9,388 research outputs found
MIRAI Architecture for Heterogeneous Network
One of the keywords that describe next-generation wireless communications is "seamless." As part of the e-Japan Plan promoted by the Japanese Government, the Multimedia Integrated Network by Radio Access Innovation project has as its goal the development of new technologies to enable seamless integration of various wireless access systems for practical use by 2005. This article describes a heterogeneous network architecture including a common tool, a common platform, and a common access. In particular, software-defined radio technologies are used to develop a multiservice user terminal to access different wireless networks. The common platform for various wireless networks is based on a wireless-supporting IPv6 network. A basic access network, separated from other wireless access networks, is used as a means for wireless system discovery, signaling, and paging. A proof-of-concept experimental demonstration system is available
A Survey on Handover Management in Mobility Architectures
This work presents a comprehensive and structured taxonomy of available
techniques for managing the handover process in mobility architectures.
Representative works from the existing literature have been divided into
appropriate categories, based on their ability to support horizontal handovers,
vertical handovers and multihoming. We describe approaches designed to work on
the current Internet (i.e. IPv4-based networks), as well as those that have
been devised for the "future" Internet (e.g. IPv6-based networks and
extensions). Quantitative measures and qualitative indicators are also
presented and used to evaluate and compare the examined approaches. This
critical review provides some valuable guidelines and suggestions for designing
and developing mobility architectures, including some practical expedients
(e.g. those required in the current Internet environment), aimed to cope with
the presence of NAT/firewalls and to provide support to legacy systems and
several communication protocols working at the application layer
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications
The millimeter wave (mmWave) frequencies offer the potential of orders of
magnitude increases in capacity for next-generation cellular systems. However,
links in mmWave networks are susceptible to blockage and may suffer from rapid
variations in quality. Connectivity to multiple cells - at mmWave and/or
traditional frequencies - is considered essential for robust communication. One
of the challenges in supporting multi-connectivity in mmWaves is the
requirement for the network to track the direction of each link in addition to
its power and timing. To address this challenge, we implement a novel uplink
measurement system that, with the joint help of a local coordinator operating
in the legacy band, guarantees continuous monitoring of the channel propagation
conditions and allows for the design of efficient control plane applications,
including handover, beam tracking and initial access. We show that an
uplink-based multi-connectivity approach enables less consuming, better
performing, faster and more stable cell selection and scheduling decisions with
respect to a traditional downlink-based standalone scheme. Moreover, we argue
that the presented framework guarantees (i) efficient tracking of the user in
the presence of the channel dynamics expected at mmWaves, and (ii) fast
reaction to situations in which the primary propagation path is blocked or not
available.Comment: Submitted for publication in IEEE Transactions on Wireless
Communications (TWC
- …