Field Trial of a Flexible Real-time Software-defined GPU-based Optical Receiver

We introduce a flexible, software-defined real-time multi-modulation format receiver implemented on an off-the-shelf general-purpose graphics processing unit (GPU). The flexible receiver is able to process 2 GBaud 2-, 4-, 8-, and 16-ary pulse-amplitude modulation (PAM) signals as well as 1 GBaud 4-, 16- and 64-ary quadrature amplitude modulation (QAM) signals, with the latter detected using a Kramers-Kronig (KK) coherent receiver. Experimental performance evaluation is shown for back-to-back. In addition, by using the JGN high speed R&D network testbed, performance is evaluated after transmission over 91 km field-deployed optical fiber and reconfigurable optical add-drop multiplexers (ROADMs).Comment: Accepted for publication at Journal of Lightwave Technology, already available via JLT Early Access, see supplied DOI. This v2 version of the article is improved w.r.t. v1 after JLT peer-review. This article is a longer journal version of the conference paper: S.P. van der Heide, et al., Real-time, Software-Defined, GPU-Based Receiver Field Trial, ECOC 2020 paper We1E5, also via arXiv:2010.1433

Real-time, Software-Defined, GPU-Based Receiver Field Trial

We demonstrate stable real-time operation of a software-defined, GPU-based receiver over a metropolitan network. Massive parallelization is exploited for implementing direct-detection and coherent Kramers-Kronig detection in real time at 2 and 1 GBaud, respectively.Comment: Accepted for presentation at the European Conference on Optical Communications (ECOC) 202

FPGA based technical solutions for high throughput data processing and encryption for 5G communication: A review

The field programmable gate array (FPGA) devices are ideal solutions for high-speed processing applications, given their flexibility, parallel processing capability, and power efficiency. In this review paper, at first, an overview of the key applications of FPGA-based platforms in 5G networks/systems is presented, exploiting the improved performances offered by such devices. FPGA-based implementations of cloud radio access network (C-RAN) accelerators, network function virtualization (NFV)-based network slicers, cognitive radio systems, and multiple input multiple output (MIMO) channel characterizers are the main considered applications that can benefit from the high processing rate, power efficiency and flexibility of FPGAs. Furthermore, the implementations of encryption/decryption algorithms by employing the Xilinx Zynq Ultrascale+MPSoC ZCU102 FPGA platform are discussed, and then we introduce our high-speed and lightweight implementation of the well-known AES-128 algorithm, developed on the same FPGA platform, and comparing it with similar solutions already published in the literature. The comparison results indicate that our AES-128 implementation enables efficient hardware usage for a given data-rate (up to 28.16 Gbit/s), resulting in higher efficiency (8.64 Mbps/slice) than other considered solutions. Finally, the applications of the ZCU102 platform for high-speed processing are explored, such as image and signal processing, visual recognition, and hardware resource management

Radio hardware virtualization for software-defined wireless networks

Software-Defined Network (SDN) is a promising architecture for next generation Internet. SDN can achieve Network Function Virtualization much more efficiently than conventional architectures by splitting the data and control planes. Though SDN emerged first in wired network, its wireless counterpart Software-Defined Wireless Network (SDWN) also attracted an increasing amount of interest in the recent years. Wireless networks have some distinct characteristics compared to the wired networks due to the wireless channel dynamics. Therefore, network controllers present some extra degrees of freedom, such as taking measurements against interference and noise, or adapting channels according to the radio spectrum occupation. These specific characteristics bring about more challenges to wireless SDNs. Currently, SDWN implementations are mainly using customized firmware, such as OpenWRT, running on an embedded application processor in commercial WiFi chips, and restricted to layers above lower Media Access Control. This limitation comes from the fact that radio hardware usually require specific drivers, which have a proprietary implementation by various chipset vendors. Hence, it is difficult, if not impossible, to achieve virtualization on the radio hardware. However, this status has been changing as Software-Defined Radio (SDR) systems open up the entire radio communication stack to radio hobbyists and researchers. The bridge between SDR and SDN will make it possible to bring the softwarization and virtualization of wireless networks down to the physical layer, which will unlock the full potential of SDWN. This paper investigates the necessity and feasibility of extending the virtualization of wireless networks towards the radio hardware. A SDR architecture is presented for radio hardware virtualization in order to facilitate SDWN design and experimentation. We do believe that by adopting the virtualization-oriented hardware accelerator design presented here, an all-layer end-to-end high performance SDWN can be achieved

