10,271 research outputs found

    The development of the Kent coalfield 1896-1946

    Get PDF
    One of the unique features of the Kent Coalfield is that it is entirely concealed by newer rocks. The existence of a coalfield under southern England, being a direct link between those of South Wales, Somerset and Bristol in the west and the Ruhr, Belgium. and northern France in the east, was predicted by the geologist R. A. C. Godwin-Austen as early as 1856. It was, however, only the rapid increase in demand for Britain's coal in the last quarter of the nineteenth century that made it worth considering testing this hypothesis. The first boring was made in the years 1886-90, and although it discovered coal, this did not in itself prove the existence of a viable coalfield. This could be done only by incurring the heavy cost of boring systematically over a wide area. As the financial returns from such an undertaking were uncertain, it was not surprising that in the early years, around the turn of the century, a dominant role was played by speculators, who were able to induce numerous small investors to risk some of their savings in the expectation of high profits. As minerals in Britain were privately owned, the early pioneer companies not only had to meet the cost of the exploratory borines, but also, if they were not to see the benefit of their work accrue to others, lease beforehand the right to mine coal from local landowners in as much of the surrounding area as possible. This policy was pursued most vigorously by Arthur Burr, a Surrey land specula tor, who raised capital by creating the Kent Coal Conoessions Ltd. and then floating a series of companies allied to it. Burr's enterprise would probably have been. successful had it not been for the water problems encountered at depth in -v- the coalfield. As a result, the Concessions group found itself in control of most of the coalfield, but without the necessary capital to sink and adequately equip its 01ffi collieries. By 1910, however, the discovery of iron ore deposits in east Kent, coupled with the fact that Kent coal was excellent for coking purposes, began to attract the large steel firms of Bolckow, Vaughan Ltd. and Dorman, Long & Co. Ltd. in to the area. The First World War intervened, however, to delay their plans, and to provide an extended lease of life to the Concessions group, which, by the summer of 1914, was facing financial collapse. By the time Dorman, Lone & Co, in alliance with Weetman Pearson (Lord Cowdray), had acquired control over the greater part of the coalfield from the Concessions group, not only was the country's coal industry declining, but so was its steel industry, which suffered an even more severe rate of contraction during the inter-war years. As a result, Pearson and Dorman Long Ltd. was forced to concentrate just on coal production, and this in turn was hampered not only by the water problems, but also by labour shortages and the schemes introduced by the government in 1930 to restrict the country's coal output, in an attempt to maintain prices and revenue in the industry. Nevertheless, production did show a substantial increase between 1927 and 1935, after which it declined as miners left the coalfield to return to their former districts, where employment opportunities were improving in the late thirties. Supporting roles were played in the inter-war years by Richard Tilden Smith, a share underwriter turned industrialist with long standing interests in the coalfield, who acquired one of the Concessions group's two collieries, and by the Powell Duffryn Steam Coal Co. Ltd., which through subsidiary companies, took over the only colliery to be developed by a pioneer company outside the Concessions group. The impossibility of Kent coal, because of its nature, ever gaining more than token access to the more lucrative household market, and then the failure of the local steel industry to materialise meant that the -vi- companies had to develop alternative outlets for their growing outputs. Although nearness to industrial markets in the south-east of England did confer certain advantages were poor consolation for the hoped for developments of either the early pioneers or the later industrialists. Instead of the expected profits, the companies mostly incurred losses, and only the company acquired by Powell Duffryn ever paid a dividend to its shareholders in the years before nationalisation. From the point of view of the Kent miners, the shortage of labour in the coalfield, particularly in the years 1914-20 and 1927-35, was to an important extent responsible for their being amongst the highest paid in the industry. At the same time the more favourable employment opportunities prevailing in Kent compared with other mining districts enabled the Kent Nine Workers Association to develop into a well organised union, which on the whole was able to look after the interests of its members fairly successfully. Throughout the period 1896 to 1946 the Kent Coalfield existed very much at the margin of the British coal industry. Its failure to develop substantially along the lines envisaged by either the early pioneers or by the later industrialists meant that its importance in national terms always remained small

