Admission Control for Multiuser Communication Systems

During the last few years, broadband wireless communication has experienced very rapid growth in telecommunications industry. Hence, the performance analysis of such systems is one of the most important topics. However, accurate systems’ analysis requires first good modeling of the network traffic. Moreover, broadband wireless communication should achieve certain performance in order to satisfy the customers as well as the operators. Therefore, some call admission control techniques should be integrated with wireless networks in order to deny new users/services if accepting them will lead to degrade the network performance to less than the allowed threshold. This thesis mainly discusses the above two issues which can be summarized as follows. First issue is the traffic modeling of wireless communication. The performance analysis is discussed in terms of the quality of services (QoS) and also the grade of services (GoS). Different scenarios have been studies such as enhancing the GoS of handover users. The second issue is the admission control algorithms. Admission Control is part of radio resource management. The performance of admission control is affected by channel characteristics such as fading and interference. Hence, some wireless channel characteristics are introduced briefly. Seven different channel allocation schemes have been discussed and analyzed. Moreover, different admission control algorithms are analyzed such as power-based and multi-classes fuzzy-logic based. Some simulations analyses are given as well to show the system performance of different algorithms and scenarios.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Wireless digital point to multipoint link utilizing wideband CDMA

One of the proposed techniques for multiple access communications for the third generation is code division multiple access (CDMA). This has been shown to be a viable alternative to both TDMA and FDMA. While there does not appear to be a single multiple accessing technique that is superior to others in all situations, there are characteristics of CDMA that give it a distinct advantage over the other multiple access techniques. In CDMA each user is provided with an unique, orthogonal code. If these K codes are orthogonal and uncorrelated with each other, than K independent users can transmit at the same time and in the same radio bandwidth. The receivers decorrelate the information and regenerate the original transmitted signal. It must be noted that the term "Wideband CDMA" is used comparatively to the only existing commercial CDMA system, IS-95 which uses a spectral bandwidth of only 1.2288 MHz. This thesis examines and evaluates a good set of orthonormal codes (orthogonal and normalized to have equal power) and their application to providing accessing for a point to multipoint (PMP) stationary system. The correlation properties, design and constellation properties of these codes are investigated. The system model is then simulated using Systemview and then evaluated in terms of it's bit error rate, user capacity and Erlang with addition of users to the system

Aspects of capacity enhancement techniques in cellular networks

Frequency spectrum is the scarce resource. From mobile operator’s point of view, efficient utilization of the radio resources is needed while providing maximum coverage, and ensuring good quality of service with minimal infrastructure. In high capacity demanding areas, multilayer networks with multiband and multi radio access technologies are deployed, in order to meet the capacity requirements. In his doctoral thesis, Usman Sheikh has proposed a “Smart Traffic Handling” strategy, which is based on user’s required service type and location. Smart traffic handling scheme efficiently utilizes the different layers of the network, balances the load among them, and improves the system capacity. Power resources at base station are also limited. Usman Sheikh’s proposed “Power Control Scheme for High Speed Downlink Packet Access (HSDPA) network” improves the cell edge user experience, while maintaining the fairness among the other users in a cell. With the help of a proposed power control scheme, a user far from the base station can also enjoy the better quality of service. Generally, mobile operators use macro cells with wide beam antennas for wider coverage in the cell, but future capacity demands cannot be achieved by using only them. “Higher Order Sectorization” is one possible way to increase the system capacity. Usman Sheikh proposed new network layouts called “Snowflake” and “Flower” tessellations, for 6-sector and 12-sector sites, respectively. These tessellations can be used as a basis for making a nominal network plan for sites with higher order sectorization. These tessellations would be helpful for simulation purposes. Through his work, he has also tried to highlight the importance of deploying “Adaptive MIMO Switching” in Long Term Evolution (LTE) system, the fourth generation of wireless networks. In future, the fifth generation of wireless networks is expected to offer thousand times more capacity compared to LTE. The novel concept of “Single Path Multiple Access (SPMA)” given by Usman Sheikh is a revolutionary idea, and gives a possibility to increase the system capacity by a giant margin. SPMA can be considered as a right step towards 5G technology. Usman Sheikh’s work is of high importance not only from mobile operator’s point of view; rather his contributions to the scientific community will also lead to better user (customer) experience. His work will definitely benefit the mankind in utilizing the limited resources in an optimum and efficient way