Software Defined Radio Solutions for Wireless Communications Systems

Wireless technologies have been advancing rapidly, especially in the recent years. Design, implementation, and manufacturing of devices supporting the continuously evolving technologies require great efforts. Thus, building platforms compatible with different generations of standards and technologies has gained a lot of interest. As a result, software defined radios (SDRs) are investigated to offer more flexibility and scalability, and reduce the design efforts, compared to the conventional fixed-function hardware-based solutions.This thesis mainly addresses the challenges related to SDR-based implementation of today’s wireless devices. One of the main targets of most of the wireless standards has been to improve the achievable data rates, which imposes strict requirements on the processing platforms. Realizing real-time processing of high throughput signal processing algorithms using SDR-based platforms while maintaining energy consumption close to conventional approaches is a challenging topic that is addressed in this thesis.Firstly, this thesis concentrates on the challenges of a real-time software-based implementation for the very high throughput (VHT) Institute of Electrical and Electronics Engineers (IEEE) 802.11ac amendment from the wireless local area networks (WLAN) family, where an SDR-based solution is introduced for the frequency-domain baseband processing of a multiple-input multipleoutput (MIMO) transmitter and receiver. The feasibility of the implementation is evaluated with respect to the number of clock cycles and the consumed power. Furthermore, a digital front-end (DFE) concept is developed for the IEEE 802.11ac receiver, where the 80 MHz waveform is divided to two 40 MHz signals. This is carried out through time-domain digital filtering and decimation, which is challenging due to the latency and cyclic prefix (CP) budget of the receiver. Different multi-rate channelization architectures are developed, and the software implementation is presented and evaluated in terms of execution time, number of clock cycles, power, and energy consumption on different multi-core platforms.Secondly, this thesis addresses selected advanced techniques developed to realize inband fullduplex (IBFD) systems, which aim at improving spectral efficiency in today’s congested radio spectrum. IBFD refers to concurrent transmission and reception on the same frequency band, where the main challenge to combat is the strong self-interference (SI). In this thesis, an SDRbased solution is introduced, which is capable of real-time mitigation of the SI signal. The implementation results show possibility of achieving real-time sufficient SI suppression under time-varying environments using low-power, mobile-scale multi-core processing platforms. To investigate the challenges associated with SDR implementations for mobile-scale devices with limited processing and power resources, processing platforms suitable for hand-held devices are selected in this thesis work. On the baseband processing side, a very long instruction word (VLIW) processor, optimized for wireless communication applications, is utilized. Furthermore, in the solutions presented for the DFE processing and the digital SI canceller, commercial off-the-shelf (COTS) multi-core central processing units (CPUs) and graphics processing units (GPUs) are used with the aim of investigating the performance enhancement achieved by utilizing parallel processing.Overall, this thesis provides solutions to the challenges of low-power, and real-time software-based implementation of computationally intensive signal processing algorithms for the current and future communications systems

An efficient GPU implementation of fixed-complexity sphere decoders for MIMO wireless systems

The use of many-core processors such as general purpose Graphic Processing Units (GPUs) has recently become attractive for the efficient implementation of signal processing algorithms for communication systems. This is due to the cost-effectiveness of GPUs together with their potential capability of parallel processing. This paper presents an implementation of the widely employed fixed-complexity sphere decoder on GPUs, which allows to considerably decrease the computational time required for the data detection stage in multiple-input multiple-output systems. Both, the hard-and soft-output versions of the method have been implemented. Speedup results show the proposed GPU implementation boosts the runtime of the parallel execution of the methods in a high performance multi-core CPU. In addition, the throughput of the algorithm is evaluated and is shown to outperform other recent implementations and to fulfill the real-time requirements of several LTE configurations. ©2012-IOS Press and the authors. All rights reserved.This work was partially funded by the TEC2009-13741 project of the Spanish Ministry of Science and by the PROMETEO/2009/013 project of the Generalitat Valenciana.Roger Varea, S.; Ramiro Sánchez, C.; González Salvador, A.; Almenar Terré, V.; Vidal Maciá, AM. (2012). An efficient GPU implementation of fixed-complexity sphere decoders for MIMO wireless systems. Integrated Computer-Aided Engineering. 19(4):341-350. https://doi.org/10.3233/ICA-2012-0410S34135019

A scalable real-time processing chain for radar exploiting illuminators of opportunity

Includes bibliographical references.This thesis details the design of a processing chain and system software for a commensal radar system, that is, a radar that makes use of illuminators of opportunity to provide the transmitted waveform. The stages of data acquisition from receiver back-end, direct path interference and clutter suppression, range/Doppler processing and target detection are described and targeted to general purpose commercial off-the-shelf computing hardware. A detailed low level design of such a processing chain for commensal radar which includes both processing stages and processing stage interactions has, to date, not been presented in the Literature. Furthermore, a novel deployment configuration for a networked multi-site FM broadcast band commensal radar system is presented in which the reference and surveillance channels are record at separate locations