Energy analysis and optimisation techniques for automatically synthesised coprocessors

The primary outcome of this research project is the development of a methodology enabling fast automated early-stage power and energy analysis of configurable processors for system-on-chip platforms. Such capability is essential to the process of selecting energy efficient processors during design-space exploration, when potential savings are highest. This has been achieved by developing dynamic and static energy consumption models for the constituent blocks within the processors. Several optimisations have been identified, specifically targeting the most significant blocks in terms of energy consumption. Instruction encoding mechanism reduces both the energy and area requirements of the instruction cache; modifications to the multiplier unit reduce energy consumption during inactive cycles. Both techniques are demonstrated to offer substantial energy savings. The aforementioned techniques have undergone detailed evaluation and, based on the positive outcomes obtained, have been incorporated into Cascade, a system-on-chip coprocessor synthesis tool developed by Critical Blue, to provide automated analysis and optimisation of processor energy requirements. This thesis details the process of identifying and examining each method, along with the results obtained. Finally, a case study demonstrates the benefits of the developed functionality, from the perspective of someone using Cascade to automate the creation of an energy-efficient configurable processor for system-on-chip platforms

Digital implementation of the cellular sensor-computers

Two different kinds of cellular sensor-processor architectures are used nowadays in various applications. The first is the traditional sensor-processor architecture, where the sensor and the processor arrays are mapped into each other. The second is the foveal architecture, in which a small active fovea is navigating in a large sensor array. This second architecture is introduced and compared here. Both of these architectures can be implemented with analog and digital processor arrays. The efficiency of the different implementation types, depending on the used CMOS technology, is analyzed. It turned out, that the finer the technology is, the better to use digital implementation rather than analog

A Modular Approach to Adaptive Reactive Streaming Systems

The latest generations of FPGA devices offer large resource counts that provide the headroom to implement large-scale and complex systems. However, there are increasing challenges for the designer, not just because of pure size and complexity, but also in harnessing effectively the flexibility and programmability of the FPGA. A central issue is the need to integrate modules from diverse sources to promote modular design and reuse. Further, the capability to perform dynamic partial reconfiguration (DPR) of FPGA devices means that implemented systems can be made reconfigurable, allowing components to be changed during operation. However, use of DPR typically requires low-level planning of the system implementation, adding to the design challenge. This dissertation presents ReShape: a high-level approach for designing systems by interconnecting modules, which gives a ‘plug and play’ look and feel to the designer, is supported by tools that carry out implementation and verification functions, and is carried through to support system reconfiguration during operation. The emphasis is on the inter-module connections and abstracting the communication patterns that are typical between modules – for example, the streaming of data that is common in many FPGA-based systems, or the reading and writing of data to and from memory modules. ShapeUp is also presented as the static precursor to ReShape. In both, the details of wiring and signaling are hidden from view, via metadata associated with individual modules. ReShape allows system reconfiguration at the module level, by supporting type checking of replacement modules and by managing the overall system implementation, via metadata associated with its FPGA floorplan. The methodology and tools have been implemented in a prototype for a broad domain-specific setting – networking systems – and have been validated on real telecommunications design projects

Reification: A Process to Configure Java Realtime Processors

Real-time systems require stringent requirements both on the processor and the software application. The primary concern is speed and the predictability of execution times. In all real-time applications the developer must identify and calculate the worst case execution times (WCET) of their software. In almost all cases the processor design complexity impacts the analysis when calculating the WCET. Design features which impact this analysis include cache and instruction pipelining. With both cache and pipelining the time taken for a particular instruction can vary depending on cache and pipeline contents. When calculating the WCET the developer must ignore the speed advantages from these enhancements and use the normal instruction timings. This investigation is about a Java processor targeted to run within an FPGA environment (Java soft chip) supporting Java real-time applications. The investigation focuses on a simple processor design that allows simple analysis of WCET. The processor design has no cache and no instruction pipeline enhancements yet achieves higher performance than existing designs with these enhancements. The investigation centers on a process that translates Java byte codes and folds these translated codes into a modified Harvard Micro Controller (HMC). The modifications include better alignment with the application code and take advantage of the FPGA’s parallel capability. A prototyped ontology is used where the top level categories defined by Sowa are expanded to support the process. The proposed HMC and process are used to produce investigation results. Performance testing using the Sobel edge detection algorithm is used to compare the results with the only Java processor claiming real-time abilities

C-MOS array design techniques: SUMC multiprocessor system study

The current capabilities of LSI techniques for speed and reliability, plus the possibilities of assembling large configurations of LSI logic and storage elements, have demanded the study of multiprocessors and multiprocessing techniques, problems, and potentialities. Evaluated are three previous systems studies for a space ultrareliable modular computer multiprocessing system, and a new multiprocessing system is proposed that is flexibly configured with up to four central processors, four 1/0 processors, and 16 main memory units, plus auxiliary memory and peripheral devices. This multiprocessor system features a multilevel interrupt, qualified S/360 compatibility for ground-based generation of programs, virtual memory management of a storage hierarchy through 1/0 processors, and multiport access to multiple and shared memory units

Behavioral synthesis from VHDL using structured modeling

This dissertation describes work in behavioral synthesis involving the development of a VHDL Synthesis System VSS which accepts a VHDL behavioral input specification and performs technology independent synthesis to generate a circuit netlist of generic components. The VHDL language is used for input and output descriptions. An intermediate representation which incorporates signal typing and component attributes simplifies compilation and facilitates design optimization.A Structured Modeling methodology has been developed to suggest standard VHDL modeling practices for synthesis. Structured modeling provides recommendations for the use of available VHDL description styles so that optimal designs will be synthesized.A design composed of generic components is synthesized from the input description through a process of Graph Compilation, Graph Criticism, and Design Compilation. Experiments were performed to demonstrate the effects of different modeling styles on the quality of the design produced by VSS. Several alternative VHDL models were examined for each benchmark, illustrating the improvements in design quality achieved when Structured Modeling guidelines were followed

Preliminary candidate advanced avionics system for general aviation

An integrated avionics system design was carried out to the level which indicates subsystem function, and the methods of overall system integration. Sufficient detail was included to allow identification of possible system component technologies, and to perform reliability, modularity, maintainability, cost, and risk analysis upon the system design. Retrofit to older aircraft, availability of this system to the single engine two place aircraft, was considered