Mobile and Wireless Communications

Mobile and Wireless Communications have been one of the major revolutions of the late twentieth century. We are witnessing a very fast growth in these technologies where mobile and wireless communications have become so ubiquitous in our society and indispensable for our daily lives. The relentless demand for higher data rates with better quality of services to comply with state-of-the art applications has revolutionized the wireless communication field and led to the emergence of new technologies such as Bluetooth, WiFi, Wimax, Ultra wideband, OFDMA. Moreover, the market tendency confirms that this revolution is not ready to stop in the foreseen future. Mobile and wireless communications applications cover diverse areas including entertainment, industrialist, biomedical, medicine, safety and security, and others, which definitely are improving our daily life. Wireless communication network is a multidisciplinary field addressing different aspects raging from theoretical analysis, system architecture design, and hardware and software implementations. While different new applications are requiring higher data rates and better quality of service and prolonging the mobile battery life, new development and advanced research studies and systems and circuits designs are necessary to keep pace with the market requirements. This book covers the most advanced research and development topics in mobile and wireless communication networks. It is divided into two parts with a total of thirty-four stand-alone chapters covering various areas of wireless communications of special topics including: physical layer and network layer, access methods and scheduling, techniques and technologies, antenna and amplifier design, integrated circuit design, applications and systems. These chapters present advanced novel and cutting-edge results and development related to wireless communication offering the readers the opportunity to enrich their knowledge in specific topics as well as to explore the whole field of rapidly emerging mobile and wireless networks. We hope that this book will be useful for students, researchers and practitioners in their research studies

Modeling the Use of an Airborne Platform for Cellular Communications Following Disruptions

In the wake of a disaster, infrastructure can be severely damaged, hampering telecommunications. An Airborne Communications Network (ACN) allows for rapid and accurate information exchange that is essential for the disaster response period. Access to information for survivors is the start of returning to self-sufficiency, regaining dignity, and maintaining hope. Real-world testing has proven that such a system can be built, leading to possible future expansion of features and functionality of an emergency communications system. Currently, there are no airborne civilian communications systems designed to meet the demands of the public following a natural disaster. A system allowing even a limited amount of communications post-disaster is a great improvement on the current situation, where telecommunications are frequently not available. It is technically feasible to use an airborne, wireless, cellular system quickly deployable to disaster areas and configured to restore some of the functions of damaged terrestrial telecommunications networks. The system requirements were presented, leading to the next stage of the planned research, where a range of possible solutions were examined. The best solution was selected based on the earlier, predefined criteria. The system was modeled, and a test ii system built. The system was tested and redesigned when necessary, to meet the requirements. The research has shown how the combination of technology, especially the recent miniaturizations and move to open source software for cellular network components can allow sophisticated cellular networks to be implemented. The ACN system proposed could enable connectivity and reduce the communications problems that were experienced following Hurricane Sandy and Katrina. Experience with both natural and man-made disasters highlights the fact that communications are useful only to the extent that they are accessible and useable by the population

