Design of parameter-scheduled state-feedback controllers using shifting specifications

In this paper,the problem of designing aparameter-scheduled state-feedback controller is investigated. The paper presents an extension of the classical regional pole placement, H2 control and H1 control problems, so as to satisfy new specifications, that will be referred to as shifting pole placement control, shifting H2 control and shifting H1 control, respectively. By introducing some parameters, or using the existing ones, the controller can be designed in such away that different values of the separameters imply different regions where the closed-loop poles are situated, or different performances in the H2 or H1 sense. The proposed approach is derived within the so-called Lyapunov Shaping Paradigm, where a single quadratic Lyapunov function is used for ensuring stability and desired performances in spite of arbitrary parameter time variation. The problem is analyzed in the continuous-time LPV case, oventhough the developed theory could be applied to LTI systems in cases when it is desired to vary the control system performances online. Results obtained in simulation demonstrate the effectiveness and the relevant features of the proposed approach.Peer ReviewedPostprint (published version

Integrated fault estimation and accommodation design for discrete-time Takagi-Sugeno fuzzy systems with actuator faults

This paper addresses the problem of integrated robust fault estimation (FE) and accommodation for discrete-time Takagi–Sugeno (T–S) fuzzy systems. First, a multiconstrained reduced-order FE observer (RFEO) is proposed to achieve FE for discrete-time T–S fuzzy models with actuator faults. Based on the RFEO, a new fault estimator is constructed. Then, using the information of online FE, a new approach for fault accommodation based on fuzzy-dynamic output feedback is designed to compensate for the effect of faults by stabilizing the closed-loop systems. Moreover, the RFEO and the dynamic output feedback fault-tolerant controller are designed separately, such that their design parameters can be calculated readily. Simulation results are presented to illustrate our contributions

Nonlinear modelling and optimal control via Takagi-Sugeno fuzzy techniques: A quadrotor stabilization

Using the principles of Takagi-Sugeno fuzzy modelling allows the integration of flexible fuzzy approaches and rigorous mathematical tools of linear system theory into one common framework. The rule-based T-S fuzzy model splits a nonlinear system into several linear subsystems. Parallel Distributed Compensation (PDC) controller synthesis uses these T-S fuzzy model rules. The resulting fuzzy controller is nonlinear, based on fuzzy aggregation of state controllers of individual linear subsystems. The system is optimized by the linear quadratic control (LQC) method, its stability is analysed using the Lyapunov method. Stability conditions are guaranteed by a system of linear matrix inequalities (LMIs) formulated and solved for the closed loop system with the proposed PDC controller. The additional GA optimization procedure is introduced, and a new type of its fitness function is proposed to improve the closed-loop system performance.Web of Science71110

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

D-stable controller design for Lipschitz NLPV system

This paper addresses the design of a state-feedback controller for a class of nonlinear parameter varying (NLPV) systems in which the nonlinearity can be expressed as a parameter-varying Lipschitz term. The controller is designed to satisfy a D-stability specification, which is akin to imposing constraints on the closed-loop pole location in the case of LTI and LPV systems. The design conditions, obtained using a quadratic Lyapunov function, are eventually expressed in terms of linear matrix inequalities (LMIs), which can be solved efficiently using available solvers. The effectiveness of the proposed method is demonstrated by means of a numerical example.Postprint (author's final draft

LMI-based design of state-feedback controllers for pole clustering of LPV systems in a union of DR-regions

This paper introduces an approach for the design of a state-feedback controller that achieves pole clustering in a union of DR-regions for linear parameter varying systems. The design conditions, obtained using a partial pole placement theorem, are eventually expressed in terms of linear matrix inequalities. In addition, it is shown that the approach can be modified in a shifting sense. Hence, the controller gain is computed such that different values of the varying parameters imply different regions of the complex plane where the closed-loop poles are situated. This approach enables the online modification of the closed-loop performance. The effectiveness of the proposed method is demonstrated by means of simulations.acceptedVersio

LMI-based design of state-feedback controllers for pole clustering of LPV systems in a union of -regions

This paper introduces an approach for the design of a state-feedback controller that achieves pole clustering in a union of DR-regions for linear parameter varying systems. The design conditions, obtained using a partial pole placement theorem, are eventually expressed in terms of linear matrix inequalities. In addition, it is shown that the approach can be modified in a shifting sense. Hence, the controller gain is computed such that different values of the varying parameters imply different regions of the complex plane where the closed-loop poles are situated. This approach enables the online modification of the closed-loop performance. The effectiveness of the proposed method is demonstrated by means of simulations.Peer ReviewedPostprint (author's final draft

Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation

All real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller’s design to prevent a possibly severe deterioration of the system’s performance, and may even lead to instability of the closed-loop system. Contrarily to most of the control strategies, which assume that the saturation limits are constant in time, this paper considers the problem of designing a state-feedback controller for a system affected by time-varying saturation limits with the objective to improve the performance. In order to tie variations of the saturation function to changes in the performance of the closed-loop system, the shifting paradigm is used, that is, some parameters scheduled by the time-varying saturations are introduced to schedule the performance criterion, which is considered to be the instantaneous guaranteed decay rate. The design conditions are obtained within the framework of linear parameter varying (LPV) systems using quadratic Lyapunov functions with constant Lyapunov matrices and they consist in a linear matrix inequality (LMI)-based feasibility problem, which can be solved efficiently using available solvers. Simulation results obtained using an illustrative example demonstrate the validity and the main characteristics of the proposed approach.Peer ReviewedPostprint (published version

Robust Anti-Windup Control Considering Multiple Design Objectives

A new saturation control technique is proposed to design multiobjective and robust anti-windup controllers for linear systems with input saturations. Based on the characterization of saturation nonlinearities and modeling uncertainties via integral quadratic constraints (IQCs), this method considers a mixed H2/H∞ performance indexes while maintaining dynamic constraints on the controller. The analysis and synthesis conditions are presented in terms of scaled linear matrix inequalities (LMIs). The proposed control algorithm can improve the performance of the input-constrained system while also guaranteeing robustness with respect to the modeling uncertainties. Finally, a numerical example is given to illustrate the effectiveness of the developed techniques