VirtFogSim: A parallel toolbox for dynamic energy-delay performance testing and optimization of 5G Mobile-Fog-Cloud virtualized platforms

It is expected that the pervasive deployment of multi-tier 5G-supported Mobile-Fog-Cloudtechnological computing platforms will constitute an effective means to support the real-time execution of future Internet applications by resource- and energy-limited mobile devices. Increasing interest in this emerging networking-computing technology demands the optimization and performance evaluation of several parts of the underlying infrastructures. However, field trials are challenging due to their operational costs, and in every case, the obtained results could be difficult to repeat and customize. These emergingMobile-Fog-Cloud ecosystems still lack, indeed, customizable software tools for the performance simulation of their computing-networking building blocks. Motivated by these considerations, in this contribution, we present VirtFogSim. It is aMATLAB-supported software toolbox that allows the dynamic joint optimization and tracking of the energy and delay performance of Mobile-Fog-Cloud systems for the execution of applications described by general Directed Application Graphs (DAGs). In a nutshell, the main peculiar features of the proposed VirtFogSim toolbox are that: (i) it allows the joint dynamic energy-aware optimization of the placement of the application tasks and the allocation of the needed computing-networking resources under hard constraints on acceptable overall execution times, (ii) it allows the repeatable and customizable simulation of the resulting energy-delay performance of the overall system; (iii) it allows the dynamic tracking of the performed resource allocation under time-varying operational environments, as those typically featuring mobile applications; (iv) it is equipped with a user-friendly Graphic User Interface (GUI) that supports a number of graphic formats for data rendering, and (v) itsMATLAB code is optimized for running atop multi-core parallel execution platforms. To check both the actual optimization and scalability capabilities of the VirtFogSim toolbox, a number of experimental setups featuring different use cases and operational environments are simulated, and their performances are compared

Spacelab mission dependent training parametric resource requirements study

Training flows were developed for typical missions, resource relationships analyzed, and scheduling optimization algorithms defined. Parametric analyses were performed to study the effect of potential changes in mission model, mission complexity and training time required on the resource quantities required to support training of payload or mission specialists. Typical results of these analyses are presented both in graphic and tabular form

User's manual for MacPASCO

A user's manual is presented for MacPASCO, which is an interactive, graphic, preprocessor for panel design. MacPASCO creates input for PASCO, an existing computer code for structural analysis and sizing of longitudinally stiffened composite panels. MacPASCO provides a graphical user interface which simplifies the specification of panel geometry and reduces user input errors. The user draws the initial structural geometry and reduces user input errors. The user draws the initial structural geometry on the computer screen, then uses a combination of graphic and text inputs to: refine the structural geometry; specify information required for analysis such as panel load and boundary conditions; and define design variables and constraints for minimum mass optimization. Only the use of MacPASCO is described, since the use of PASCO has been documented elsewhere

Precoat filtration with body-feed and variable pressure. Part I: Mathematical modelling

The precoat filtration with body-feed is an unit operation of agricultural and food engineering. Mostly it is implemented by using centrifugal pump, which pump curve has a partial horizontal trend. Classically, in filtration theory, this prerogative of the centrifugal pumps leads to the simplifying assumption that filtration occurs with constant pressure. Because of this, it is easy to integrate the Darcy\u2019s differential equation [1, 2 and 3] for the precoat filtration with body-feed, obtaining the well known Carman equation [4]. This is the equation which relates the filtration time with the filtrate volume, the operating pressure, the filter area, and the solid-liquid suspension characteristics. The Carman equation is the start point for the subsequent optimization of the filtration cycles, e.g. by establishing the relationship between the filtration time and the filter cleaning time [5]. A better optimization of the precoat filtration with body-feed could be obtain, with some economic benefits, if an integration of the Darcy ODE was developed starting from actual trend of the pressure produced by the centrifugal pump, that is if a variable pressure was considered, as expected from the pump curve. In this sense a proposal was done by Tiller and Crump [6] many years ago in accordance with a graphic method of integration of the Darcy ODE. However the graphic procedure is tedious since it is iterative and not computerizable. For this reason the aim of this work was to find an analytical solution to the Darcy ODE for the filtration with variable pressure in order to obtain a quick and easy-to-use equation for the subsequent optimization calculations of filtration cycles, even if more complex of the Carman equation

Multi-Criteria Optimal Planning for Energy Policies in CLP

In the policy making process a number of disparate and diverse issues such as economic development, environmental aspects, as well as the social acceptance of the policy, need to be considered. A single person might not have all the required expertises, and decision support systems featuring optimization components can help to assess policies. Leveraging on previous work on Strategic Environmental Assessment, we developed a fully-fledged system that is able to provide optimal plans with respect to a given objective, to perform multi-objective optimization and provide sets of Pareto optimal plans, and to visually compare them. Each plan is environmentally assessed and its footprint is evaluated. The heart of the system is an application developed in a popular Constraint Logic Programming system on the Reals sort. It has been equipped with a web service module that can be queried through standard interfaces, and an intuitive graphic user interface.Comment: Accepted at ICLP2014 Conference as Technical Communication, due to appear in Theory and Practice of Logic Programming (TPLP

ADAPTS: An Intelligent Sustainable Conceptual Framework for Engineering Projects

This paper presents a conceptual framework for the optimization of environmental sustainability in engineering projects, both for products and industrial facilities or processes. The main objective of this work is to propose a conceptual framework to help researchers to approach optimization under the criteria of sustainability of engineering projects, making use of current Machine Learning techniques. For the development of this conceptual framework, a bibliographic search has been carried out on the Web of Science. From the selected documents and through a hermeneutic procedure the texts have been analyzed and the conceptual framework has been carried out. A graphic representation pyramid shape is shown to clearly define the variables of the proposed conceptual framework and their relationships. The conceptual framework consists of 5 dimensions; its acronym is ADAPTS. In the base are: (1) the Application to which it is intended, (2) the available DAta, (3) the APproach under which it is operated, and (4) the machine learning Tool used. At the top of the pyramid, (5) the necessary Sensing. A study case is proposed to show its applicability. This work is part of a broader line of research, in terms of optimization under sustainability criteria.Telefónica Chair “Intelligence in Networks” of the University of Seville (Spain

Design for Additive Manufacturing of Conformal Cooling Channels Using Thermal-Fluid Topology Optimization and Application in Injection Molds

Additive manufacturing allows the fabrication parts and tools of high complexity. This capability challenges traditional guidelines in the design of conformal cooling systems in heat exchangers, injection molds, and other parts and tools. Innovative design methods, such as network-based approaches, lattice structures, and structural topology optimization have been used to generate complex and highly efficient cooling systems; however, methods that incorporate coupled thermal and fluid analysis remain scarce. This paper introduces a coupled thermal-fluid topology optimization algorithm for the design of conformal cooling channels. With this method, the channel position problem is replaced to a material distribution problem. The material distribution directly depends on the effect of flow resistance, heat conduction, as well as forced and natural convection. The problem is formulated based on a coupling of Navier-Stokes equations and convection-diffusion equation. The problem is solved by gradient-based optimization after analytical sensitivity derived using the adjoint method. The algorithm leads a two -dimensional conceptual design having optimal heat transfer and balanced flow. The conceptual design is converted to three-dimensional channels and mapped to a morphological surface conformal to the injected part. The method is applied to design an optimal conformal cooling for a real three dimensional injection mold. The feasibility of the final designs is verified through simulations. The final designs can be exported as both three-dimensional graphic and surface mesh CAD format, bringing the manufacture department the convenience to run the tool path for final fitting