Design and implementation of frequency synthesizers for 3-10 ghz mulitband ofdm uwb communication

The allocation of frequency spectrum by the FCC for Ultra Wideband (UWB) communications in the 3.1-10.6 GHz has paved the path for very high data rate Gb/s wireless communications. Frequency synthesis in these communication systems involves great challenges such as high frequency and wideband operation in addition to stringent requirements on frequency hopping time and coexistence with other wireless standards. This research proposes frequency generation schemes for such radio systems and their integrated implementations in silicon based technologies. Special emphasis is placed on efficient frequency planning and other system level considerations for building compact and practical systems for carrier frequency generation in an integrated UWB radio. This work proposes a frequency band plan for multiband OFDM based UWB radios in the 3.1-10.6 GHz range. Based on this frequency plan, two 11-band frequency synthesizers are designed, implemented and tested making them one of the first frequency synthesizers for UWB covering 78% of the licensed spectrum. The circuits are implemented in 0.25µm SiGe BiCMOS and the architectures are based on a single VCO at a fixed frequency followed by an array of dividers, multiplexers and single sideband (SSB) mixers to generate the 11 required bands in quadrature with fast hopping in much less than 9.5 ns. One of the synthesizers is integrated and tested as part of a 3-10 GHz packaged receiver. It draws 80 mA current from a 2.5 V supply and occupies an area of 2.25 mm2. Finally, an architecture for a UWB synthesizer is proposed that is based on a single multiband quadrature VCO, a programmable integer divider with 50% duty cycle and a single sideband mixer. A frequency band plan is proposed that greatly relaxes the tuning range requirement of the multiband VCO and leads to a very digitally intensive architecture for wideband frequency synthesis suitable for implementation in deep submicron CMOS processes. A design in 130nm CMOS occupies less than 1 mm2 while consuming 90 mW. This architecture provides an efficient solution in terms of area and power consumption with very low complexity

Spectrum control and iterative coding for high capacity multiband OFDM

The emergence of Multiband Orthogonal Frequency Division Modulation (MB-OFDM) as an ultra-wideband (UWB) technology injected new optimism in the market through realistic commercial implementation, while keeping promise of high data rates intact. However, it has also brought with it host of issues, some of which are addressed in this thesis. The thesis primarily focuses on the two issues of spectrum control and user capacity for the system currently proposed by the Multiband OFDM Alliance (MBOA). By showing that line spectra are still an issue for new modulation scheme (MB-OFDM), it proposes a mechanism of scrambling the data with an increased length linear feedback shift register (compared to the current proposal), a new set of seeds, and random phase reversion for the removal of line spectra. Following this, the thesis considers a technique for increasing the user capacity of the current MB-OFDM system to meet the needs of future wireless systems, through an adaptive multiuser synchronous coded transmission scheme. This involves real time iterative generation of user codes, which are generated over time and frequency leading to increased capacity. With the assumption of complete channel state information (CSI) at the receiver, an iterative MMSE algorithm is used which involves replacement of each users s signature with its normalized MMSE filter function allowing the overall Total Squared Correlation (TSC) of the system to decrease until the algorithm converges to a fixed set of signature vectors. This allows the system to be overloaded and user\u27s codes to be quasi-orthogonal. Simulation results show that for code of length nine (spread over three frequency bands and three time slots), ten users can be accommodated for a given QoS and with addition of single frequency sub-band which allows the code length to increase from nine to twelve (four frequency sub-bands and three time slots), fourteen users with nearly same QoS can be accommodated in the system. This communication is overlooked by a central controller with necessary functionalities to facilitate the process. The thesis essentially considers the uplink from transmitting devices to this central controller. Furthermore, analysis of this coded transmission in presence of interference is carried to display the robustness of this scheme through its adaptation by incorporating knowledge of existing Narrowband (NB) Interference for computing the codes. This allows operation of sub-band coexisting with NB interference without substantial degradation given reasonable interference energy (SIR=-l0dB and -5dB considered). Finally, the thesis looks at design implementation and convergence issues related to code vector generation whereby, use of Lanczos algorithm is considered for simpler design and faster convergence. The algorithm can be either used to simplify design implementation by providing simplified solution to Weiner Hopf equation (without requiring inverse of correlation matrix) over Krylov subspace or can be used to expedite convergence by updating the signature sequence with eigenvector corresponding to the least eigenvalue of the signature correlation matrix through reduced rank eigen subspace search

