Research and developments of distributed video coding

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The recent developed Distributed Video Coding (DVC) is typically suitable for the applications such as wireless/wired video sensor network, mobile camera etc. where the traditional video coding standard is not feasible due to the constrained computation at the encoder. With DVC, the computational burden is moved from encoder to decoder. The compression efficiency is achieved via joint decoding at the decoder. The practical application of DVC is referred to Wyner-Ziv video coding (WZ) where the side information is available at the decoder to perform joint decoding. This join decoding inevitably causes a very complex decoder. In current WZ video coding issues, many of them emphasise how to improve the system coding performance but neglect the huge complexity caused at the decoder. The complexity of the decoder has direct influence to the system output. The beginning period of this research targets to optimise the decoder in pixel domain WZ video coding (PDWZ), while still achieves similar compression performance. More specifically, four issues are raised to optimise the input block size, the side information generation, the side information refinement process and the feedback channel respectively. The transform domain WZ video coding (TDWZ) has distinct superior performance to the normal PDWZ due to the exploitation in spatial direction during the encoding. However, since there is no motion estimation at the encoder in WZ video coding, the temporal correlation is not exploited at all at the encoder in all current WZ video coding issues. In the middle period of this research, the 3D DCT is adopted in the TDWZ to remove redundancy in both spatial and temporal direction thus to provide even higher coding performance. In the next step of this research, the performance of transform domain Distributed Multiview Video Coding (DMVC) is also investigated. Particularly, three types transform domain DMVC frameworks which are transform domain DMVC using TDWZ based 2D DCT, transform domain DMVC using TDWZ based on 3D DCT and transform domain residual DMVC using TDWZ based on 3D DCT are investigated respectively. One of the important applications of WZ coding principle is error-resilience. There have been several attempts to apply WZ error-resilient coding for current video coding standard e.g. H.264/AVC or MEPG 2. The final stage of this research is the design of WZ error-resilient scheme for wavelet based video codec. To balance the trade-off between error resilience ability and bandwidth consumption, the proposed scheme emphasises the protection of the Region of Interest (ROI) area. The efficiency of bandwidth utilisation is achieved by mutual efforts of WZ coding and sacrificing the quality of unimportant area. In summary, this research work contributed to achieves several advances in WZ video coding. First of all, it is targeting to build an efficient PDWZ with optimised decoder. Secondly, it aims to build an advanced TDWZ based on 3D DCT, which then is applied into multiview video coding to realise advanced transform domain DMVC. Finally, it aims to design an efficient error-resilient scheme for wavelet video codec, with which the trade-off between bandwidth consumption and error-resilience can be better balanced

H. 264 Error Resilience Coding Based on Multihypothesis Motion Compensated Prediction

[[abstract]]In this paper, we propose efficient schemes for enhancing the error robustness of multi-hypothesis motion-compensate predictive (MHMCP) coder without sacrificing the coding efficiency significantly. The proposed schemes utilize the concept of reference picture interleaving and data partitioning to make the MHMCP-coded video more resilient to channel errors, especially for burst channel error. Besides, we also propose a scheme of integrating adaptive intra-refresh into the proposed MHMCP coder to further improve the error recovery speed. Extensive simulation results show that the proposed methods can effectively and quickly mitigate the error propagation and the penalty on coding efficiency for clean channels due to the inserted error resilience features is rather minor[[fileno]]2030144030009[[department]]電機工程學

Compressed-domain techniques for error-resilient video transcoding using RPS

Centre for Signal Processing, Department of Electronic and Information Engineering2008-2009 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Modeling and Evaluating Feedback-Based Error Control for Video Transfer

