1,721 research outputs found

    Examples of user algorithms implementing ARAIM techniques for integrity performance prediction, procedures development and pre-flight operations

    Get PDF
    Advanced Receiver Autonomous Integrity Monitoring (ARAIM) is a new Aircraft Based Augmentation System (ABAS) technique, firstly presented in the two reports of the GNSS Evolutionary Architecture Study (GEAS). The ARAIM technique offers the opportunity to enable GNSS receivers to serve as a primary means of navigation, worldwide, for precision approach down to LPV-200 operation, while at the same time potentially reducing the support which has to be provided by Ground and Satellite Based Augmented Systems (GBAS and SBAS)

    Avionics-based GNSS integrity augmentation for unmanned aerial systems sense-and-avoid

    Get PDF
    This paper investigates the synergies between a GNSS Avionics Based Integrity Augmentation (ABIA) system and a novel Unmanned Aerial System (UAS) Sense-and-Avoid (SAA) architecture for cooperative and non-cooperative scenarios. The integration of ABIA with SAA has the potential to provide an integrity-augmented SAA solution that will allow the safe and unrestricted access of UAS to commercial airspace. The candidate SAA system uses Forward-Looking Sensors (FLS) for the non-cooperative case and Automatic Dependent Surveillance-Broadcast (ADS-B) for the cooperative case. In the non-cooperative scenario, the system employs navigation-based image stabilization with image morphology operations and a multi-branch Viterbi filter for obstacle detection, which allows heading estimation. The system utilizes a Track-to-Track (T3) algorithm for data fusion that allows combining data from different tracks obtained with FLS and/or ADS-B depending on the scenario. Successively, it utilizes an Interacting Multiple Model (IMM) algorithm to estimate the state vector allowing a prediction of the intruder trajectory over a specified time horizon. Both in the cooperative and non-cooperative cases, the risk of collision is evaluated by setting a threshold on the Probability Density Function (PDF) of a Near Mid-Air Collision (NMAC) event over the separation area. So, if the specified threshold is exceeded, an avoidance manoeuver is performed based on a heading-based Differential Geometry (DG) algorithm and optimized utilizing a cost function with minimum time constraints and fuel penalty criteria weighted as a function of separation distance. Additionally, the optimised avoidance trajectory considers the constraints imposed by the ABIA in terms of GNSS constellation satellite elevation angles, preventing degradation or losses of navigation data during the whole SAA loop. This integration scheme allows real-time trajectory corrections to re-establish the Required Navigation Performance (RNP) when actual GNSS accuracy degradations and/or data losses take place (e.g., due to aircraft-satellite relative geometry, GNSS receiver tracking, interference, jamming or other external factors). Various simulation case studies were accomplished to evaluate the performance of this Integrity-Augmented SAA (IAS) architecture. The selected host platform was the AEROSONDE Unmanned Aerial Vehicle (UAV) and the simulation cases addressed a variety of cooperative and non-cooperative scenarios in a representative cross-section of the AEROSONDE operational flight envelope. The simulation results show that the proposed IAS architecture is an excellent candidate to perform high-integrity Collision Detection and Resolution (CD&R) utilizing GNSS as the primary source of navigation data, providing solid foundation for future research and developments in this domain

    Avionics-based GNSS integrity augmentation for unmanned aerial systems sense-and-avoid

    Get PDF
    This paper investigates the synergies between a GNSS Avionics Based Integrity Augmentation (ABIA) system and a novel Unmanned Aerial System (UAS) Sense-and-Avoid (SAA) architecture for cooperative and non-cooperative scenarios. The integration of ABIA with SAA has the potential to provide an integrity-augmented SAA solution that will allow the safe and unrestricted access of UAS to commercial airspace. The candidate SAA system uses Forward-Looking Sensors (FLS) for the non-cooperative case and Automatic Dependent Surveillance-Broadcast (ADS-B) for the cooperative case. In the non-cooperative scenario, the system employs navigation-based image stabilization with image morphology operations and a multi-branch Viterbi filter for obstacle detection, which allows heading estimation. The system utilizes a Track-to-Track (T3) algorithm for data fusion that allows combining data from different tracks obtained with FLS and/or ADS-B depending on the scenario. Successively, it utilizes an Interacting Multiple Model (IMM) algorithm to estimate the state vector allowing a prediction of the intruder trajectory over a specified time horizon. Both in the cooperative and non-cooperative cases, the risk of collision is evaluated by setting a threshold on the Probability Density Function (PDF) of a Near Mid-Air Collision (NMAC) event over the separation area. So, if the specified threshold is exceeded, an avoidance manoeuver is performed based on a heading-based Differential Geometry (DG) algorithm and optimized utilizing a cost function with minimum time constraints and fuel penalty criteria weighted as a function of separation distance. Additionally, the optimised avoidance trajectory considers the constraints imposed by the ABIA in terms of GNSS constellation satellite elevation angles, preventing degradation or losses of navigation data during the whole SAA loop. This integration scheme allows real-time trajectory corrections to re-establish the Required Navigation Performance (RNP) when actual GNSS accuracy degradations and/or data losses take place (e.g., due to aircraft-satellite relative geometry, GNSS receiver tracking, interference, jamming or other external factors). Various simulation case studies were accomplished to evaluate the performance of this Integrity-Augmented SAA (IAS) architecture. The selected host platform was the AEROSONDE Unmanned Aerial Vehicle (UAV) and the simulation cases addressed a variety of cooperative and non-cooperative scenarios in a representative cross-section of the AEROSONDE operational flight envelope. The simulation results show that the proposed IAS architecture is an excellent candidate to perform high-integrity Collision Detection and Resolution (CD&R) utilizing GNSS as the primary source of navigation data, providing solid foundation for future research and developments in this domain

