Distributed intelligent robotics : research & development in fault-tolerant control and size/position identification : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Computer Systems Engineering at Massey University

This thesis presents research conducted on aspects of intelligent robotic systems. In the past two decades, robotics has become one of the most rapidly expanding and developing fields of science. Robotics can be considered as the science of using artificial intelligence in the physical world. Many areas of study exist in robotics. Among these, two fields that are of paramount importance in real world applications are fault tolerance, and sensory systems. Fault tolerance is necessary since a robot in the real world could encounter internal faults, and may also have to continue functioning under adverse conditions. Sensory mechanisms are essential since a robot will possess little intelligence if it does not have methods of acquiring information about its environment. Both these fields are researched in this thesis. In particular, emphasis is placed on distributed intelligent autonomous systems. Experiments and simulations have been conducted to investigate design for fault tolerance. A suitable platform was also chosen for an implementation of a visual system, as an example of a working sensory mechanism

Reliable Linear, Sesquilinear and Bijective Operations On Integer Data Streams Via Numerical Entanglement

A new technique is proposed for fault-tolerant linear, sesquilinear and bijective (LSB) operations on $M$ integer data streams ($M\geq3$), such as: scaling, additions/subtractions, inner or outer vector products, permutations and convolutions. In the proposed method, the $M$ input integer data streams are linearly superimposed to form $M$ numerically-entangled integer data streams that are stored in-place of the original inputs. A series of LSB operations can then be performed directly using these entangled data streams. The results are extracted from the $M$ entangled output streams by additions and arithmetic shifts. Any soft errors affecting any single disentangled output stream are guaranteed to be detectable via a specific post-computation reliability check. In addition, when utilizing a separate processor core for each of the $M$ streams, the proposed approach can recover all outputs after any single fail-stop failure. Importantly, unlike algorithm-based fault tolerance (ABFT) methods, the number of operations required for the entanglement, extraction and validation of the results is linearly related to the number of the inputs and does not depend on the complexity of the performed LSB operations. We have validated our proposal in an Intel processor (Haswell architecture with AVX2 support) via fast Fourier transforms, circular convolutions, and matrix multiplication operations. Our analysis and experiments reveal that the proposed approach incurs between $0.03\%$ to $7\%$ reduction in processing throughput for a wide variety of LSB operations. This overhead is 5 to 1000 times smaller than that of the equivalent ABFT method that uses a checksum stream. Thus, our proposal can be used in fault-generating processor hardware or safety-critical applications, where high reliability is required without the cost of ABFT or modular redundancy.Comment: to appear in IEEE Trans. on Signal Processing, 201

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

Failure Mitigation in Linear, Sesquilinear and Bijective Operations On Integer Data Streams Via Numerical Entanglement

A new roll-forward technique is proposed that recovers from any single fail-stop failure in $M$ integer data streams ($M\geq3$) when undergoing linear, sesquilinear or bijective (LSB) operations, such as: scaling, additions/subtractions, inner or outer vector products and permutations. In the proposed approach, the $M$ input integer data streams are linearly superimposed to form $M$ numerically entangled integer data streams that are stored in-place of the original inputs. A series of LSB operations can then be performed directly using these entangled data streams. The output results can be extracted from any $M-1$ entangled output streams by additions and arithmetic shifts, thereby guaranteeing robustness to a fail-stop failure in any single stream computation. Importantly, unlike other methods, the number of operations required for the entanglement, extraction and recovery of the results is linearly related to the number of the inputs and does not depend on the complexity of the performed LSB operations. We have validated our proposal in an Intel processor (Haswell architecture with AVX2 support) via convolution operations. Our analysis and experiments reveal that the proposed approach incurs only $1.8\%$ to $2.8\%$ reduction in processing throughput in comparison to the failure-intolerant approach. This overhead is 9 to 14 times smaller than that of the equivalent checksum-based method. Thus, our proposal can be used in distributed systems and unreliable processor hardware, or safety-critical applications, where robustness against fail-stop failures becomes a necessity.Comment: Proc. 21st IEEE International On-Line Testing Symposium (IOLTS 2015), July 2015, Halkidiki, Greec

Optimizing Lossy Compression Rate-Distortion from Automatic Online Selection between SZ and ZFP

With ever-increasing volumes of scientific data produced by HPC applications, significantly reducing data size is critical because of limited capacity of storage space and potential bottlenecks on I/O or networks in writing/reading or transferring data. SZ and ZFP are the two leading lossy compressors available to compress scientific data sets. However, their performance is not consistent across different data sets and across different fields of some data sets: for some fields SZ provides better compression performance, while other fields are better compressed with ZFP. This situation raises the need for an automatic online (during compression) selection between SZ and ZFP, with a minimal overhead. In this paper, the automatic selection optimizes the rate-distortion, an important statistical quality metric based on the signal-to-noise ratio. To optimize for rate-distortion, we investigate the principles of SZ and ZFP. We then propose an efficient online, low-overhead selection algorithm that predicts the compression quality accurately for two compressors in early processing stages and selects the best-fit compressor for each data field. We implement the selection algorithm into an open-source library, and we evaluate the effectiveness of our proposed solution against plain SZ and ZFP in a parallel environment with 1,024 cores. Evaluation results on three data sets representing about 100 fields show that our selection algorithm improves the compression ratio up to 70% with the same level of data distortion because of very accurate selection (around 99%) of the best-fit compressor, with little overhead (less than 7% in the experiments).Comment: 14 pages, 9 figures, first revisio