Packet loss can be detrimental to real-time interactive video over lossy networks because one lost video packet can propagate errors to many subsequent video frames due to the encoding dependency between frames. Feedback-based error control techniques use feedback information from the decoder to adjust coding parameters at the encoder or retransmit lost packets to reduce the error propagation due to data loss. Feedback-based error control techniques have been shown to be more effective than trying to conceal the error at the encoder or decoder alone since they allow the encoder and decoder to cooperate in the error control process. However, there has been no systematic exploration of the impact of video content and network conditions on the performance of feedback-based error control techniques. In particular, the impact of packet loss, round-trip delay, network capacity constraint, video motion and reference distance on the quality of videos using feedback-based error control techniques have not been systematically studied. This thesis presents analytical models for the major feedback-based error control techniques: Retransmission, Reference Picture Selection (both NACK and ACK modes) and Intra Update. These feedback-based error control techniques have been included in H.263/H.264 and MPEG4, the state of the art video in compression standards. Given a round-trip time, packet loss rate, network capacity constraint, our models can predict the quality for a streaming video with retransmission, Intra Update and RPS over a lossy network. In order to exploit our analytical models, a series of studies has been conducted to explore the effect of reference distance, capacity constraint and Intra coding on video quality. The accuracy of our analytical models in predicting the video quality under different network conditions is validated through simulations. These models are used to examine the behavior of feedback-based error control schemes under a variety of network conditions and video content through a series of analytic experiments. Analysis shows that the performance of feedback-based error control techniques is affected by a variety of factors including round-trip time, loss rate, video content and the Group of Pictures (GOP) length. In particular: 1) RPS NACK achieves the best performance when loss rate is low while RPS ACK outperforms other repair techniques when loss rate is high. However RPS ACK performs the worst when loss rate is low. Retransmission performs the worst when the loss rate is high; 2) for a given round-trip time, the loss rate where RPS NACK performs worse than RPS ACK is higher for low motion videos than it is for high motion videos; 3) Videos with RPS NACK always perform the same or better than videos without repair. However, when small GOP sizes are used, videos without repair perform better than videos with RPS ACK; 4) RPS NACK outperform Intra Update for low-motion videos. However, the performance gap between RPS NACK and Intra Update drops when the round-trip time or the intensity of video motion increases. 5) Although the above trends hold for both VQM and PSNR, when VQM is the video quality metric the performance results are much more sensitive to network loss. 6) Retransmission is effective only when the round-trip time is low. When the round-trip time is high, Partial Retransmission achieves almost the same performance as Full Retransmission. These insights derived from our models can help determine appropriate choices for feedback-based error control techniques under various network conditions and video content

Research and developments of Dirac video codec

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video data over the bandwidth limited erroneous channels is another important issue. To enable a video codec for broadcasting application, it is required to implement the corresponding coding tools (e.g. error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and hence their specifications are not defined in the standard. In Dirac as well, the original codec is optimized for storage purpose only and so, several non-normative part of the encoding tools are still required in order to be able to use in other types of application. Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient coding method used here is a simple and low complex coding scheme which provides the error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet erasure wired network. The scheme combines source and channel coding approach where error-resilient source coding is achieved by data partitioning in the wavelet transformed domain and channel coding is achieved through the application of either Rate-Compatible Punctured Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the Internet broadcasting application. But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the 2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the optimum QF of the current encoding frame for a given target bitrate, R. In some applications like video conferencing, real-time encoding and decoding with minimum delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder is the most time consuming stage. So, reducing the complexity of the motion estimation stage will certainly give one step closer to the real-time application. So, as a partial contribution toward realtime application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of motion estimation. The same strategy was implemented in both Dirac and H.264 in order to investigate its performance on different codecs. Together with this fast ME strategy, a method which is called partial cost function calculation in order to further reduce down the computational load of the cost function calculation was presented. The calculation is based upon the pre-defined set of patterns which were chosen in such a way that they have as much maximum coverage as possible over the whole block. In summary, this research work has contributed to the error-resilient transmission of compressed bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this, the final phase of the research has partially contributed toward the real-time application of the Dirac video codec by implementing a fast motion estimation strategy together with partial cost function calculation idea.BBC R&D and Brunel University

Error-resilient multi-view video plus depth based 3-D video coding

Three Dimensional (3-D) video, by definition, is a collection of signals that can provide depth perception of a 3-D scene. With the development of 3-D display technologies and interactive multimedia systems, 3-D video has attracted significant interest from both industries and academia with a variety of applications. In order to provide desired services in various 3-D video applications, the multiview video plus depth (MVD) representation, which can facilitate the generation of virtual views, has been determined to be the best format for 3-D video data. Similar to 2-D video, compressed 3-D video is highly sensitive to transmission errors due to errors propagated from the current frame to the future predicted frames. Moreover, since the virtual views required for auto-stereoscopic displays are rendered from the compressed texture videos and depth maps, transmission errors of the distorted texture videos and depth maps can be further propagated to the virtual views. Besides, the distortions in texture and depth show different effects on the rendering views. Therefore, compared to the reliability of the transmission of the 2-D video, error-resilient texture video and depth map coding are facing major new challenges. This research concentrates on improving the error resilience performance of MVD-based 3-D video in packet loss scenarios. Based on the analysis of the propagating behaviour of transmission errors, a Wyner-Ziv (WZ)-based error-resilient algorithm is first designed for coding of the multi-view video data or depth data. In this scheme, an auxiliary redundant stream encoded according to WZ principle is employed to protect a primary stream encoded with standard multi-view video coding codec. Then, considering the fact that different combinations of texture and depth coding mode will exhibit varying robustness to transmission errors, a rate-distortion optimized mode switching scheme is proposed to strike the optimal trade-off between robustness and compression effciency. In this approach, the texture and depth modes are jointly optimized by minimizing the overall distortion of both the coded and synthesized views subject to a given bit rate. Finally, this study extends the research on the reliable transmission of view synthesis prediction (VSP)-based 3-D video. In order to mitigate the prediction position error caused by packet losses in the depth map, a novel disparity vector correction algorithm is developed, where the corrected disparity vector is calculated from the depth error. To facilitate decoder error concealment, the depth error is recursively estimated at the decoder. The contributions of this dissertation are multifold. First, the proposed WZbased error-resilient algorithm can accurately characterize the effect of transmission error on multi-view distortion at the transform domain in consideration of both temporal and inter-view error propagation, and based on the estimated distortion, this algorithm can perform optimal WZ bit allocation at the encoder through explicitly developing a sophisticated rate allocation strategy. This proposed algorithm is able to provide a finer granularity in performing rate adaptivity and unequal error protection for multi-view data, not only at the frame level, but also at the bit-plane level. Secondly, in the proposed mode switching scheme, a new analytic model is formulated to optimally estimate the view synthesis distortion due to packet losses, in which the compound impact of the transmission distortions of both the texture video and the depth map on the quality of the synthesized view is mathematically analysed. The accuracy of this view synthesis distortion model is demonstrated via simulation results and, further, the estimated distortion is integrated into a rate-distortion framework for optimal mode switching to achieve substantial performance gains over state-of-the-art algorithms. Last, but not least, this dissertation provides a preliminary investigation of VSP-based 3-D video over unreliable channel. In the proposed disparity vector correction algorithm, the pixel-level depth map error can be precisely estimated at the decoder without the deterministic knowledge of the error-free reconstructed depth. The approximation of the innovation term involved in depth error estimation is proved theoretically. This algorithm is very useful to conceal the position-erroneous pixels whose disparity vectors are correctly received

