12,132 research outputs found

    Hierarchically structured biphenylene-bridged periodic mesoporous organosilica

    Get PDF
    Novel composites of highly ordered and stable biphenyl-bridged periodic mesoporous organosilica (PMO) materials confined within the pores of anodic alumina membranes (AAM) were successfully synthesized by evaporation-induced self-assembly (EISA). 4,40-Bis(triethoxysilyl)biphenyl (BTEBP) was used as a precursor in combination with the ionic surfactant cetyltrimethylammonium bromide (CTAB) or triblock-copolymer F127 as structure-directing agents. The resulting mesophases were characterized by small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). With ionic CTAB as a structure directing agent, samples with a mixture of the 2D-hexagonal columnar and a lamellar mesophase were obtained within the AAM channels. When using the nonionic surfactant F127, mesophases with a 2D-hexagonal circular structure were formed in the AAM channels. Additionally, a cubic Im3m phase could also be obtained with the same nonionic surfactant after the addition of lithium chloride to the precursor solution. The stability of both the circular and cubic biphenylene-bridged PMO against calcination temperatures of up to 250 °C was confirmed by NMR spectroscopy. Nitrogen sorption in the porous composite membrane shows typical type IV isotherms and narrow pore size distributions. All the biphenyl PMO/AAM composites show fluorescence due to the existence of biphenyl chromophores in the stable organosilica framework

    Effects of Liposomes Contained in Thermosensitive Hydrogels as Biomaterials Useful in Neural Tissue Engineering

    Get PDF
    Indexación: Scopus.Advances in the generation of suitable thermosensitive hydrogels for the delivery of cells in neural tissue engineering demonstrate a delicate relationship between physical properties and capabilities to promote cell proliferation and differentiation. To improve the properties of these materials, it is possible to add liposomes for the controlled release of bioactive elements, which in turn can affect the physical and biological properties of the hydrogels. In the present investigation, different hydrogels based on Pluronic F127 have been formulated with the incorporation of chitosan and two types of liposomes of two different sizes. The rheological and thermal properties and their relation with the neurite proliferation and growth of the PC12 cell line were evaluated. Our results show that the incorporation of liposomes modifies the properties of the hydrogels dependent on the concentration of chitosan and the lipid type in the liposomes, which directly affect the capabilities of the hydrogels to promote the viability and differentiation of PC12 cells. © 2017 by the authors.http://www.mdpi.com/1996-1944/10/10/112

    Biomass derived mesoporous carbon monoliths via an evaporation-induced self-assembly

    Get PDF
    Evaporation-induced self-assembly has been applied in the synthesis of crack-free mesoporous carbon monolith with good mechanical stability using a waste plant material as carbon precursor and triblock copolymer F127 as template. The carbon monolith was characterized using transmission electron microscopy, scanning electron microscopy, nitrogen adsorption–desorption measurement, X-ray diffraction and Fourier transform infrared spectroscopy. The results showed that the carbon monolith is mesoporous, has a surface area of 219 m²/g, and a narrow pore size distribution of 6.5 nm

    Killing spinors in supergravity with 4-fluxes

    Full text link
    We study the spinorial Killing equation of supergravity involving a torsion 3-form \T as well as a flux 4-form \F. In dimension seven, we construct explicit families of compact solutions out of 3-Sasakian geometries, nearly parallel \G_2-geometries and on the homogeneous Aloff-Wallach space. The constraint \F \cdot \Psi = 0 defines a non empty subfamily of solutions. We investigate the constraint \T \cdot \Psi = 0, too, and show that it singles out a very special choice of numerical parameters in the Killing equation, which can also be justified geometrically

    Microwave-assisted hydrothermal synthesis of carbon monolith via a soft-template method using resorcinol and formaldehyde as carbon precursor and pluronic F127 as template

    Get PDF
    A new microwave-assisted hydrothermal synthesis of carbon monolith is reported in this work. The process uses microwave heating at 100 °C under acidic condition by employing a triblock copolymer F127 as the template, and resorcinol–formaldehyde as the carbon precursor. Scanning electron microscopy, Fourier transform infrared spectroscopy, nitrogen sorption measurements, transmission electron microscopy, X-ray studies and thermogravimetic analysis were used to characterize the synthesized material. The carbon monolith is crack-free, mesoporous and has a high surface area of 697 m²/g. The results demonstrate that the microwave-assisted hydrothermal synthesis is a fast and simple approach to obtain carbon monoliths, as it reduces effectively the synthesis time from hours to a few minutes which could be an advantage in the large scale production of the material