Multiband OFDM for Cognitive Radio – A Way for Cyclostationary Detection and Interference Cancellation

With the tremendous growth in wireless technology there has been a shortage in the spectrum utilized for certain applications while some spectrum remains idle. To overcome this problem and for the efficient utilization of the spectrum cognitive radio is the suitable solution.Multiband OFDM can be easily modeled as cognitive radio, a technology that is employed for utilizing the available spectrum in the most efficient way. Since sensing of the free spectrum for detecting the arrival of the primary users is the foremost job of cognitive, here cyclostationary based spectrum sensing is carried out. Its performance is investigated using universal software defined radio peripheral (USRP) kit which is the hardware test bed for the cognitive radio system. Results are shown using Labview software. Further to mitigate the interference between the primary and cognitive users a modified intrusion elimination (AIC) algorithm had been proposed which in turn ensures the coexistence of both the users in the same wireless environment

A Study of Channel Estimation in Multi-Band OFDM UWB Systems

In this paper, the channel estimation techniques for multiband (MB) OFDM ultra-wideband (UWB) wireless communications are investigated. By combining orthogonal frequency-division multiplexing (OFDM) with multi-band, the MB-OFDM systems can capture multipath energy more efficiently than single-band direct sequence UWB (DS-UWB). However, most researches for UWB channel estimation are focused on the latter. Through the analysis of architecture, signal and channel model of MB-OFDM UWB wireless systems, we studied the channel estimation techniques based on preamble training sequences and pilot sub-carriers respectively. Further more, the linear estimations of least square (LS) and minimum mean square error (MMSE) are analysed and compared under different UWB channel conditions. The characteristic of estimation error changing with the SNR is also discussed. The estimation error includes the impact of interpolation error and channel noise

Multiple antenna system and channel estimation for multiband orthogonal frequency division multiplexing in ultra-wideband systems

Multiband Orthogonal Frequency Division Multiplexing (OFDM) has been deployed for practical implementation of low cost and low power Ultra-Wideband (UWB) devices due to its ability to mitigate the narrowband interference and multipath fading effects. In order to achieve high data rates, the deployment of multiple antenna techniques into a UWB system has gained considerable research interest. In a UWB system, both the spatial and multipath diversities exist in UWB system can be exploited via the use of Multiple-Input Multiple-Output (MIMO) antenna system and Space-Time Codes (STC) by leveraging Alamouti scheme. This work shows that MIMO system outperforms Alamouti technique in providing a power combining gain in the receiver. Given that channel estimation for timefrequency multiplexed such as a multiband OFDM system is unexplored largely, this thesis also addresses this issue. In literature, most of the conventional Channel Frequency Response (CFR) estimations require either pre-storing a large matrix or performing real-time matrix inversion. In general, these requirements are prohibitive for practical implementation of UWB devices. In this thesis, the implementation issues of STC-based on Alamouti scheme are investigated for the multiband OFDM system. The research quantifies and analyses existing channel estimation in frequency domain such as Least-Square (LS) and Minimum Mean Square Error (MMSE) techniques. Consequently, low-complexity channel estimation based on Singular Value Decomposition (SVD) technique is developed for multiband OFDM system evaluates under modified Saleh-Valuenzela (S-V) channel modelling represents the realistic wireless indoor environment. This work implies that the SVD technique gives an improvement of 3-5 dB compared to LS technique. Even though SVD performs similarly to MMSE, it managed to reduce significantly the complexity by or to 57.8%

System-level design and RF front-end implementation for a 3-10ghz multiband-ofdm ultrawideband receiver and built-in testing techniques for analog and rf integrated circuits

