Ku-band High Efficiency Antenna with Corporate-Series-Fed Microstrip Array

Excellent efficiency of a linearly polarized microstrip array in Ku-band is achieved by having proper impedance matching throughout the array and by properly using the corporate and series fed by microstrip transmission lines. The cavity-backed microstrip patch is used to obtain relatively wide bandwidth. The auto-tracking Ku-band antenna in the azimuth direction has developed with a very low profile for vehicle\u27s rooftop mounting, as well as, a low manufacturing cost. The main beam of array is tilted 15° away from the broadside direction to provide optimum coverage for Korea satellite III

Enhancement of Antenna Array Performance Using Reconfigurable Slot-Ring Antennas and Integrated Filter/Antennas

As modern communication system technology develops, the demand for devices with smaller size, higher efficiency, and more functionality has increased dramatically. In addition, highly integrated RF-front-end modules with a reduced footprint and less transition loss between cascaded devices are desirable in most advanced wireless communication systems. Antenna arrays are widely used in wireless communication systems due to their high directivity and beam steering capability. Moreover, antenna arrays are preferred in mobile communication systems for diversity reception to reduce signal fading effects. In order to meet the various requirements of rapidly developing wireless communication systems, low cost, compact, multifunctional integrated antenna arrays are in high demand. Reconfigurable antennas that can flexibly adapt to different applications by dynamically changing their frequency and radiation properties have attracted a lot of attention. Frequency, radiation pattern, polarization, or a combination of two or more of these parameters in the reconfiguration of antennas was studied and presented in recent years. A single reconfigurable antenna is able to replace multiple traditional antennas and accomplish different tasks. Thus, the complexity of wireless communication systems can be greatly reduced with a smaller device size. On the other hand, the integration of antennas with other devices in wireless communication systems that can improve the efficiency and shrink the device size is a growing trend in antenna technology. Compact and highly efficient integrated filters and antennas were studied previously; the studies show that by seamlessly co-designing filters with patch antennas, the fractional bandwidth (FBW) of the antennas can be enhanced as compared to stand-alone antennas. However, the advantages of both the reconfigurable antenna and integrated filter/antenna technology have not been fully applied to antenna array applications. Therefore, this dissertation explores how to maximize the antenna array performance using reconfigurable antennas and integrated filter/antennas. A continuously frequency reconfigurable slot-ring antenna/array with switches and varactors is presented first. By changing the state of the loaded switches, the reconfigurable slot-ring antenna/array is able to operate as an L-band slot-ring antenna or a 2x2 S-band slot-ring antenna array. In each frequency band, the operation frequency of the antenna/array can be continuously tuned with the loaded varactors. To further enhance the functionality of the reconfigurable slot-ring antenna array, a dual-polarized fractal-shaped reconfigurable slot-ring antenna/array is developed with a reduced number of switches and an increased FBW. Additionally, ground plane solutions are explored to achieve single-sided radiation. The benefits of filter/antenna integration are also investigated in both linearly polarized patch phased arrays and circularly polarized patch antenna arrays. Finally, a preliminary study of a tunable integrated evanescent mode filter/antenna is conducted to validate the concept of combining reconfigurable antennas and integrated filter/antennas

Design Of A Wideband Dual-polarized Cavity Backed Slot Antenna

A new technique for designing wideband dual-polarized cavity-backed slot antennas is presented. The structure is in the form of a double-resonant, dual-polarized slot antenna backed by a shallow substrate integrated cavity with a depth of approximately one tenth the free space wavelength. The presence of the cavity behind the slot enhances the antenna\u27s directivity and reduces the possibility of surface wave propagation in the antenna substrate when the element is used in an array environment. Moreover, the dual-polarized nature of this radiating element may be exploited to synthesize any desired polarization (vertical, horizontal, RHCP, or LHCP). The double-resonant behavior observed in this substrate-integrated cavity-backed slot antenna (SICBSA) is utilized to enhance its bandwidth compared to a typical cavity-backed slot antenna. A prototype of the proposed antenna is fabricated and tested. Measurement results indicate that a bandwidth of 19%, an average gain of 5.3 dB, and a wideband differential isolation of 30 dB can be achieved using this technique. The principles of operation along with the measurement results of the fabricated prototype are presented and discussed in this dissertation. The SICBSA is investigated as a candidate for use as an array element. A uniform two element phased array is demonstrated to locate the main beam from boresight to thirty degrees. The potential effects of mutual coupling and surface wave propagation are considered and analyzed

2009 Index IEEE Antennas and Wireless Propagation Letters Vol. 8

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

2008 Index IEEE Transactions on Control Systems Technology Vol. 16

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

Q-Band Millimeter-Wave Antennas: An Enabling Technology for MultiGigabit Wireless Backhaul