    Increased lifetime of Organic Photovoltaics (OPVs) and the impact of degradation, efficiency and costs in the LCOE of Emerging PVs

    Get PDF
    Emerging photovoltaic (PV) technologies such as organic photovoltaics (OPVs) and perovskites (PVKs) have the potential to disrupt the PV market due to their ease of fabrication (compatible with cheap roll-to-roll processing) and installation, as well as their significant efficiency improvements in recent years. However, rapid degradation is still an issue present in many emerging PVs, which must be addressed to enable their commercialisation. This thesis shows an OPV lifetime enhancing technique by adding the insulating polymer PMMA to the active layer, and a novel model for quantifying the impact of degradation (alongside efficiency and cost) upon levelized cost of energy (LCOE) in real world emerging PV installations. The effect of PMMA morphology on the success of a ternary strategy was investigated, leading to device design guidelines. It was found that either increasing the weight percent (wt%) or molecular weight (MW) of PMMA resulted in an increase in the volume of PMMA-rich islands, which provided the OPV protection against water and oxygen ingress. It was also found that adding PMMA can be effective in enhancing the lifetime of different active material combinations, although not to the same extent, and that processing additives can have a negative impact in the devices lifetime. A novel model was developed taking into account realistic degradation profile sourced from a literature review of state-of-the-art OPV and PVK devices. It was found that optimal strategies to improve LCOE depend on the present characteristics of a device, and that panels with a good balance of efficiency and degradation were better than panels with higher efficiency but higher degradation as well. Further, it was found that low-cost locations were more favoured from reductions in the degradation rate and module cost, whilst high-cost locations were more benefited from improvements in initial efficiency, lower discount rates and reductions in install costs

    Exploring the Structure of Scattering Amplitudes in Quantum Field Theory: Scattering Equations, On-Shell Diagrams and Ambitwistor String Models in Gauge Theory and Gravity

    Get PDF
    In this thesis I analyse the structure of scattering amplitudes in super-symmetric gauge and gravitational theories in four dimensional spacetime, starting with a detailed review of background material accessible to a non-expert. I then analyse the 4D scattering equations, developing the theory of how they can be used to express scattering amplitudes at tree level. I go on to explain how the equations can be solved numerically using a Monte Carlo algorithm, and introduce my Mathematica package treeamps4dJAF which performs these calculations. Next I analyse the relation between the 4D scattering equations and on-shell diagrams in N = 4 super Yang-Mills, which provides a new perspective on the tree level amplitudes of the theory. I apply a similar analysis to N = 8 supergravity, developing the theory of on-shell diagrams to derive new Grassmannian integral formulae for the amplitudes of the theory. In both theories I derive a new worldsheet expression for the 4 point one loop amplitude supported on 4D scattering equations. Finally I use 4D ambitwistor string theory to analyse scattering amplitudes in N = 4 conformal supergravity, deriving new worldsheet formulae for both plane wave and non-plane wave amplitudes supported on 4D scattering equations. I introduce a new prescription to calculate the derivatives of on-shell variables with respect to momenta, and I use this to show that certain non-plane wave amplitudes can be calculated as momentum derivatives of amplitudes with plane wave states

    An investigation of the geothermal potential of the Upper Devonian sandstones beneath eastern Glasgow