This work consists of two main parts: a) Design of a 3-10GHz UltraWideBand (UWB) Receiver and b) Built-In Testing Techniques (BIT) for Analog and RF circuits. The MultiBand OFDM (MB-OFDM) proposal for UWB communications has received significant attention for the implementation of very high data rate (up to 480Mb/s) wireless devices. A wideband LNA with a tunable notch filter, a downconversion quadrature mixer, and the overall radio system-level design are proposed for an 11-band 3.4-10.3GHz direct conversion receiver for MB-OFDM UWB implemented in a 0.25mm BiCMOS process. The packaged IC includes an RF front-end with interference rejection at 5.25GHz, a frequency synthesizer generating 11 carrier tones in quadrature with fast hopping, and a linear phase baseband section with 42dB of gain programmability. The receiver IC mounted on a FR-4 substrate provides a maximum gain of 67-78dB and NF of 5-10dB across all bands while consuming 114mA from a 2.5V supply. Two BIT techniques for analog and RF circuits are developed. The goal is to reduce the test cost by reducing the use of analog instrumentation. An integrated frequency response characterization system with a digital interface is proposed to test the magnitude and phase responses at different nodes of an analog circuit. A complete prototype in CMOS 0.35mm technology employs only 0.3mm2 of area. Its operation is demonstrated by performing frequency response measurements in a range of 1 to 130MHz on 2 analog filters integrated on the same chip. A very compact CMOS RF RMS Detector and a methodology for its use in the built-in measurement of the gain and 1dB compression point of RF circuits are proposed to address the problem of on-chip testing at RF frequencies. The proposed device generates a DC voltage proportional to the RMS voltage amplitude of an RF signal. A design in CMOS 0.35mm technology presents and input capacitance <15fF and occupies and area of 0.03mm2. The application of these two techniques in combination with a loop-back test architecture significantly enhances the testability of a wireless transceiver system

Design and implementation of frequency synthesizers for 3-10 ghz mulitband ofdm uwb communication

The allocation of frequency spectrum by the FCC for Ultra Wideband (UWB) communications in the 3.1-10.6 GHz has paved the path for very high data rate Gb/s wireless communications. Frequency synthesis in these communication systems involves great challenges such as high frequency and wideband operation in addition to stringent requirements on frequency hopping time and coexistence with other wireless standards. This research proposes frequency generation schemes for such radio systems and their integrated implementations in silicon based technologies. Special emphasis is placed on efficient frequency planning and other system level considerations for building compact and practical systems for carrier frequency generation in an integrated UWB radio. This work proposes a frequency band plan for multiband OFDM based UWB radios in the 3.1-10.6 GHz range. Based on this frequency plan, two 11-band frequency synthesizers are designed, implemented and tested making them one of the first frequency synthesizers for UWB covering 78% of the licensed spectrum. The circuits are implemented in 0.25µm SiGe BiCMOS and the architectures are based on a single VCO at a fixed frequency followed by an array of dividers, multiplexers and single sideband (SSB) mixers to generate the 11 required bands in quadrature with fast hopping in much less than 9.5 ns. One of the synthesizers is integrated and tested as part of a 3-10 GHz packaged receiver. It draws 80 mA current from a 2.5 V supply and occupies an area of 2.25 mm2. Finally, an architecture for a UWB synthesizer is proposed that is based on a single multiband quadrature VCO, a programmable integer divider with 50% duty cycle and a single sideband mixer. A frequency band plan is proposed that greatly relaxes the tuning range requirement of the multiband VCO and leads to a very digitally intensive architecture for wideband frequency synthesis suitable for implementation in deep submicron CMOS processes. A design in 130nm CMOS occupies less than 1 mm2 while consuming 90 mW. This architecture provides an efficient solution in terms of area and power consumption with very low complexity

Channel-based antenna synthesis for improved in-vehicle UWB MB-OFDM communications

Ultra-wide band (UWB) is an attractive technology for innovative in-vehicle wireless communications requiring high data rates and multiband orthogonal frequency division multiplexing (MB-OFDM) a suitable scheme for the accomplishment due to its high performance, low-power and low-cost characteristics. To contribute toward improved UWB MB-OFDM communications inside vehicles, a channel-based antenna synthesis technique to customise in-vehicle UWB antennas that reduce ‘blind spots’ in the communication channel is proposed and presented. For the realisation, a comprehensive analysis was utilised and comprised an in-car channel evaluation including bit-error-rate (BER) estimations and radiation pattern-and-source syntheses. The channel was measured using a standard antenna to set up the base of the experiments and the distribution of the impulse responses and signal-to-noise ratios in the vehicle's passenger plane shown. The currently available IEEE 802.15.3a channel models were perceived unrealistic for the in-vehicle application and the reason for measuring the channel practically. Using these specific channel measurements, the synthesised pattern is unveiled and consequently the channel-based antenna synthesis technique used to predict the antenna source. The antenna with optimised pattern-and-source showed an improved BER performance compared with the standard antenna in this application; that is, a figure of merit of 37.73% minimised ‘blind spots’