Design of rate-adaptive MAC and medium aware routing protocols for multi-rate, multi-hop wireless networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The IEEE 802.11 standard conformant wireless communication stations have multi-rate transmission capability. To achieve greater communication efficiency, multi-rate capable stations use rateadaptation to select appropriate transmission rate according to variations in the channel quality. The thesis presents two rate-adaptation schemes, each belonging to one of the two classes of rateadaptation schemes i.e.(1) the frame-transmission statistics based schemes, and (2) Signal-to-Noise Ratio (SNR) based, closed loop schemes. The SNR-based rate-adaptation scheme, proposed in this thesis uses a novel mechanism of delivering a receiver’s feedback to a transmitter; without requiring any modification in the standard frames as suggested by existing research. The frame-transmissionstatistics based rate adaptation solution uses an on-demand incremental strategy for selecting a rate-selection threshold. This solution is based on a cross-layer communication framework, where the rate-adaptation module uses information to/from the Application layer along with relevant information from the Medium Access Control (MAC) sub-layer. The proposed solutions are highly responsive when compared with existing rate-adaptation schemes; responsiveness is one of the key factors in the design of such protocols. The novel feedback mechanism makes it possible to achieve frame-loss differentiation with just three frames, avoiding the use of Request To Send/ Clear To Send (RTS/CTS) frames and further delays in this process. Performance tests have affirmed that the proposed rate-adaptation schemes are energy efficient; with efficiency up to 19% in specific test scenarios. In terms of throughput and frame loss-differentiation mechanisms, the proposed schemes have shown significantly better performance.Routing protocols for Mobile Ad-Hoc Networks (MANETs) use broadcast frames during the route discovery process. The 802.11 mandates the use of different transmission rates for broadcast and unicast (data-) frames. In many cases it causes creation of communication gray zones, where stations which are marked as ‘reachable neighbours’ using the broadcast frames (using lower transmission rate) are not accessible during normal, unicast communication (mainly at a higher rate). Similarly, higher device density, interference and mobility cause variable medium access delays. The IEEE 802.11e introduces four different MAC level queues for four access categories, maintaining service priority within the queues; which implies that frames from a higher priority queue are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result these factors are not considered which result in severe performance deterioration. To meet such challenges, the thesis presents a medium aware distance vector (MADV) routing protocol for MANETs. MADV uses MAC and physical layer (PHY) specific information in the route metric and maintains a separate route per-AC-per-destination in its routing tables. The MADV-metric can be incorporated into various routing rotocols and its applicability is determined by the possibility of provision of MAC dependent arameters that are used to determine the hop-by-hop MADV-metric values. Simulation tests and omparison with existing MANET protocols demonstrate the effectiveness of incorporating the medium dependent parameters and show that MADV is significantly better in terms of end-to-end delay and throughput

Loss Diagnosis and Indoor Position Location System based on IEEE 802.11 WLANs

Wireless local area networks (WLANs) have been widely deployed to provide short range broadband communications. Due to the fast evolvement of IEEE 802.11 based WLAN standards and various relevant applications, many research efforts have been focused on the optimization of WLAN data rate, power and channel utilization efficiency. On the other hand, many emerging applications based on WLANs have been introduced. Indoor position location (IPL) system is one of such applications which turns IEEE 802.11 from a wireless communications infrastructure into a position location network. This thesis mainly focuses on data transmission rate enhancement techniques and the development of IEEE 802.11 WLAN based IPL system with improved locationing accuracy. In IEEE 802.11 systems, rate adaptation algorithms (RAAs) are employed to improve transmission efficiency by choosing an appropriate modulation and coding scheme accord­ ing to point-to-point channel conditions. However, due to the resource-sharing nature of WLANs, co-channel interferences and frame collisions cannot be avoided, which further complicates the wireless environment and makes the RAA design a more challenging task. As WLAN performance depends on many dynamic factors such as multipath fading and co-channel interferences, differentiating the cause of performance degradation such as frame losses, which is known as loss diagnosis techniques, is essential for performance enhance­ ments of existing rate adaptation schemes. In this thesis, we propose a fast and reliable collision detection scheme for frame loss diagnosis in IEEE 802.11 WLANs. Collisions are detected by tracking changes of the signal-to-interference-and-noise-ratio (SINR) in IEEE 802.11 WLANs with a nonparametric order-based cumulative sum (CUSUM) algorithm for rapid loss diagnosis. Numerical simulations are conducted to evaluate the effectiveness of the proposed collision detection scheme. The other aspect of this thesis is the investigation of an IEEE 802.11 WLAN based IPL system. WLAN based IPL systems have received increasing attentions due to their variety of potential applications. Instead of relying on dedicated locationing networks and devices, IEEE 802.11 WLAN based IPL systems utilize widely deployed IEEE 802.11 WLAN infrastructures and standardized wireless stations to determine the position of a target station in indoor environments. iii Abstract In this thesis, a WLAN protocol-based distance measurement technique is investigated, which takes advantages of existing IEEE 802.11 data/ACK frame exchange sequences. In the proposed distance measurement technique, neither dedicated hardware nor hardware modifications is required. Thus it can be easily integrated into off-the-shelf commercial, inexpensive WLAN stations for IPL system implementation. Field test results confirm the efficacy of the proposed protocol-based distance measurement technique. Furthermore, a preliminary IPL system based on the proposed method is also developed to evaluate the feasibility of the proposed technique in realistic indoor wireless environments

STiCMAC: A MAC Protocol for Robust Space-Time Coding in Cooperative Wireless LANs

Relay-assisted cooperative wireless communication has been shown to have significant performance gains over the legacy direct transmission scheme. Compared with single relay based cooperation schemes, utilizing multiple relays further improves the reliability and rate of transmissions. Distributed space-time coding (DSTC), as one of the schemes to utilize multiple relays, requires tight coordination between relays and does not perform well in a distributed environment with mobility. In this paper, a cooperative medium access control (MAC) layer protocol, called \emph{STiCMAC}, is designed to allow multiple relays to transmit at the same time in an IEEE 802.11 network. The transmission is based on a novel DSTC scheme called \emph{randomized distributed space-time coding} (\emph{R-DSTC}), which requires minimum coordination. Unlike conventional cooperation schemes that pick nodes with good links, \emph{STiCMAC} picks a \emph{transmission mode} that could most improve the end-to-end data rate. Any station that correctly receives from the source can act as a relay and participate in forwarding. The MAC protocol is implemented in a fully decentralized manner and is able to opportunistically recruit relays on the fly, thus making it \emph{robust} to channel variations and user mobility. Simulation results show that the network capacity and delay performance are greatly improved, especially in a mobile environment.Comment: This paper is a revised version of a paper with the same name submitted to IEEE Transaction on Wireless Communications. STiCMAC protocol with RTS/CTS turned off is presented in the appendix of this draf