    Get PDF
    The urban development of the city of Glasgow is a consequence of its economic development, in part fuelled by local coalfields which exploited rocks in the same sedimentary basin within which geothermal resources in flooded abandoned mine workings, and deeper hot sedimentary aquifers (HSA), are present. This creates an opportunity to provide geothermal heating to areas of dense urban population with high heat demand. The depth of the target HSA geothermal resource, in Upper Devonian aged sandstones of the Stratheden Group, beneath eastern Glasgow was determined by gravity surveying and structural geological modelling. The estimated depth of the geothermal resource ranged from c.1500-2000 m, in the eastward deepening sedimentary basin. To reliably estimate the temperature of the geothermal resource, rigorous corrections to account for the effects of palaeoclimate and topography on heat flow were applied to boreholes in the Greater Glasgow area. The mean regional corrected heat flow was calculated as 75.7 mW m-2, an increase of 13.8 mW m-2 from the uncorrected value of 61.9 mW m-2, emphasising the extent to which heat flow was previously underestimated. Extrapolation of the geothermal gradient, calculated from the mean regional corrected heat flow, results in aquifer temperatures of c. 64-79 °C at depths of c.1500-2000 m beneath eastern Glasgow. The geothermal resource may, therefore, be capable of supporting a wide variety of direct heat use applications if sufficient matrix permeability or fracture networks are present. However, diagenetic effects such as quartz and carbonate cementation were found to restrict the porosity in Upper Devonian sandstones in a borehole and outcrop analogue study. These effects may likewise reduce porosity and intergranular permeability in the target aquifer, although this crucial aspect cannot be fully understood without deep exploratory drilling. To quantify the magnitude of the deep geothermal resource, the indicative thermal power outputs of geothermal doublet wells located in Glasgow’s East End were calculated for the first time, with outputs ranging from 1.3-2.1 MW dependent upon the aquifer depth. This, however, is predicated upon an aquifer permeability of c. 40 mD, which if reduced to 10 mD or less due to the effects of diagenesis, significantly reduces the thermal power outputs to 230-390 kW. The lack of assured project-success, given uncertainties related to the aquifer properties at depth, coupled with high capital costs of drilling, pose barriers to the development of deep geothermal energy in Glasgow. Further investigation of the economic viability of geothermal exploration, and alternative technological solutions is therefore required to mitigate the technical and economic risks. However, if sufficient matrix permeability or fracture networks are present at depth in the Upper Devonian sandstone sequence, then the potential contribution that geothermal energy could make to meeting local heat demand, reducing greenhouse gas emissions, and addressing the ‘energy trilemma’ in Glasgow is significant

    Um modelo para suporte automatizado ao reconhecimento, extração, personalização e reconstrução de gráficos estáticos

