Globally Monotonic Tracking Control of Multivariable Systems

© 1963-2012 IEEE. In this technical note we present a method for designing a linear time invariant (LTI) state-feedback controller to monotonically track a step reference at any desired rate of convergence for any initial condition. This method is developed for multi-input multi-output (MIMO) systems, and can be applied to strictly/nonstrictly proper systems, and also minimum/nonminimum-phase systems. This framework shows that for MIMO systems the objectives of achieving a rapid settling time, while at the same time avoiding overshoot/undershoot, are not always competing objectives

The design of nonovershooting and nonundershooting multivariable state feedback tracking controllers

We consider the use of linear multivariable feedback control to achieve a nonovershooting and nonundershooting step response. Recently, Schmid and Ntogramatzidis (2010) [13] introduced a linear state feedback controller design method to avoid overshoot. In this paper, we describe conditions under which the design method may be modified to avoid undershoot. The method is applicable to square and nonsquare systems, minimum and nonminimum phase systems, and also strictly proper and bi-proper systems

Controlled switching in Kalman filtering and iterative learning controls

“Switching is not an uncommon phenomenon in practical systems and processes, for examples, power switches opening and closing, transmissions lifting from low gear to high gear, and air planes crossing different layers in air. Switching can be a disaster to a system since frequent switching between two asymptotically stable subsystems may result in unstable dynamics. On the contrary, switching can be a benefit to a system since controlled switching is sometimes imposed by the designers to achieve desired performance. This encourages the study of system dynamics and performance when undesired switching occurs or controlled switching is imposed. In this research, the controlled switching is applied to an estimation process and a multivariable Iterative Learning Control (ILC) system, and system stability as well as system performance under switching are investigated. The first article develops a controlled switching strategy for the estimation of a temporal shift in a Laser Tracker (LT). For some reason, the shift cannot be measured at all time. Therefore, a model-based predictor is adopted for estimation when the measurement is not available, and a Kalman Filter (KF) is used to update the estimate when the measurement is available. With the proposed method, the estimation uncertainty is always bounded within two predefined boundaries. The second article develops a controlled switching method for multivariable ILC systems where only partial outputs are measured at a time. Zero tracking error cannot be achieved for such systems using standard ILC due to incomplete knowledge of the outputs. With the developed controlled switching, all the outputs are measured in a sequential order, and, with each currently-measured output, the standard ILC is executed. Conditions under which zero convergent tracking error is accomplished with the proposed method are investigated. The proposed method is finally applied to solving a multi-agent coordination problem”--Abstract, page iv

Nonovershooting and nonundershooting exact output regulation

We consider the classic problem of exact output regulation for a linear time invariant plant. Under the assumption that either a state feedback or measurement feedback output regulator exists, we give design methods to obtain a regulator that avoids overshoot and undershoot in the transient response

Analytical results for the multi-objective design of model-predictive control

In model-predictive control (MPC), achieving the best closed-loop performance under a given computational resource is the underlying design consideration. This paper analyzes the MPC design problem with control performance and required computational resource as competing design objectives. The proposed multi-objective design of MPC (MOD-MPC) approach extends current methods that treat control performance and the computational resource separately -- often with the latter as a fixed constraint -- which requires the implementation hardware to be known a priori. The proposed approach focuses on the tuning of structural MPC parameters, namely sampling time and prediction horizon length, to produce a set of optimal choices available to the practitioner. The posed design problem is then analyzed to reveal key properties, including smoothness of the design objectives and parameter bounds, and establish certain validated guarantees. Founded on these properties, necessary and sufficient conditions for an effective and efficient solver are presented, leading to a specialized multi-objective optimizer for the MOD-MPC being proposed. Finally, two real-world control problems are used to illustrate the results of the design approach and importance of the developed conditions for an effective solver of the MOD-MPC problem

Kuhn-Tucker-based stability conditions for systems with saturation

This paper presents a new approach to deriving stability conditions for continuous-time linear systems interconnected with a saturation. The method presented can be extended to handle a dead-zone, or in general, nonlinearities in the form of piecewise linear functions. By representing the saturation as a constrained optimization problem, the necessary (Kuhn-Tucker) conditions for optimality are used to derive linear and quadratic constraints which characterize the saturation. After selecting a candidate Lyapunov function, we pose the question of whether the Lyapunov function is decreasing along trajectories of the system as an implication between the necessary conditions derived from the saturation optimization, and the time derivative of the Lyapunov function. This leads to stability conditions in terms of linear matrix inequalities, which are obtained by an application of the S-procedure to the implication. An example is provided where the proposed technique is compared and contrasted with previous analysis methods

Model Predictive Control: Multivariable Control Technique of Choice in the 1990s?

The state space and input/output formulations of model predictive control are compared and preference is given to the former because of the industrial interest in multivariable constrained problems. Recently, by abandoning the assumption of a finite output horizon several researchers have derived powerful stability results for linear and nonlinear systems with and without constraints, for the nominal case and in the presence of model uncertainty. Some of these results are reviewed. Optimistic speculations about the future of MPC conclude the paper