5 research outputs found
Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols
In this paper, we describe direct-sequence code-division multiple-access
(DS-CDMA) systems with quadriphase-shift keying in which channel estimation,
coherent demodulation, and decoding are iteratively performed without the use
of any training or pilot symbols. An expectation-maximization
channel-estimation algorithm for the fading amplitude, phase, and the
interference power spectral density (PSD) due to the combined interference and
thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate
codes. After initial estimates of the fading amplitude, phase, and interference
PSD are obtained from the received symbols, subsequent values of these
parameters are iteratively updated by using the soft feedback from the channel
decoder. The updated estimates are combined with the received symbols and
iteratively passed to the decoder. The elimination of pilot symbols simplifies
the system design and allows either an enhanced information throughput, an
improved bit error rate, or greater spectral efficiency. The interference-PSD
estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication
EM-Based iterative channel estimation and sequence detection for space-time coded modulation
Reliable detection of signals transmitted over a wireless communication channel requires knowledge of the channel estimate. In this work, the application of expectationmaximization (EM) algorithm to estimation of unknown channel and detection of space-time coded modulation (STCM) signals is investigated. An STCM communication system is presented which includes symbol interleaving at the transmitter and iterative EM-based soft-output decoding at the receiver. The channel and signal model are introduced with a quasi-static and time-varying Rayleigh fading channels considered to evaluate the performance of the communication system. Performance of the system employing Kalman filter with per-survivor processing to do the channel estimation and Viterbi algorithm for sequence detection is used as a reference.
The first approach to apply the EM algorithm to channel estimation presents a design of an online receiver with sliding data window. Next, a block-processing EM-based iterative receiver is presented which utilizes soft values of a posteriori probabilities (APP) with maximum a posteriori probability (MAP) as the criterion of optimality in both: detection and channel estimation stages (APP-EM receiver). In addition, a symbol interleaver is introduced at the transmitter which has a great desirable impact on system performance. First, it eliminates error propagation between the detection and channel estimation stages in the receiver EM loop. Second, the interleaver increases the diversity advantage to combat deep fades of a fast fading channel.
In the first basic version of the APP-EM iterative receiver, it is assumed that noise variance at the receiver input is known. Then a modified version of the receiver is presented where such assumption is not made. In addition to sequence detection and channel estimation, the EM iteration loop includes the estimation of unknown additive white Gaussian noise variance.
Finally, different properties of the APP-EM iterative receiver are investigated including the effects of training sequence length on system performance, interleaver and channel correlation length effects and the performance of the system at different Rayleigh channel fading rates
Recommended from our members
Intelligent joint channel parameter estimation techniques for mobile wireless positioning applications
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Mobile wireless positioning has recently received great attention. For mobile wireless
communication networks, an inherently suitable approach is to obtain the parameters
that are used for positioning estimates from the radio signal measurements between a
mobile device and one or more xed base stations. However, obtaining accurate estimates of these location-dependent channel parameters is a challenging task. The focus of this thesis is on the estimation of these channel parameters for mobile wireless positioning
applications. In particular, we investigate novel estimators that jointly estimate
more than one type of channel parameters. We rst perform a comprehensive critical
review on the most recent and popular joint channel parameter estimation techniques.
Secondly, we improve a state-of-the-art technique, namely the Space Alternating Generalised Expectation maximisation (SAGE) algorithm by employing adaptive interference
cancellation to improve the estimation accuracy of weaker paths. Thirdly, a novel intelligent channel parameter estimation technique using Evolution Strategy (ES) is proposed to overcome the drawbacks of the existing iterative maximum likelihood methods. Furthermore, given that in reality it is di cult to obtain the number of multipath in advance, we propose a two tier Hierarchically Organised ES to jointly estimate the number of multipath as well as the channel parameters. Finally, we extend the proposed ES method to further estimate the Doppler shift in mobile environments. Our proposed intelligent joint channel estimation techniques are shown to exhibit excellent performance even with low Signal to Noise Ratio (SNR) channel conditions as well as robust against uncertainties in initialisations.EPSRC and Cambridge Silicon Radi
Channel estimation for SISO and MIMO OFDM communications systems.
Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2010.Telecommunications in the current information age is increasingly relying on the wireless link. This is because wireless communication has made possible a variety of services ranging from voice to data and now to multimedia. Consequently, demand for new wireless capacity is growing rapidly at a very alarming rate. In a bid to cope with challenges of increasing demand for higher data rate, better quality of service, and higher network capacity, there is a migration from Single Input Single Output (SISO) antenna technology to a more promising Multiple Input Multiple Output (MIMO) antenna technology. On the other hand, Orthogonal Frequency Division Multiplexing (OFDM) technique has emerged as a very popular multi-carrier modulation technique to combat the problems associated with physical properties of the wireless channels such as multipath fading, dispersion, and interference. The combination of MIMO technology with OFDM techniques, known as MIMO-OFDM Systems, is considered as a promising solution to enhance the data rate of future broadband wireless communication Systems. This thesis addresses a major area of challenge to both SISO-OFDM and MIMO-OFDM Systems; estimation of accurate channel state information (CSI) in order to make possible coherent detection of the transmitted signal at the receiver end of the system. Hence, the first novel contribution of this thesis is the development of a low complexity adaptive algorithm that is robust against both slow and fast fading channel scenarios, in comparison with other algorithms employed in literature, to implement soft iterative channel estimator for turbo equalizer-based receiver for single antenna communication Systems. Subsequently, a Fast Data Projection Method (FDPM) subspace tracking algorithm is adapted to derive Channel Impulse Response Estimator for implementation of Decision Directed Channel Estimation (DDCE) for Single Input Single Output - Orthogonal Frequency Division Multiplexing (SISO-OFDM) Systems. This is implemented in the context of a more realistic Fractionally Spaced-Channel Impulse Response (FS-CIR) channel model, as against the channel characterized by a Sample Spaced-Channel Impulse Response (SS)-CIR widely assumed by other authors. In addition, a fast convergence Variable Step Size Normalized Least Mean Square (VSSNLMS)-based predictor, with low computational complexity in comparison with others in literatures, is derived for the implementation of the CIR predictor module of the DDCE scheme. A novel iterative receiver structure for the FDPM-based Decision Directed Channel Estimation scheme is also designed for SISO-OFDM Systems. The iterative idea is based on Turbo iterative principle. It is shown that improvement in the performance can be achieved with the iterative DDCE scheme for OFDM system in comparison with the non iterative scheme. Lastly, an iterative receiver structure for FDPM-based DDCE scheme earlier designed for SISO OFDM is extended to MIMO-OFDM Systems. In addition, Variable Step Size Normalized Least Mean Square (VSSNLMS)-based channel transfer function estimator is derived in the context of MIMO Channel for the implementation of the CTF estimator module of the iterative Decision Directed Channel Estimation scheme for MIMO-OFDM Systems in place of linear minimum mean square error (MMSE) criterion. The VSSNLMS-based channel transfer function estimator is found to show improved MSE performance of about -4 MSE (dB) at SNR of 5dB in comparison with linear MMSE-based channel transfer function estimator