2,127 research outputs found
Random Access in Uplink Massive MIMO Systems: How to exploit asynchronicity and excess antennas
Massive MIMO systems, where the base stations are equipped with hundreds of
antennas, are an attractive way to handle the rapid growth of data traffic. As
the number of users increases, the initial access and handover in contemporary
networks will be flooded by user collisions. In this work, we propose a random
access procedure that resolves collisions and also performs timing, channel,
and power estimation by simply utilizing the large number of antennas
envisioned in massive MIMO systems and the inherent timing misalignments of
uplink signals during network access and handover. Numerical results are used
to validate the performance of the proposed solution under different settings.
It turns out that the proposed solution can detect all collisions with a
probability higher than 90%, at the same time providing reliable timing and
channel estimates. Moreover, numerical results demonstrate that it is robust to
overloaded situations.Comment: submitted to IEEE Globecom 2016, Washington, DC US
Ubiquitous Cell-Free Massive MIMO Communications
Since the first cellular networks were trialled in the 1970s, we have
witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic
growth has been managed by a combination of wider bandwidths, refined radio
interfaces, and network densification, namely increasing the number of antennas
per site. Due its cost-efficiency, the latter has contributed the most. Massive
MIMO (multiple-input multiple-output) is a key 5G technology that uses massive
antenna arrays to provide a very high beamforming gain and spatially
multiplexing of users, and hence, increases the spectral and energy efficiency.
It constitutes a centralized solution to densify a network, and its performance
is limited by the inter-cell interference inherent in its cell-centric design.
Conversely, ubiquitous cell-free Massive MIMO refers to a distributed Massive
MIMO system implementing coherent user-centric transmission to overcome the
inter-cell interference limitation in cellular networks and provide additional
macro-diversity. These features, combined with the system scalability inherent
in the Massive MIMO design, distinguishes ubiquitous cell-free Massive MIMO
from prior coordinated distributed wireless systems. In this article, we
investigate the enormous potential of this promising technology while
addressing practical deployment issues to deal with the increased
back/front-hauling overhead deriving from the signal co-processing.Comment: Published in EURASIP Journal on Wireless Communications and
Networking on August 5, 201
mmWave Massive MIMO with Simple RF and Appropriate DSP
There is considerable interest in the combined use of millimeter-wave
(mmwave) frequencies and arrays of massive numbers of antennas (massive MIMO)
for next-generation wireless communications systems. A symbiotic relationship
exists between these two factors: mmwave frequencies allow for densely packed
antenna arrays, and hence massive MIMO can be achieved with a small form
factor; low per-antenna SNR and shadowing can be overcome with a large array
gain; steering narrow beams or nulls with a large array is a good match for the
line-of-sight (LOS) or near-LOS mmwave propagation environments, etc.. However,
the cost and power consumption for standard implementations of massive MIMO
arrays at mmwave frequencies is a significant drawback to rapid adoption and
deployment. In this paper, we examine a number of possible approaches to reduce
cost and power at both the basestation and user terminal, making up for it with
signal processing and additional (cheap) antennas. These approaches include
lowresolution Analog-to-Digital Converters (ADCs), wireless local oscillator
distribution networks, spatial multiplexing and multistreaming instead of
higher-order modulation etc.. We will examine the potential of these approaches
in making mmwave massive MIMO a reality and discuss the requirements in terms
of digital signal processing (DSP).Comment: published in Asilomar 201
Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions
Massive MIMO is a compelling wireless access concept that relies on the use
of an excess number of base-station antennas, relative to the number of active
terminals. This technology is a main component of 5G New Radio (NR) and
addresses all important requirements of future wireless standards: a great
capacity increase, the support of many simultaneous users, and improvement in
energy efficiency. Massive MIMO requires the simultaneous processing of signals
from many antenna chains, and computational operations on large matrices. The
complexity of the digital processing has been viewed as a fundamental obstacle
to the feasibility of Massive MIMO in the past. Recent advances on
system-algorithm-hardware co-design have led to extremely energy-efficient
implementations. These exploit opportunities in deeply-scaled silicon
technologies and perform partly distributed processing to cope with the
bottlenecks encountered in the interconnection of many signals. For example,
prototype ASIC implementations have demonstrated zero-forcing precoding in real
time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing
of 8 terminals). Coarse and even error-prone digital processing in the antenna
paths permits a reduction of consumption with a factor of 2 to 5. This article
summarizes the fundamental technical contributions to efficient digital signal
processing for Massive MIMO. The opportunities and constraints on operating on
low-complexity RF and analog hardware chains are clarified. It illustrates how
terminals can benefit from improved energy efficiency. The status of technology
and real-life prototypes discussed. Open challenges and directions for future
research are suggested.Comment: submitted to IEEE transactions on signal processin
- …