Dimensioning mobile WiMAX in the access and core network : a case study

Existing broadband wireless technologies such as evolving 3G and WiFi have enjoyed widespread adoption but are far from offering the flexibility in deployment and high data rates. Mobile WiMAX, an emerging broadband wireless technology promises to bring a new experience to mobile broadband services by offering users high data rates and efficient network access techniques. This thesis work provides a technical description of mobile WiMAX and compares its technical capabilities with the existing technologies such as WiFi and 3G. The work continues further on dimensioning mobile WiMAX in the access and core network. In the access network, we determine the number of base stations required to cover a given metropolitan area, explore their configurations, and perform frequency selection. In the core network we dimension the interfaces, and nodes involved. From the study we will show that WiMAX provides the operator with the antenna configurations options of high capacities, large cell coverage area, and a wide selection of QoS classes. The study will also show that the data density requirements of customers, resulting from the capacity analysis are fulfilled by properly dimensioning the elements in the access and core network

Final report on the evaluation of RRM/CRRM algorithms

Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin

On the modeling of WCDMA system performance with propagation data

The aim of this study was to develop calculation methods for estimating the most important system level performance characteristics of the WCDMA radio network (i.e. network capacity and coverage) in the presence of interference from various sources. The calculation methods described in this work enable the fast design of radio systems with a reasonable degree of accuracy, where different system parameters, propagation conditions and networks as well as frequency scenarios can be easily tested. The work also includes the development and verification of a propagation model for a microcellular environment. Traditionally, system level performance figures have been retrieved using system simulations where the radio network has been modeled as accurately as possible. This has included base stations and mobile stations, propagation models, traffic models and mobility models. Various radio resource management (RRM) algorithms, such as power controls and handovers have also been modeled. However, these system simulations are very complex and time consuming and typically the models are difficult to modify. The idea behind this work is to use the main statistical parameters retrieved from accurate, case specific propagation models and to use these statistics as input for the developed analytical radio network models. When used as output from these analytical models we are able to obtain the performance measures of the network. The specific application area for the developed methods is the evaluation of the effect of the interference from the adjacent frequency channels. Adjacent channel interference decreases the efficiency of the usage of the electromagnetic spectrum i.e. the spectral efficiency. The aim of a radio system design is to ensure that the reduction in the spectral efficiency is as low as possible. This interference may originate from the same or a different radio system and from the same or another operator's network. The strength of this interference is dependent on the system parameters and the network layout. The standard questions regarding adjacent system interference between different operators' network are what guard band is needed between the radio carriers in order to maintain the quality of the network or what are the main mobile and network parameters, such as adjacent channel emission levels or adjacent channel selectivity, required in order to achieve satisfactory network performance. With the developed method proposed here it is possible to answer these questions with reasonable accuracy. One important aspect of network performance is the radio wave propagation environment for which the radio systems are designed. This thesis presents methods evaluating radio wave propagation, especially for cases where the base station antenna is below the rooftops, i.e. in the case of microcellular network environments. The developed microcellular propagation model has been developed for network planning purposes and it has been verified using numerous field propagation measurements. The model can be used in cases where the mobile station is located either indoors or outdoors.reviewe

Identification of Technologies for Provision of Future Aeronautical Communications

This report describes the process, findings, and recommendations of the second of three phases of the Future Communications Study (FCS) technology investigation conducted by NASA Glenn Research Center and ITT Advanced Engineering & Sciences Division for the Federal Aviation Administration (FAA). The FCS is a collaborative research effort between the FAA and Eurocontrol to address frequency congestion and spectrum depletion for safety critical airground communications. The goal of the technology investigation is to identify technologies that can support the longterm aeronautical mobile communication operating concept. A derived set of evaluation criteria traceable to the operating concept document is presented. An adaptation of the analytical hierarchy process is described and recommended for selecting candidates for detailed evaluation. Evaluations of a subset of technologies brought forward from the prescreening process are provided. Five of those are identified as candidates with the highest potential for continental airspace solutions in L-band (P-34, W-CDMA, LDL, B-VHF, and E-TDMA). Additional technologies are identified as best performers in the unique environments of remote/oceanic airspace in the satellite bands (Inmarsat SBB and a custom satellite solution) and the airport flight domain in C-band (802.16e). Details of the evaluation criteria, channel models, and the technology evaluations are provided in appendixes