179 research outputs found
Mitigation of artifacts due to isolated acoustic heterogeneities in photoacoustic computed tomography using a variable data truncation-based reconstruction method
Photoacoustic computed tomography (PACT) is an emerging computed imaging
modality that exploits optical contrast and ultrasonic detection principles to
form images of the absorbed optical energy density within tissue. If the object
possesses spatially variant acoustic properties that are unaccounted for by the
reconstruction method, the estimated image can contain distortions. While
reconstruction methods have recently been developed to compensate for this
effect, they generally require the object's acoustic properties to be known a
priori. To circumvent the need for detailed information regarding an object's
acoustic properties, we previously proposed a half-time reconstruction method
for PACT. A half-time reconstruction method estimates the PACT image from a
data set that has been temporally truncated to exclude the data components that
have been strongly aberrated. However, this method can be improved upon when
the approximate sizes and locations of isolated heterogeneous structures, such
as bones or gas pockets, are known. To address this, we investigate PACT
reconstruction methods that are based on a variable data truncation (VDT)
approach. The VDT approach represents a generalization of the half-time
approach, in which the degree of temporal truncation for each measurement is
determined by the distance between the corresponding ultrasonic transducer
location and the nearest known bone or gas void location. Computer-simulated
and experimental data are employed to demonstrate the effectiveness of the
approach in mitigating artifacts due to acoustic heterogeneities
Imaging of high-intensity focused ultrasound-induced lesions in soft biological tissue using thermoacoustic tomography
An imaging technology, thermoacoustic tomograpy (TAT), was applied to the visualization of high-intensity focused ultrasound (HIFU)-induced lesions. A single, spherically focused ultrasonic transducer, operating at a central frequency of approximately 4 MHz, was used to generate a HIFU field in fresh porcine muscle.Microwave pulses from a 3-GHz microwave generator were then employed to generate thermoacoustic sources in this tissue sample. The thermoacoustic signals were detected by an unfocused ultrasonic transducer that was scanned around the sample. To emphasize the boundaries between the lesion and its surrounding tissue, a local-tomography-type reconstruction method was applied to reconstruct the TAT images of the lesions. Good contrast was obtained between the lesion and the tissue surrounding it. Gross pathologic photographs of the tissue samples confirmed the TAT images.This work demonstrates that TAT may potentially be used to image HIFU-induced lesions in biological tissues
Photoacoustic tomography and sensing in biomedicine
Photoacoustics has been broadly studied in biomedicine, for both human and small animal tissues. Photoacoustics uniquely combines the absorption contrast of light or radio frequency waves with ultrasound resolution. Moreover, it is non-ionizing and non-invasive, and is the fastest growing new biomedical method, with clinical applications on the way. This review provides a brief recap of recent developments in photoacoustics in biomedicine, from basic principles to applications. The emphasized areas include the new imaging modalities, hybrid detection methods, photoacoustic contrast agents and the photoacoustic Doppler effect, as well as translational research topics
Inverse solution of thermoacoustic wave equation for cylindrical layered media
Thermoacoustic imaging is a crossbred approach taking advantages of electromagnetic and ultrasound disciplines, together. A significant number of current medical imaging strategies are based on reconstruction of source distribution from information collected by sensors over a surface covering the region to be imaged. Reconstruction in thermoacoustic imaging depends on the inverse solution of thermoacoustic wave equation. Homogeneous assumption of tissue to be imaged results in degradation of image quality. In our paper, inverse solution of the thermoacoustic wave equation using layered tissue model consisting of concentric annular layers on a cylindrical cross-section is investigated for cross-sectional thermoacustic imaging of breast and brain. By using Green’s functions and surface integral methods we derive an exact analytic inverse solution of thermoacoustic wave equation in frequency domain. Our inverse solution is an extension of conventional solution to layered cylindrical structures. By carrying out simulations, using numerical test phantoms consisting of thermoacoustic sources distributed in the layered model, our layered medium assumption solution was tested and benchmarked with conventional solutions based on homogeneous medium assumption in frequency domain. In thermoacoustic image reconstruction, where the medium is assumed as homogeneous medium, the solution of nonhomogeneous thermoacoustic wave equation results in geometrical distortions, artifacts and reduced image resolution due to inconvenient medium assumptions
Challenges in the Design of Microwave Imaging Systems for Breast Cancer Detection
Among the various breast imaging modalities for breast cancer detection, microwave imaging is attractive due to the high contrast in dielectric properties between the cancerous and normal tissue. Due to this reason, this modality has received a significant interest and attention from the microwave community. This paper presents the survey of the ongoing research in the field of microwave imaging of biological tissues, with major focus on the breast tumor detection application. The existing microwave imaging systems are categorized on the basis of the employed measurement concepts. The advantages and disadvantages of the implemented imaging techniques are discussed. The fundamental tradeoffs between the various system requirements are indicated. Some strategies to overcome these limitations are outlined
On the Adjoint Operator in Photoacoustic Tomography
Photoacoustic Tomography (PAT) is an emerging biomedical "imaging from
coupled physics" technique, in which the image contrast is due to optical
absorption, but the information is carried to the surface of the tissue as
ultrasound pulses. Many algorithms and formulae for PAT image reconstruction
have been proposed for the case when a complete data set is available. In many
practical imaging scenarios, however, it is not possible to obtain the full
data, or the data may be sub-sampled for faster data acquisition. In such
cases, image reconstruction algorithms that can incorporate prior knowledge to
ameliorate the loss of data are required. Hence, recently there has been an
increased interest in using variational image reconstruction. A crucial
ingredient for the application of these techniques is the adjoint of the PAT
forward operator, which is described in this article from physical, theoretical
and numerical perspectives. First, a simple mathematical derivation of the
adjoint of the PAT forward operator in the continuous framework is presented.
Then, an efficient numerical implementation of the adjoint using a k-space time
domain wave propagation model is described and illustrated in the context of
variational PAT image reconstruction, on both 2D and 3D examples including
inhomogeneous sound speed. The principal advantage of this analytical adjoint
over an algebraic adjoint (obtained by taking the direct adjoint of the
particular numerical forward scheme used) is that it can be implemented using
currently available fast wave propagation solvers.Comment: submitted to "Inverse Problems
- …