the messages to each other, establishing a decentralized communication system. The communication between vehicles can be made more effective and reliable at the physical layer by using the concept of space-time coding (STC). STC demonstrated that the deployment of multiple antennas at the transmitter allows for simultaneous increase in throughput and reliability because of the additional degree of freedom offered by the spatial dimension of the wireless. However, the use of multiple antenna at the receiver is not feasible because of the size and power limitations. Cooperative diversity, which is also known as user cooperation is ideal to overcome these limitations by introducing a new concept of using the antenna of neighboring node. This technique exploits the broadcast nature of wireless transmissions and creates a virtual (distributed) antenna array through cooperating nodes to realize spatial diversity advantage. Although there has been a growing literature on cooperative diversity, the current literature is mainly limited to Rayleigh fading channel model which typically assumes a wireless communication scenario with a stationary base station antenna above roof-top level and a mobile station at street level. In this thesis, we investigate cooperative diversity for inter-vehicular communication based on cascaded Rayleigh fading. This channel model provides a realistic description of inter-vehicular channel where two or more independent Rayleigh fading processes are assumed to be generated by independent groups of scatters around the two mobile terminals. We investigate the performance of amplify-and-forward relaying for an inter-vehicular cooperative scheme assisted by either a road-side access point or another vehicle which acts as a relay. Our diversity analysis reveals that the cooperative scheme is able to extract the full distributed spatial diversity. We further formulate a power allocation problem for the considered scheme to optimize the power allocated to broadcasting and relaying phases. Performance gains up to 3 dB are obtained through optimum power allocation depending on the relay location

    Performance analysis of wireless relay systems

    Get PDF
    There has been phenomenal interest in applying space-time coding techniques in wireless communications in the last two decades. In general, the benefit of applying space-time codes in multiple-input, multiple-output (MIMO) wireless channels is an increase in transmission reliability or system throughput (capacity). However, such a benefit cannot be obtained in some wireless systems where size or other constraints preclude the use of multiple antennas. As such, wireless relay communications has recently been proposed as a means to provide spatial diversity in the face of this limitation. In this approach, some users or relay nodes assist the transmission of other users’ information. This dissertation contributes to the advancement of wireless relay communications by investigating the performance of various relaying signal processing methods under different practical fading environments. In particular, it examines two main relaying methods, namely decode-and-forward (DF) and amplify-and-forward (AF). For DF, the focus is on the diversity analysis of relaying systems under various practical protocols when detection error at relays is taken into account. In order to effectively mitigate the phenomenon of error propagation, the smart relaying technique proposed by Wang et al. in [R1] is adopted. First, diversity analysis of a single-relay system under the scenario that only the relay is allowed to transmit in the second time slot (called Protocol II) is carried out. For Nakagami and Hoyt generalized fading channels, analytical and numerical results are provided to demonstrate that the system always obtains the maximal diversity when binary phase shift keying (BPSK) modulation is used. Second, a novel and low-complexity relaying system is proposed when smart relaying and equal gain combing (EGC) techniques are combined. In the proposed system, the destination requires only the phases of the channel state information in order to detect the transmitted signals. For the single-relay system with M-ary PSK modulation, it is shown that the system can achieve the maximal diversity under Nakagami and Hoyt fading channels. For the K-relay system, simulation results suggest that the maximal diversity can also be achieved. Finally, the diversity analysis for a smart relaying system under the scenario when both the source and relay are permitted to transmit in the second time slot (referred to as Protocol I) is presented. It is shown that Protocol I can achieve the same diversity order as Protocol II for the case of 1 relay. In addition, the diversity is very robust to the quality of the feedback channel as well as the accuracy of the quantization of the power scaling implemented at the relay. For AF, the dissertation considers a fixed-gain multiple-relay system with maximal ratio combining (MRC) detection at the destination under Nakagami fading channels. Different from the smart relaying for DF, all the channel state information is assumed to be available at the destination in order to perform MRC for any number of antennas. Upperbound and lowerbound on the system performance are then derived. Based on the bounds, it is shown that the system can achieve the maximal diversity. Furthermore, the tightness of the upperbound is demonstrated via simulation results. With only the statistics of all the channels available at the destination, a novel power allocation (PA) is then proposed. The proposed PA shows significant performance gain over the conventional equal PA

