9,962 research outputs found
Optimization Based Self-localization for IoT Wireless Sensor Networks
In this paper we propose an embedded optimization framework for the simultaneous self-localization of all sensors in wireless sensor networks making use of range measurements from ultra-wideband (UWB) signals. Low-power UWB radios, which provide time-of-arrival measurements with decimeter accuracy over large distances, have been increasingly envisioned for realtime localization of IoT devices in GPS-denied environments and large sensor networks. In this work, we therefore explore different non-linear least-squares optimization problems to formulate the localization task based on UWB range measurements. We solve the resulting optimization problems directly using non-linear-programming algorithms that guarantee convergence to locally optimal solutions. This optimization framework allows the consistent comparison of different optimization methods for sensor localization. We propose and demonstrate the best optimization approach for the self-localization of sensors equipped with off-the-shelf microcontrollers using state-of-the-art code generation techniques for the plug-and-play deployment of the optimal localization algorithm. Numerical results indicate that the proposed approach improves localization accuracy and decreases computation times relative to existing iterative methods
Distributed Cooperative Localization in Wireless Sensor Networks without NLOS Identification
In this paper, a 2-stage robust distributed algorithm is proposed for
cooperative sensor network localization using time of arrival (TOA) data
without identification of non-line of sight (NLOS) links. In the first stage,
to overcome the effect of outliers, a convex relaxation of the Huber loss
function is applied so that by using iterative optimization techniques, good
estimates of the true sensor locations can be obtained. In the second stage,
the original (non-relaxed) Huber cost function is further optimized to obtain
refined location estimates based on those obtained in the first stage. In both
stages, a simple gradient descent technique is used to carry out the
optimization. Through simulations and real data analysis, it is shown that the
proposed convex relaxation generally achieves a lower root mean squared error
(RMSE) compared to other convex relaxation techniques in the literature. Also
by doing the second stage, the position estimates are improved and we can
achieve an RMSE close to that of the other distributed algorithms which know
\textit{a priori} which links are in NLOS.Comment: Accepted in WPNC 201
Sub-Nanosecond Time of Flight on Commercial Wi-Fi Cards
Time-of-flight, i.e., the time incurred by a signal to travel from
transmitter to receiver, is perhaps the most intuitive way to measure distances
using wireless signals. It is used in major positioning systems such as GPS,
RADAR, and SONAR. However, attempts at using time-of-flight for indoor
localization have failed to deliver acceptable accuracy due to fundamental
limitations in measuring time on Wi-Fi and other RF consumer technologies.
While the research community has developed alternatives for RF-based indoor
localization that do not require time-of-flight, those approaches have their
own limitations that hamper their use in practice. In particular, many existing
approaches need receivers with large antenna arrays while commercial Wi-Fi
nodes have two or three antennas. Other systems require fingerprinting the
environment to create signal maps. More fundamentally, none of these methods
support indoor positioning between a pair of Wi-Fi devices
without~third~party~support.
In this paper, we present a set of algorithms that measure the time-of-flight
to sub-nanosecond accuracy on commercial Wi-Fi cards. We implement these
algorithms and demonstrate a system that achieves accurate device-to-device
localization, i.e. enables a pair of Wi-Fi devices to locate each other without
any support from the infrastructure, not even the location of the access
points.Comment: 14 page
Jointly Optimizing Placement and Inference for Beacon-based Localization
The ability of robots to estimate their location is crucial for a wide
variety of autonomous operations. In settings where GPS is unavailable,
measurements of transmissions from fixed beacons provide an effective means of
estimating a robot's location as it navigates. The accuracy of such a
beacon-based localization system depends both on how beacons are distributed in
the environment, and how the robot's location is inferred based on noisy and
potentially ambiguous measurements. We propose an approach for making these
design decisions automatically and without expert supervision, by explicitly
searching for the placement and inference strategies that, together, are
optimal for a given environment. Since this search is computationally
expensive, our approach encodes beacon placement as a differential neural layer
that interfaces with a neural network for inference. This formulation allows us
to employ standard techniques for training neural networks to carry out the
joint optimization. We evaluate this approach on a variety of environments and
settings, and find that it is able to discover designs that enable high
localization accuracy.Comment: Appeared at 2017 International Conference on Intelligent Robots and
Systems (IROS
Invariant EKF Design for Scan Matching-aided Localization
Localization in indoor environments is a technique which estimates the
robot's pose by fusing data from onboard motion sensors with readings of the
environment, in our case obtained by scan matching point clouds captured by a
low-cost Kinect depth camera. We develop both an Invariant Extended Kalman
Filter (IEKF)-based and a Multiplicative Extended Kalman Filter (MEKF)-based
solution to this problem. The two designs are successfully validated in
experiments and demonstrate the advantage of the IEKF design
- …