    Get PDF
    Data charts are widely used in our daily lives, being present in regular media, such as newspapers, magazines, web pages, books, and many others. A well constructed data chart leads to an intuitive understanding of its underlying data and in the same way, when data charts have wrong design choices, a redesign of these representations might be needed. However, in most cases, these charts are shown as a static image, which means that the original data are not usually available. Therefore, automatic methods could be applied to extract the underlying data from the chart images to allow these changes. The task of recognizing charts and extracting data from them is complex, largely due to the variety of chart types and their visual characteristics. Computer Vision techniques for image classification and object detection are widely used for the problem of recognizing charts, but only in images without any disturbance. Other features in real-world images that can make this task difficult are not present in most literature works, like photo distortions, noise, alignment, etc. Two computer vision techniques that can assist this task and have been little explored in this context are perspective detection and correction. These methods transform a distorted and noisy chart in a clear chart, with its type ready for data extraction or other uses. The task of reconstructing data is straightforward, as long the data is available the visualization can be reconstructed, but the scenario of reconstructing it on the same context is complex. Using a Visualization Grammar for this scenario is a key component, as these grammars usually have extensions for interaction, chart layers, and multiple views without requiring extra development effort. This work presents a model for automated support for custom recognition, and reconstruction of charts in images. The model automatically performs the process steps, such as reverse engineering, turning a static chart back into its data table for later reconstruction, while allowing the user to make modifications in case of uncertainties. This work also features a model-based architecture along with prototypes for various use cases. Validation is performed step by step, with methods inspired by the literature. This work features three use cases providing proof of concept and validation of the model. The first use case features usage of chart recognition methods focused on documents in the real-world, the second use case focus on vocalization of charts, using a visualization grammar to reconstruct a chart in audio format, and the third use case presents an Augmented Reality application that recognizes and reconstructs charts in the same context (a piece of paper) overlaying the new chart and interaction widgets. The results showed that with slight changes, chart recognition and reconstruction methods are now ready for real-world charts, when taking time, accuracy and precision into consideration.Os gráficos de dados são amplamente utilizados na nossa vida diária, estando presentes nos meios de comunicação regulares, tais como jornais, revistas, páginas web, livros, e muitos outros. Um gráfico bem construído leva a uma compreensão intuitiva dos seus dados inerentes e da mesma forma, quando os gráficos de dados têm escolhas de conceção erradas, poderá ser necessário um redesenho destas representações. Contudo, na maioria dos casos, estes gráficos são mostrados como uma imagem estática, o que significa que os dados originais não estão normalmente disponíveis. Portanto, poderiam ser aplicados métodos automáticos para extrair os dados inerentes das imagens dos gráficos, a fim de permitir estas alterações. A tarefa de reconhecer os gráficos e extrair dados dos mesmos é complexa, em grande parte devido à variedade de tipos de gráficos e às suas características visuais. As técnicas de Visão Computacional para classificação de imagens e deteção de objetos são amplamente utilizadas para o problema de reconhecimento de gráficos, mas apenas em imagens sem qualquer ruído. Outras características das imagens do mundo real que podem dificultar esta tarefa não estão presentes na maioria das obras literárias, como distorções fotográficas, ruído, alinhamento, etc. Duas técnicas de visão computacional que podem ajudar nesta tarefa e que têm sido pouco exploradas neste contexto são a deteção e correção da perspetiva. Estes métodos transformam um gráfico distorcido e ruidoso em um gráfico limpo, com o seu tipo pronto para extração de dados ou outras utilizações. A tarefa de reconstrução de dados é simples, desde que os dados estejam disponíveis a visualização pode ser reconstruída, mas o cenário de reconstrução no mesmo contexto é complexo. A utilização de uma Gramática de Visualização para este cenário é um componente chave, uma vez que estas gramáticas têm normalmente extensões para interação, camadas de gráficos, e visões múltiplas sem exigir um esforço extra de desenvolvimento. Este trabalho apresenta um modelo de suporte automatizado para o reconhecimento personalizado, e reconstrução de gráficos em imagens estáticas. O modelo executa automaticamente as etapas do processo, tais como engenharia inversa, transformando um gráfico estático novamente na sua tabela de dados para posterior reconstrução, ao mesmo tempo que permite ao utilizador fazer modificações em caso de incertezas. Este trabalho também apresenta uma arquitetura baseada em modelos, juntamente com protótipos para vários casos de utilização. A validação é efetuada passo a passo, com métodos inspirados na literatura. Este trabalho apresenta três casos de uso, fornecendo prova de conceito e validação do modelo. O primeiro caso de uso apresenta a utilização de métodos de reconhecimento de gráficos focando em documentos no mundo real, o segundo caso de uso centra-se na vocalização de gráficos, utilizando uma gramática de visualização para reconstruir um gráfico em formato áudio, e o terceiro caso de uso apresenta uma aplicação de Realidade Aumentada que reconhece e reconstrói gráficos no mesmo contexto (um pedaço de papel) sobrepondo os novos gráficos e widgets de interação. Os resultados mostraram que com pequenas alterações, os métodos de reconhecimento e reconstrução dos gráficos estão agora prontos para os gráficos do mundo real, tendo em consideração o tempo, a acurácia e a precisão.Programa Doutoral em Engenharia Informátic

    DataProVe: Fully Automated Conformance Verification Between Data Protection Policies and System Architectures

    Get PDF
    Privacy and data protection by design are relevant parts of the General Data Protection Regulation (GDPR), in which businesses and organisations are encouraged to implement measures at an early stage of the system design phase to fulfil data protection requirements. This paper addresses the policy and system architecture design and propose two variants of privacy policy language and architecture description language, respectively, for specifying and verifying data protection and privacy requirements. In addition, we develop a fully automated algorithm based on logic, for verifying three types of conformance relations (privacy, data protection, and functional conformance) between a policy and an architecture specified in our languages’ variants. Compared to related works, this approach supports a more systematic and fine-grained analysis of the privacy, data protection, and functional properties of a system. Our theoretical methods are then implemented as a software tool called DataProVe and its feasibility is demonstrated based on the centralised and decentralised approaches of COVID-19 contact tracing applications