[EN] The bandwidth demands in mobile communication systems are growing exponentially day by day as the number of users has increased drastically over the last five years. This mobile data explosion, together with the fixed service limitations, requires a new approach to support this increase in bandwidth demand. Solutions based on lower-frequency microwave wireless systems may be able to meet the bandwidth demand in a short term. However, with the small-cell mass deployment requiring total capacities of 1 Gb/s/km2, scalable, multigigabit backhaul systems are required. Millimeter-wave technology fits nicely into these new backhaul scenarios as it provides extended bandwidth for high-capacity links and adaptive throughput rate, which allows efficient and flexible deployment. Besides these advantages, millimeter-wave solutions become even more attractive when the cost of backhaul solutions and the cost of spectrum licenses are factored in. Compared to the cost of laying fiber to a cell base station, which is the only other scalable solution, the millimeter-wave solution becomes the most appropriate approach.The research leading to these results received funding from the European Commission's seventh Framework Programme under grant agreement 288267.Vilar Mateo, R.; Czarny, R.; Lee, ML.; Loiseaux, B.; Sypek, M.; Makowski, M.; Martel, C.... (2014). Q-Band Millimeter-Wave Antennas: An Enabling Technology for MultiGigabit Wireless Backhaul. IEEE Microwave Magazine. 15(4):121-130. https://doi.org/10.1109/MMM.2014.2308769S12113015

On the Development of Conductive Textile Antennas

UWB systems are becoming increasingly utilized due to their use in a variety of applications. Meanwhile, many advances have been achieved in the realm of conductive textiles. These textiles can be used as a sensing system or implemented wearable antennas. Combining these two applications is attractive for a number of reasons. First, wearable antennas constructed entirely from fabric offer a cost- effective, flexible solution when compared to rigid antennas. Second UWB technology is also attractive for body area network applications due to the low power operation and the inherent low radiated power in its system design. In our implementation accurately defined textile antennas have been developed using a laser machine with high precision cutting capabilities. The textile antennas are comprised of a conductive fabric layer that is laser defined and can be easily incorporated into uniforms and garments using a simple iron-on process. We have developed and present a monopole antenna design geared towards UWB applications. We show that these UWB textile antennas can be applied to localization systems and can provide accurate estimation of wearers location. Wide-band textile slot antennas have been developed too. The antennas are composed of three textile layers: the top and bottom are conducting layers and are precisely defined by a laser cutting machine, while the third layer is a textile dielectric layer sandwiched between these two conducting layers. A single, two-element and four-element array slot antennas have been developed and successfully tested. The developed antennas offer flexible, light-weight and bendable properties. The iron-on process allows for the fabric to be washed without losing its adhesion. The antenna fabrication and the capabilities of the laser precision technique and its extension to development of large area antenna arrays will be presented. Conductive textiles can also be implemented to meet the requirements of combat wound detection systems. Using these textiles, a fabric-based sensor can be developed to accurately detect and localize the bullets penetration

Miniaturization of Microstrip Patch Antennas for Gps Applications

The desire to incorporate multiple frequency bands of operation into personal communication devices has led to much research on reducing the size of antennas while maintaining adequate performance. GPS is one such application, where dual frequency operation, bandwidth and circular polarization pose major challenges when using traditional miniaturization techniques. Various loading methods have been studied to reduce the resonant frequency of the antenna – high permittivity dielectric loading, slot loading and cavity loading – while examining their effects on bandwidth and gain. The objective of this thesis is to provide guidelines on what is achievable using these miniaturization methods and insight into how to implement them effectively

Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

Design and Analysis of Substrate-Integrated Cavity-Backed Antenna Arrays for Ku-Band Applications

Mobile communication has become an essential part of our daily life. We love the flexibility of wireless cell phones and even accept their lower quality of service when compared to wired links. Similarly, we are looking forward to the day that we can continue watching our favorite TV programs while travelling anywhere and everywhere. Mobility, flexibility, and portability are the themes of the next generation communication. Motivated and fascinated by such technology breakthroughs, this effort is geared towards enhancing the quality of wireless services and bringing mobile satellite reception one step closer to the market. Meanwhile, phased array antennas are vital components for RADAR applications where the antenna is required to have certain scan capabilities. One of the main concerns in that perspective is how to avoid the potential of scan blindness in the required scan range. Targeting to achieve wide-band wide-scan angle phased arrays free from any scan blindness our efforts is also geared. Conventionally, the key to lower the profile of the antenna is to use planar structures. In that perspective microstrip patch antennas have drawn the attention of antenna engineers since the 1970s due to their attractive features of being low profile, compact size, light weight, and amenable to low-cost PCB fabrication processes. However, patch elements are basically resonating at a single frequency, typically have \u3c2% bandwidth, which is a major deficit that impedes their usage in relatively wide-band applications. There are various approaches to enhance the patch antennas bandwidth including suspended substrates, multi-stack patches, and metalized cavities backing these patches. Metalized cavity-backed patch structures have been demonstrated to give the best performance, however, they are very expensive to manufacture. In this dissertation, we develop an alternative low-cost bandwidth enhancement topology. The proposed topology is based on substrate-integrated waveguides. The great potential of the proposed structure lies in being amenable to the conventional PCB fabrication. Moreover, substrate-integrated cavity-backed structures facilitate the design of sophisticated arrays that are very expensive to develop using the conventional metalized cavity-backed topology, which includes the common broadside arrays used in fixed-beam applications and the scanned phased arrays used in RADAR applications