    GNSS avionics-based integrity augmentation for RPAS detect-and-avoid applications

    Get PDF
    Taking the move from our recent research on GNSS Avionics Based Integrity Augmentation (ABIA), this article investigates the synergies of ABIA with a novel Detect-and-Avoid (DAA) architecture for Remotely Piloted Aircraft System (RPAS). Based on simulation and experimental data collected on a variety of manned and unmanned aircraft, it was observed that the integration of ABIA with DAA has the potential to provide an integrity-augmented DAA for both cooperative and non-cooperative applications. The candidate DAA system uses various Forward-Looking Sensors (FLS) for the non-cooperative case and Automatic Dependent Surveillance-Broadcast (ADS-B) in addition to TCAS/ASAS for the cooperative case. Both in the cooperative and non-cooperative cases, the risk of collision is evaluated by setting a threshold on the Probability Density Function (PDF) of a Near Mid-Air Collision (NMAC) event over the separation area. So, if the specified threshold is exceeded, an avoidance manoeuvre is performed based on a heading-based Differential Geometry (DG) algorithm and optimized utilizing a cost function with minimum time constraints and fuel penalty criteria weighted as a function of separation distance. Additionally, the optimised avoidance trajectory considers the constraints imposed by the ABIA in terms of RPAS platform dynamics and GNSS constellation satellite elevation angles, preventing degradation or losses of navigation data during the whole DAA loop. This integration scheme allows real-time trajectory corrections to re-establish the Required Navigation Performance (RNP) when actual GNSS accuracy degradations and/or data losses take place (e.g., due to aircraft-satellite relative geometry, GNSS receiver tracking, interference, jamming or other external factors). Cooperative and non-cooperative simulation case studies were accomplished to evaluate the performance of this Integrity-Augmented DAA (IAS) architecture. The selected host platform was the AEROSONDE RPAS and the simulation cases were performed in a representative cross-section of the RPAS operational flight envelope. The simulation results show that the proposed IAS architecture is capable of performing high-integrity conflict detection and resolution when GNSS is the primary source of navigation data

    GNSS avionics-based integrity augmentation for RPAS detect-and-avoid applications

    Get PDF
    Taking the move from our recent research on GNSS Avionics Based Integrity Augmentation (ABIA), this article investigates the synergies of ABIA with a novel Detect-and-Avoid (DAA) architecture for Remotely Piloted Aircraft System (RPAS). Based on simulation and experimental data collected on a variety of manned and unmanned aircraft, it was observed that the integration of ABIA with DAA has the potential to provide an integrity-augmented DAA for both cooperative and non-cooperative applications. The candidate DAA system uses various Forward-Looking Sensors (FLS) for the non-cooperative case and Automatic Dependent Surveillance-Broadcast (ADS-B) in addition to TCAS/ASAS for the cooperative case. Both in the cooperative and non-cooperative cases, the risk of collision is evaluated by setting a threshold on the Probability Density Function (PDF) of a Near Mid-Air Collision (NMAC) event over the separation area. So, if the specified threshold is exceeded, an avoidance manoeuvre is performed based on a heading-based Differential Geometry (DG) algorithm and optimized utilizing a cost function with minimum time constraints and fuel penalty criteria weighted as a function of separation distance. Additionally, the optimised avoidance trajectory considers the constraints imposed by the ABIA in terms of RPAS platform dynamics and GNSS constellation satellite elevation angles, preventing degradation or losses of navigation data during the whole DAA loop. This integration scheme allows real-time trajectory corrections to re-establish the Required Navigation Performance (RNP) when actual GNSS accuracy degradations and/or data losses take place (e.g., due to aircraft-satellite relative geometry, GNSS receiver tracking, interference, jamming or other external factors). Cooperative and non-cooperative simulation case studies were accomplished to evaluate the performance of this Integrity-Augmented DAA (IAS) architecture. The selected host platform was the AEROSONDE RPAS and the simulation cases were performed in a representative cross-section of the RPAS operational flight envelope. The simulation results show that the proposed IAS architecture is capable of performing high-integrity conflict detection and resolution when GNSS is the primary source of navigation data