A Review of Error Resilience Techniques in Video Streaming

Abstract-Delivering video data of satisfactory quality over unreliable networks -such as the internet or wireless networks -is a demanding area which has received significant attention of the research community over the past few years. Given the fact that packet loss is inevitable and therefore the presence of errors granted, the effort is directed towards limiting the effect of these errors. A number of techniques have been developed to address this issue. This paper aims to summarize the most significant approaches for: error resilience, error concealment and joint encoder-decoder error control techniques, and to provide a thorough discussion of the benefits and drawbacks of these error control methods. Furthermore, two case studies of error resilience utilization are presented, namely Ad-hoc networks and Multimedia Broadcast Multiple Services (MBMS)

Error resilient packet switched H.264 video telephony over third generation networks.

Real-time video communication over wireless networks is a challenging problem because wireless channels suffer from fading, additive noise and interference, which translate into packet loss and delay. Since modern video encoders deliver video packets with decoding dependencies, packet loss and delay can significantly degrade the video quality at the receiver. Many error resilience mechanisms have been proposed to combat packet loss in wireless networks, but only a few were specifically designed for packet switched video telephony over Third Generation (3G) networks. The first part of the thesis presents an error resilience technique for packet switched video telephony that combines application layer Forward Error Correction (FEC) with rateless codes, Reference Picture Selection (RPS) and cross layer optimization. Rateless codes have lower encoding and decoding computational complexity compared to traditional error correcting codes. One can use them on complexity constrained hand-held devices. Also, their redundancy does not need to be fixed in advance and any number of encoded symbols can be generated on the fly. Reference picture selection is used to limit the effect of spatio-temporal error propagation. Limiting the effect of spatio-temporal error propagation results in better video quality. Cross layer optimization is used to minimize the data loss at the application layer when data is lost at the data link layer. Experimental results on a High Speed Packet Access (HSPA) network simulator for H.264 compressed standard video sequences show that the proposed technique achieves significant Peak Signal to Noise Ratio (PSNR) and Percentage Degraded Video Duration (PDVD) improvements over a state of the art error resilience technique known as Interactive Error Control (IEC), which is a combination of Error Tracking and feedback based Reference Picture Selection. The improvement is obtained at a cost of higher end-to-end delay. The proposed technique is improved by making the FEC (Rateless code) redundancy channel adaptive. Automatic Repeat Request (ARQ) is used to adjust the redundancy of the Rateless codes according to the channel conditions. Experimental results show that the channel adaptive scheme achieves significant PSNR and PDVD improvements over the static scheme for a simulated Long Term Evolution (LTE) network. In the third part of the thesis, the performance of the previous two schemes is improved by making the transmitter predict when rateless decoding will fail. In this case, reference picture selection is invoked early and transmission of encoded symbols for that source block is aborted. Simulations for an LTE network show that this results in video quality improvement and bandwidth savings. In the last part of the thesis, the performance of the adaptive technique is improved by exploiting the history of the wireless channel. In a Rayleigh fading wireless channel, the RLC-PDU losses are correlated under certain conditions. This correlation is exploited to adjust the redundancy of the Rateless code and results in higher Rateless code decoding success rate and higher video quality. Simulations for an LTE network show that the improvement was significant when the packet loss rate in the two wireless links was 10%. To facilitate the implementation of the proposed error resilience techniques in practical scenarios, RTP/UDP/IP level packetization schemes are also proposed for each error resilience technique. Compared to existing work, the proposed error resilience techniques provide better video quality. Also, more emphasis is given to implementation issues in 3G networks