    Adaptive OFDM Cooperative Systems

    Get PDF
    Cooperative communication is a promising technique for wireless communication systems where wireless nodes cooperate together in transmitting their information. Such communication transmission technique, which realizes the multiple antenna arrays in a distributed manner over multiple wireless nodes, succeeds in extending the network coverage, increasing throughput, improving both link reliability and spectral efficiency. Available channel state information at the transmitting nodes can be used to design adaptive transmission schemes for improving the overall system performance. Throughout our work, we adaptively change loaded power and/or bit to the Orthogonal Frequency Division Multiplexing (OFDM) symbol in order to minimize bit error rate or maximize the throughput. In the first part of this dissertation, we consider single-relay OFDM system with amplify-and-forward relaying. We propose three algorithms to minimize the bit error rate under total power constraint and fixed transmission rate. These algorithms are optimal power loading, optimal bit loading and optimal bit and power loading. Through Monte Carlo simulations we study the proposed system performance and discuss the effect of relay location and channel estimation. This study shows that the proposed algorithms result in exploiting the multi-path diversity and achieving extra coding gain. In the second part, we extend the problem to a multi-relay OFDM network but with decode-and-forward relaying. We propose an adaptive power loading algorithm to minimize the bit error rate under total power constraint based on two relay selection strategies. The proposed system leads to achieve both multi-path and cooperative spatial diversity using maximal-ratio combiner for the detection. In the last part, we consider also multi-relay network but with amplify and forward relaying. We optimize the bit loading coefficients to maximize the throughput under target bit error rate constraint. The proposed algorithm is considered more practical since it takes into consideration the channel estimation quality. The considered adaptive system has less complexity compared with other adaptive systems through reducing the feedback amount. Furthermore, the full network channel state information is needed only at the destination

    Optimum Power Allocation for Cooperative Communications

    Get PDF
    Cooperative communication is a new class of wireless communication techniques in which wireless nodes help each other relay information and realize spatial diversity advantages in a distributed manner. This new transmission technique promises significant performance gains in terms of link reliability, spectral efficiency, system capacity, and transmission range. Analysis and design of cooperative communication wireless systems have been extensively studied over the last few years. The introduction and integration of cooperative communication in next generation wireless standards will lead to the design of an efficient and reliable fully-distributed wireless network. However, there are various technical challenges and open issues to be resolved before this promising concept becomes an integral part of the modern wireless communication devices. A common assumption in the literature on cooperative communications is the equal distribution of power among the cooperating nodes. Optimum power allocation is a key technique to realize the full potentials of relay-assisted transmission promised by the recent information-theoretic results. In this dissertation, we present a comprehensive framework for power allocation problem. We investigate the error rate performance of cooperative communication systems and further devise open-loop optimum power allocation schemes to optimize the performance. By exploiting the information about the location of cooperating nodes, we are able to demonstrate significant improvements in the system performance. In the first part of this dissertation, we consider single-relay systems with amplify-and-forward relaying. We derive upper bounds for bit error rate performance assuming various cooperation protocols and minimize them under total power constraint. In the second part, we consider a multi-relay network with decode-and-forward relaying. We propose a simple relay selection scheme for this multi-relay system to improve the throughput of the system, further optimize its performance through power allocation. Finally, we consider a multi-source multi-relay broadband cooperative network. We derive and optimize approximate symbol error rate of this OFDMA (orthogonal frequency division multiple access) system