    Aeronautical Engineering: A Continuing Bibliography with Indexes (supplement 194)

    Get PDF
    This bibliography lists 369 reports, articles and other documents introduced into the NASA scientific and technical information system in November 1985

    Model-based fault diagnosis for aerospace systems: a survey

    No full text
    http://pig.sagepub.com/content/early/2012/01/06/0954410011421717International audienceThis survey of model-based fault diagnosis focuses on those methods that are applicable to aerospace systems. To highlight the characteristics of aerospace models, generic nonlinear dynamical modeling from flight mechanics is recalled and a unifying representation of sensor and actuator faults is presented. An extensive bibliographical review supports a description of the key points of fault detection methods that rely on analytical redundancy. The approaches that best suit the constraints of the field are emphasized and recommendations for future developments in in-flight fault diagnosis are provided

    Joint University Program for Air Transportation Research, 1990-1991

    Get PDF
    The goals of this program are consistent with the interests of both NASA and the FAA in furthering the safety and efficiency of the National Airspace System. Research carried out at the Massachusetts Institute of Technology (MIT), Ohio University, and Princeton University are covered. Topics studied include passive infrared ice detection for helicopters, the cockpit display of hazardous windshear information, fault detection and isolation for multisensor navigation systems, neural networks for aircraft system identification, and intelligent failure tolerant control

    Cyber physical security of avionic systems

    Get PDF
    “Cyber-physical security is a significant concern for critical infrastructures. The exponential growth of cyber-physical systems (CPSs) and the strong inter-dependency between the cyber and physical components introduces integrity issues such as vulnerability to injecting malicious data and projecting fake sensor measurements. Traditional security models partition the CPS from a security perspective into just two domains: high and low. However, this absolute partition is not adequate to address the challenges in the current CPSs as they are composed of multiple overlapping partitions. Information flow properties are one of the significant classes of cyber-physical security methods that model how inputs of a system affect its outputs across the security partition. Information flow supports traceability that helps in detecting vulnerabilities and anomalous sources, as well as helps in rendering mitigation measures. To address the challenges associated with securing CPSs, two novel approaches are introduced by representing a CPS in terms of a graph structure. The first approach is an automated graph-based information flow model introduced to identify information flow paths in the avionics system and partition them into security domains. This approach is applied to selected aspects of the avionic systems to identify the vulnerabilities in case of a system failure or an attack and provide possible mitigation measures. The second approach is based on graph neural networks (GNN) to classify the graphs into different security domains. Using these two approaches, successful partitioning of the CPS into different security domains is possible in addition to identifying their optimal coverage. These approaches enable designers and engineers to ensure the integrity of the CPS. The engineers and operators can use this process during design-time and in real-time to identify failures or attacks on the system”--Abstract, page iii

    Robust Multi-sensor Data Fusion for Practical Unmanned Surface Vehicles (USVs) Navigation

    Get PDF
    The development of practical Unmanned Surface Vehicles (USVs) are attracting increasing attention driven by their assorted military and commercial application potential. However, addressing the uncertainties presented in practical navigational sensor measurements of an USV in maritime environment remain the main challenge of the development. This research aims to develop a multi-sensor data fusion system to autonomously provide an USV reliable navigational information on its own positions and headings as well as to detect dynamic target ships in the surrounding environment in a holistic fashion. A multi-sensor data fusion algorithm based on Unscented Kalman Filter (UKF) has been developed to generate more accurate estimations of USV’s navigational data considering practical environmental disturbances. A novel covariance matching adaptive estimation algorithm has been proposed to deal with the issues caused by unknown and varying sensor noise in practice to improve system robustness. Certain measures have been designed to determine the system reliability numerically, to recover USV trajectory during short term sensor signal loss, and to autonomously detect and discard permanently malfunctioned sensors, and thereby enabling potential sensor faults tolerance. The performance of the algorithms have been assessed by carrying out theoretical simulations as well as using experimental data collected from a real-world USV projected collaborated with Plymouth University. To increase the degree of autonomy of USVs in perceiving surrounding environments, target detection and prediction algorithms using an Automatic Identification System (AIS) in conjunction with a marine radar have been proposed to provide full detections of multiple dynamic targets in a wider coverage range, remedying the narrow detection range and sensor uncertainties of the AIS. The detection algorithms have been validated in simulations using practical environments with water current effects. The performance of developed multi-senor data fusion system in providing reliable navigational data and perceiving surrounding environment for USV navigation have been comprehensively demonstrated
    corecore