    Mithramycin encapsulated in polymeric micelles by microfluidic technology as novel therapeutic protocol for beta-thalassemia

    Get PDF
    This report shows that the DNA-binding drug, mithramycin, can be efficiently encapsulated in polymeric micelles (PM-MTH), based on Pluronic® block copolymers, by a new microfluidic approach. The effect of different production parameters has been investigated for their effect on PM-MTH characteristics. The compared analysis of PM-MTH produced by microfluidic and conventional bulk mixing procedures revealed that microfluidics provides a useful platform for the production of PM-MTH with improved controllability, reproducibility, smaller size, and polydispersity. Finally, an investigation of the effects of PM-MTH, produced by microfluidic and conventional bulk mixing procedures, on the erythroid differentiation of both human erythroleukemia and human erythroid precursor cells is reported. It is demonstrated that PM-MTH exhibited a slightly lower toxicity and more pronounced differentiative activity when compared to the free drug. In addition, PM-MTH were able to upregulate preferentially ?-globin messenger ribonucleic acid production and to increase fetal hemoglobin (HbF) accumulation, the percentage of HbF-containing cells, and their HbF content without stimulating ?-globin gene expression, which is responsible for the clinical symptoms of ß-thalassemia. These results represent an important first step toward a potential clinical application, since an increase in HbF could alleviate the symptoms underlying ß-thalassemia and sickle cell anemia. In conclusion, this report suggests that PM-MTH produced by microfluidic approach warrants further evaluation as a potential therapeutic protocol for ß-thalassemia.<br/

    Stable hydrosols for TiO2 coatings

    Get PDF
    The optimum processing parameters required to synthesize, by hydrolysis of titanium isopropoxide (TIP), highly stable hydrosols composed of nanoparticles of the smallest possible size, are deduced both from data available in literature and from our own experiments. The colloids prepared in these conditions are composed of aggregates of anatase (*90%) and brookite crystallites (5–6 nm). They are suitable for coatings and have longterm stability (more than one year) in terms of polymorphic composition, crystallite and agglomerate size. Stable sols composed solely of anatase crystallites (4 nm) can be prepared by partially complexing the TIP by acetylacetone before hydrolysis. It is not possible to produce porous films with these colloids because they are stabilized by electrostatic repulsion which causes the particles to organize themselves, during the drying step, to form materials with a close packed structure. However, coatings with controlled porosity can be prepared from these stable sols through the post addition of polymers, like PEG or block copolymers

    Measurement of the ortho-positronium confinement energy in mesoporous thin films

    Full text link
    In this paper, we present measurements of the ortho-positronium emission energy in vacuum from mesoporous films using the time of flight technique. We show evidence of quantum mechanical confinement in the mesopores that defines the minimal energy of the emitted Ps. Two samples with different effective pore sizes, measured with positron annihilation lifetime spectroscopy, are compared for the data collected in the temperature range 50-400 K. The sample with smaller pore size exhibits a higher minimal energy (73±73\pm5 meV), compared to the sample with bigger pores (48±48\pm5 meV), due to the stronger confinement. The dependence of the emission energy with the temperature of the target is modeled as ortho-positronium being confined in rectangular boxes in thermodynamic equilibrium with the sample. We also measured that the yield of positronium emitted in vacuum is not affected by the temperature of the target.Comment: 8 pages, 9 figures *Added references. * Corrected typos and Fig. 3 label. * Revised argument in section IV B abd C, results unchanged

    Neural networks on chemically patterned "cultured probe" electrode arrays: network growth and activity patterns

    Get PDF
    A 'cultured probe' is a hybrid type of neural information transducer or prosthesis, for stimulation and/or recording of neural activity in the brain or the spinal cord (ventral motor region or dorsal sensory region). It consists of a micro electrode array (MEA) on a planar substrate, each electrode being covered and surrounded by a locally confined network of cultured neurons, obtained by chemical patterning of the substrate. The purpose of the cultured cells is that they act as intermediates for collateral sprouts from the in vivo system, thus allowing for an effective and selective neuron electrode interface. As the local neural network will become spontaneously active and has the capability of information processing, one may envisage future applications of these intermediary networks as 'front-end' signal processors. Two aspects of the development of this kind of cultured probe device are described. First, it is shown how substrates can be chemically modified to confine developing networks, cultured from dissociated rat cortex cells, to the surrounding of an electrode site. Secondly, the paper presents results on neuronal activity in such confined, circular networks and synchronized activity between two such interconnected networks
    corecore