    Management controls, government regulations, customer involvement: Evidence from a Chinese family-owned business

    Get PDF
    This research reports on a case study of a family-owned elevator manufacturing company in China, where management control was sandwiched between the state policies and global customer production requirements. By analysing the role of government and customer, this thesis aimed to illustrate how management control operated in a family-owned business and to see how and why they do management control differently. In particular, it focused on how international production standards and existing Chinese industry policies translated into a set of the management control practices through a local network within the family-owned business I studied. Based on an ethnographic approach to research, I spent six months in the field, conducted over 30 interviews, several conservations, and reviewed relevant internal documents to understand how management control (MC) techniques with humans cooperated in the company. I also understood how two layers of pressure have shaped company behaviour, and how a company located in a developing country is connecting with global network. I also found there is considerable tension among key actors and investigated how the company responded and managed it. Drawing on Actor Network Theory (ANT), I analysed the interviews from key actors, examined the role of government regulations and customer requirements to see how management control being managed under two layers of pressure, i.e., the government regulations (e.g., labour, tax, environment control) and customer requirement (e.g., quality and production control). Management controls were an obligatory passage point (OPP), and transformation of those elements of Western production requirements and government requirements arrived at the Chinese local factory and influenced management control and budgeting. The findings suggest that management control systems are not only a set of technical procedures, but it is also about managing tensions. This understanding shows a linear perspective on MC practices rather than a social perspective. However, when we use ANT as a theoretical perspective, we see those actors who, being obliged and sandwiched, and controlled by external forces for them to follow. Consequently, human actors must work in an unavoidable OPP. This is the tension they face which constructed mundane practices of MC. Hence, MCs are managing such tensions. This study contributes to management control research by analysing management controls in terms of OPP, extends our understanding by illustrating the role of the government and customers, and our understanding of family-owned business from a management controls perspective in a developing country

    How to Be a God

    Get PDF
    When it comes to questions concerning the nature of Reality, Philosophers and Theologians have the answers. Philosophers have the answers that can’t be proven right. Theologians have the answers that can’t be proven wrong. Today’s designers of Massively-Multiplayer Online Role-Playing Games create realities for a living. They can’t spend centuries mulling over the issues: they have to face them head-on. Their practical experiences can indicate which theoretical proposals actually work in practice. That’s today’s designers. Tomorrow’s will have a whole new set of questions to answer. The designers of virtual worlds are the literal gods of those realities. Suppose Artificial Intelligence comes through and allows us to create non-player characters as smart as us. What are our responsibilities as gods? How should we, as gods, conduct ourselves? How should we be gods

    UFO: Unified Foundational Ontology

    Get PDF
    The Unified Foundational Ontology (UFO) was developed over the last two decades by consistently putting together theories from areas such as formal ontology in philosophy, cognitive science, linguistics, and philosophical logics. It comprises a number of micro-theories addressing fundamental conceptual modeling notions, including entity types and relationship types. The aim of this paper is to summarize the current state of UFO, presenting a formalization of the ontology, along with the analysis of a number of cases to illustrate the application of UFO and facilitate its comparison with other foundational ontologies in this special issue. (The cases originate from the First FOUST Workshop – the Foundational Stance, an international forum dedicated to Foundational Ontology research.

    AIUCD 2022 - Proceedings

    Get PDF
    L’undicesima edizione del Convegno Nazionale dell’AIUCD-Associazione di Informatica Umanistica ha per titolo Culture digitali. Intersezioni: filosofia, arti, media. Nel titolo è presente, in maniera esplicita, la richiesta di una riflessione, metodologica e teorica, sull’interrelazione tra tecnologie digitali, scienze dell’informazione, discipline filosofiche, mondo delle arti e cultural studies
    • …
    corecore