Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices

Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments; where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution, tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally, we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance

A Review of Wireless Sensor Networks with Cognitive Radio Techniques and Applications

The advent of Wireless Sensor Networks (WSNs) has inspired various sciences and telecommunication with its applications, there is a growing demand for robust methodologies that can ensure extended lifetime. Sensor nodes are small equipment which may hold less electrical energy and preserve it until they reach the destination of the network. The main concern is supposed to carry out sensor routing process along with transferring information. Choosing the best route for transmission in a sensor node is necessary to reach the destination and conserve energy. Clustering in the network is considered to be an effective method for gathering of data and routing through the nodes in wireless sensor networks. The primary requirement is to extend network lifetime by minimizing the consumption of energy. Further integrating cognitive radio technique into sensor networks, that can make smart choices based on knowledge acquisition, reasoning, and information sharing may support the network's complete purposes amid the presence of several limitations and optimal targets. This examination focuses on routing and clustering using metaheuristic techniques and machine learning because these characteristics have a detrimental impact on cognitive radio wireless sensor node lifetime

A Hybrid Modified Ant Colony Optimization - Particle Swarm Optimization Algorithm for Optimal Node Positioning and Routing in Wireless Sensor Networks

Wireless Sensor Networks (WSNs) have been widely deployed in hostile locations for environmental monitoring. Sensor placement and energy management are the two main factors that should be focused due to certain limitations in WSNs. The nodes in a sensor network might not stay charged when energy draining takes place; therefore, increasing the operational lifespan of the network is the primary purpose of energy management. Recently, major research interest in WSN has been focused with the essential aspect of localization. Several types of research have also taken place on the challenges of node localization of wireless sensor networks with the inclusion of range-free and range-based localization algorithms. In this work, the optimal positions of Sensor Nodes (SNs) are determined by proposing a novel Hybrid M-ACO – PSO (HMAP) algorithm. In the HMAP method, the improved PSO utilizes learning strategies for estimating the relay nodes\u27 optimal positions. The M-ACO assures the data conveyance. A route discovers when it relates to the ideal route irrespective of the possibility of a system that includes the nodes with various transmission ranges, and the network lifetime improves. The proposed strategy is executed based on the energy, throughput, delivery ratio, overhead, and delay of the information packets

RF Localization in Indoor Environment

In this paper indoor localization system based on the RF power measurements of the Received Signal Strength (RSS) in WLAN environment is presented. Today, the most viable solution for localization is the RSS fingerprinting based approach, where in order to establish a relationship between RSS values and location, different machine learning approaches are used. The advantage of this approach based on WLAN technology is that it does not need new infrastructure (it reuses already and widely deployed equipment), and the RSS measurement is part of the normal operating mode of wireless equipment. We derive the Cramer-Rao Lower Bound (CRLB) of localization accuracy for RSS measurements. In analysis of the bound we give insight in localization performance and deployment issues of a localization system, which could help designing an efficient localization system. To compare different machine learning approaches we developed a localization system based on an artificial neural network, k-nearest neighbors, probabilistic method based on the Gaussian kernel and the histogram method. We tested the developed system in real world WLAN indoor environment, where realistic RSS measurements were collected. Experimental comparison of the results has been investigated and average location estimation error of around 2 meters was obtained

Achieving Minimum Coverage Breach under Bandwidth Constraints in Wireless Sensor Networks

This paper addresses the coverage breach problem in wireless sensor networks with limited bandwidths. In wireless sensor networks, sensor nodes are powered by batteries. To make efficient use of battery energy is critical to sensor network lifetimes. When targets are redundantly covered by multiple sensors, especially in stochastically deployed sensor networks, it is possible to save battery energy by organizing sensors into mutually exclusive subsets and alternatively activating only one subset at any time. Active nodes are responsible for sensing, computing and communicating. While the coverage of each subset is an important metric for sensor organization, the size of each subset also plays an important role in sensor network performance because when active sensors periodically send data to base stations, contention for channel access must be considered. The number of available channels imposes a limit on the cardinality of each subset. Coverage breach happens when a subset of sensors cannot completely cover all the targets. To make efficient use of both energy and bandwidth with a minimum coverage breach is the goal of sensor network design. This paper presents the minimum breach problem using a mathematical model, studies the computational complexity of the problem, and provides two approximate heuristics. Effects of increasing the number of channels and increasing the number of sensors on sensor network coverage are studied through numerical simulations. Overall, the simulation results reveal that when the number of sensors increases, network lifetimes can be improved without loss of network coverage if there is no bandwidth constraint; with bandwidth constraints, network lifetimes may be improved further at the cost of coverage breach

Wearable flexible lightweight modular RFID tag with integrated energy harvester

A novel wearable radio frequency identification (RFID) tag with sensing, processing, and decision-taking capability is presented for operation in the 2.45-GHz RFID superhigh frequency (SHF) band. The tag is powered by an integrated light harvester, with a flexible battery serving as an energy buffer. The proposed active tag features excellent wearability, very high read range, enhanced functionality, flexible interfacing with diverse low-power sensors, and extended system autonomy through an innovative holistic microwave system design paradigm that takes antenna design into consideration from the very early stages. Specifically, a dedicated textile shorted circular patch antenna with monopolar radiation pattern is designed and optimized for highly efficient and stable operation within the frequency band of operation. In this process, the textile antenna's functionality is augmented by reusing its surface as an integration platform for light-energy-harvesting, sensing, processing, and transceiver hardware, without sacrificing antenna performance or the wearer's comfort. The RFID tag is validated by measuring its stand-alone and on-body characteristics in free-space conditions. Moreover, measurements in a real-world scenario demonstrate an indoor read range up to 23 m in nonline-of-sight indoor propagation conditions, enabling interrogation by a reader situated in another room. In addition, the RFID platform only consumes 168.3 mu W, when sensing and processing are performed every 60 s

Survey on Various Aspects of Clustering in Wireless Sensor Networks Employing Classical, Optimization, and Machine Learning Techniques

A wide range of academic scholars, engineers, scientific and technology communities are interested in energy utilization of Wireless Sensor Networks (WSNs). Their extensive research is going on in areas like scalability, coverage, energy efficiency, data communication, connection, load balancing, security, reliability and network lifespan. Individual researchers are searching for affordable methods to enhance the solutions to existing problems that show unique techniques, protocols, concepts, and algorithms in the wanted domain. Review studies typically offer complete, simple access or a solution to these problems. Taking into account this motivating factor and the effect of clustering on the decline of energy, this article focuses on clustering techniques using various wireless sensor networks aspects. The important contribution of this paper is to give a succinct overview of clustering

Mobile Wireless Sensor Networks: An Overview

Mobile wireless sensor networks (MWSNs) have emerged and shifted the focus from the typical static wireless sensor networks to networks with mobile sensor nodes that are capable to sense the various types of events. Also, they can change their position frequently in a specific sensing area. The applications of the MWSNs can be widely divided into time-driven, event-driven, on-demand and tracking based applications. Mobile sensor node architecture, residual energy utilization, mobility, topology, scalability, localization, data collection routing, Quality of Service (QoS), etc., are the key factors to design an energy efficient MWSNs for some specific purpose. This chapter deals with an overview of the MWSNs and a few significant phenomena to design an energy efficient MWSNs to the large-scale environment