    Cooperative Techniques for Next Generation HF Communication Systems

    Get PDF
    The high frequency (HF) band lies within 2-30 MHz of the electromagnetic spectrum. For decades, the HF band has been recognized as the primary means of long-range wireless communications. When satellite communication first emerged in 1960s, HF technology was considered to be obsolete. However, with its enduring qualities, HF communication survived through this competition and positioned itself as a powerful complementary and/or alternative technology to satellite communications. HF systems have been traditionally associated with low-rate data transmission. With the shift from analog to digital in voice communication, and increasing demands for high-rate data transmission (e.g., e-mail, Internet, FTP), HF communication has been going through a renaissance. Innovative techniques are required to push the capacity limits of the HF band. In this dissertation, we consider cooperative communication as an enabling technology to meet the challenging expectations of future generation HF communication systems. Cooperative communication exploits the broadcast nature of wireless transmission and relies on the cooperation of users relaying the information to one another. We address the design, analysis, and optimization of cooperative HF communication systems considering both multi-carrier and single-carrier architectures. As the multi-carrier HF system, we consider the combination of the orthogonal frequency division multiplexing (OFDM) with the bit interleaved coded modulation (BICM) as the underlying physical layer platform. It is assumed that cooperating nodes may use different HF propagation mechanisms, such as near-vertical-incidence sky wave (NVIS) and surface wave, to relay their received signals to the destination in different environmental scenarios. Diversity gain analysis, optimum relay selection strategy and power allocation between the source and relays are investigated for the proposed cooperative HF system. For single-carrier HF systems, we first derive a matched-filer-bound (MFB) on the error rate performance of the non-regenerative cooperative systems. The results from the MFB analysis are also used for relay selection and power allocation in the multi-relay cooperative systems. To overcome the intersymbol interference impairment induced by frequency-selectivity of the HF channel, equalization is inevitable at the destination in a single-carrier system. In this work, we investigate the minimum-mean-square-error (MMSE) based linear/decision-feedback frequency domain equalizers (FDEs). Both symbol-spaced and fractionally-spaced implementations of the proposed FDEs are considered and their performance is compared under different channel conditions and sampling phase errors at the relay and destination nodes.1 yea

    Channel Estimation and Equalization for Cooperative Communication

    Get PDF
    The revolutionary concept of space-time coding introduced in the last decade has demonstrated that the deployment of multiple antennas at the transmitter allows for simultaneous increase in throughput and reliability because of the additional degrees of freedom offered by the spatial dimension of the wireless channel. However, the use of antenna arrays is not practical for deployment in some practical scenarios, e. g. , sensor networks, due to space and power limitations. A new form of realizing transmit diversity has been recently introduced under the name of user cooperation or cooperative diversity. The basic idea behind cooperative diversity rests on the observation that in a wireless environment, the signal transmitted by the source node is overheard by other nodes, which can be defined as "partners" or "relays". The source and its partners can jointly process and transmit their information, creating a "virtual antenna array" and therefore emulating transmit diversity. Most of the ongoing research efforts in cooperative diversity assume frequency flat channels with perfect channel knowledge. However, in practical scenarios, e. g. broadband wireless networks, these assumptions do not apply. Frequency-selective fading and imperfect channel knowledge should be considered as a more realistic channel model. The development of equalization and channel estimation algorithms play a crucial element in the design of digital receivers as their accuracy determine the overall performance. This dissertation creates a framework for designing and analyzing various time and frequency domain equalization schemes, i. e. distributed time reversal (D-TR) STBC, distributed single carrier frequency domain (D-SC-FDE) STBC, and distributed orthogonal frequency division multiplexing (D-OFDM) STBC schemes, for broadband cooperative communication systems. Exploiting the orthogonally embedded in D-STBCs, we were able to maintain low-decoding complexity for all underlying schemes, thus, making them excellent candidates for practical scenarios, such as multi-media broadband communication systems. Furthermore, we propose and analyze various non-coherent and channel estimation algorithms to improve the quality and reliability of wireless communication networks. Specifically, we derive a non-coherent decoding rule which can be implemented in practice by a Viterbi-type algorithm. We demonstrate through the derivation of a pairwise error probability expression that the proposed non-coherent detector guarantees full diversity. Although this decoding rule has been derived assuming quasi-static channels, its inherent channel tracking capability allows its deployment over time-varying channels with a promising performance as a sub-optimal solution. As a possible alternative to non-coherent detection, we also investigate the performance of mismatched-coherent receiver, i. e. , coherent detection with imperfect channel estimation. Our performance analysis demonstrates that the mismatched-coherent receiver is able to collect the full diversity as its non-coherent competitor over quasi-static channels. Finally, we investigate and analyze the effect of multiple antennas deployment at the cooperating terminals assuming different relaying techniques. We derive pairwise error probability expressions quantifying analytically the impact of multiple antenna deployment at the source, relay and/or destination terminals on the diversity order for each of the relaying methods under consideration
    corecore