Thermal-Hydraulic performance in a microchannel heat sink equipped with longitudinal vortex generators (LVGs) and nanofluid

In this study, the numerical conjugate heat transfer and hydraulic performance of nanofluids flow in a rectangular microchannel heat sink (RMCHS) with longitudinal vortex generators (LVGs) was investigated at different Reynolds numbers (200-1200). Three-dimensional simulations are performed on a microchannel heated by a constant temperature with five different configurations with different angles of attack for the LVGs under laminar flow conditions. The study uses five different nanofluid combinations of Al2O3 or CuO, containing low volume fractions in the range of 0.5% to 3.0% with various nanoparticle sizes that are dispersed in pure water, PAO (Polyalphaolefin) or ethylene glycol. The results show that for Reynolds number ranging from 100 to 1100, Al2O3-water has the best performance compared with CuO nanofluid with Nusselt number values between 7.67 and 14.7, with an associated increase in Fanning friction factor by values of 0.0219-0.095. For the case of different base fluids, the results show that CuO-PAO has the best performance with Nusselt number values between 9.57 and 15.88, with an associated increase in Fanning friction factor by 0.022-0.096. The overall performance of all configurations of microchannels equipped with LVGs and nanofluid showed higher values than the ones without LVG and water as a working fluid. © 2020 by the authors

Entropy Generation and Heat Transfer Performances of Al2O3-Water Nanofluid Transitional Flow in Rectangular Channels with Dimples and Protrusions

Nanofluid has great potentials in heat transfer enhancement and entropy generation decrease as an effective cooling medium. Effects of Al2O3-water nanofluid flow on entropy generation and heat transfer performance in a rectangular conventional channel are numerically investigated in this study. Four different volume fractions are considered and the boundary condition with a constant heat flux is adopted. The flow Reynolds number covers laminar flow, transitional flow and turbulent flow. The influences of the flow regime and nanofluid volume fraction are examined. Furthermore, dimples and protrusions are employed, and the impacts on heat transfer characteristic and entropy generation are acquired. It is found that the average heat transfer entropy generation rate descends and the average friction entropy generation rate rises with an increasing nanofluid volume fraction. The effect of nanofluid on average heat transfer entropy generation rate declines when Reynolds number ascends, which is inverse for average friction entropy generation rate. The average wall temperature and temperature uniformity both drop accompanied with increasing pumping power with the growth in nanofluid volume fraction. The employment of dimples and protrusions significantly decreases the average entropy generation rate and improve the heat transfer performance. The effect of dimple-case shows great difference with that of protrusion-case