InSb charge coupled infrared imaging device: The 20 element linear imager

The design and fabrication of the 8585 InSb charge coupled infrared imaging device (CCIRID) chip are reported. The InSb material characteristics are described along with mask and process modifications. Test results for the 2- and 20-element CCIRID's are discussed, including gate oxide characteristics, charge transfer efficiency, optical mode of operation, and development of the surface potential diagram

Design, processing and testing of LSI arrays hybrid microelectronics task

Those factors affecting the cost of electronic subsystems utilizing LSI microcircuits were determined and the most efficient methods for low cost packaging of LSI devices as a function of density and reliability were developed

Evaluating the End-User Experience of Private Browsing Mode

Nowadays, all major web browsers have a private browsing mode. However, the mode's benefits and limitations are not particularly understood. Through the use of survey studies, prior work has found that most users are either unaware of private browsing or do not use it. Further, those who do use private browsing generally have misconceptions about what protection it provides. However, prior work has not investigated \emph{why} users misunderstand the benefits and limitations of private browsing. In this work, we do so by designing and conducting a three-part study: (1) an analytical approach combining cognitive walkthrough and heuristic evaluation to inspect the user interface of private mode in different browsers; (2) a qualitative, interview-based study to explore users' mental models of private browsing and its security goals; (3) a participatory design study to investigate why existing browser disclosures, the in-browser explanations of private browsing mode, do not communicate the security goals of private browsing to users. Participants critiqued the browser disclosures of three web browsers: Brave, Firefox, and Google Chrome, and then designed new ones. We find that the user interface of private mode in different web browsers violates several well-established design guidelines and heuristics. Further, most participants had incorrect mental models of private browsing, influencing their understanding and usage of private mode. Additionally, we find that existing browser disclosures are not only vague, but also misleading. None of the three studied browser disclosures communicates or explains the primary security goal of private browsing. Drawing from the results of our user study, we extract a set of design recommendations that we encourage browser designers to validate, in order to design more effective and informative browser disclosures related to private mode

Assistive technology pricing: is it fair and reasonable?

Concerns about the price of assistive technology products (AT, also known as aids and equipment) arise regularly in public policy discourse and the media. These papers present the available evidence and essential contextual information regarding AT pricing in Australia.  Overview Concerns about the price of assistive technology products arise regularly in public policy discourse and the media. With the implementation of the National Disability Insurance Scheme and the Aged Care Reforms, clarity about the fairness (or not) of existing AT retail prices is central to ensuring effective AT public policy development and implementation for the one in ten Australians who rely on AT to do everyday tasks that others take for granted. Available evidence indicates that while AT can be expensive, it is in fact cheaper in Australia than in other comparable countries. Effective price comparisons require comparing like-with-like, not only in relation to the product but also services and other costs that are incorporated into retail prices. The Queensland Competition Authority recently compared like-with-like AT prices and found Australia was 24% lower than the best available overseas price when transportation to Australia was included in the calculation.  ATSA price comparisons using a different method produced similar results with Australian prices on average between 14-27% cheaper. Notwithstanding the general impression that the AT industry is about \u27aids and equipment, hardware and gadgets\u27, it is largely a service-based industry with an extensive range of services aimed at ensuring a good match between the individual and their AT incorporated into the retail price. The extent of these services is described in detail in the background paper. Yes, consumers can buy AT on the internet from internet-only AT sellers in the USA for about half the price of purchasing through a retail shop-front in Australia, but when transportation costs are factored in along with the lack of coverage by Australia\u27s strong consumer protection laws, the difficulty and costs of enforcing overseas warranties, and the purchaser carrying all responsibility for ensuring appropriateness of the AT for their needs; assembly/adjustment/customisation; sourcing spares, maintenance and repairs; training in safe use, etc. these may not be the bargains they appear to be. Particularly in relation to more complex AT such as a light-weight customised manual wheelchair for a very active person, a motorised wheelchair with customised seating and complex controls, or even something \u27simpler\u27 such as a hoist to help someone get in and out of bed, or a pressure care cushion, AT retailers typically trial and test a variety of products and options with the consumer and their therapist, with free in-home trials over a period of days or weeks commonplace to ensure the best available solution is achieved

Electrical termination techniques

A technical review of high reliability electrical terminations for electronic equipment was made. Seven techniques were selected from this review for further investigation, experimental work, and preliminary testing. From the preliminary test results, four techniques were selected for final testing and evaluation. These four were: (1) induction soldering, (2) wire wrap, (3) percussive arc welding, and (4) resistance welding. Of these four, induction soldering was selected as the best technique in terms of minimizing operator errors, controlling temperature and time, minimizing joint contamination, and ultimately producing a reliable, uniform, and reusable electrical termination

Shuttle Ground Operations Efficiencies/Technologies (SGOE/T) study. Volume 2: Ground Operations evaluation

The Ground Operations Evaluation describes the breath and depth of the various study elements selected as a result of an operational analysis conducted during the early part of the study. Analysis techniques used for the evaluation are described in detail. Elements selected for further evaluation are identified; the results of the analysis documented; and a follow-on course of action recommended. The background and rationale for developing recommendations for the current Shuttle or for future programs is presented

Product assurance technology for custom LSI/VLSI electronics

The technology for obtaining custom integrated circuits from CMOS-bulk silicon foundries using a universal set of layout rules is presented. The technical efforts were guided by the requirement to develop a 3 micron CMOS test chip for the Combined Release and Radiation Effects Satellite (CRRES). This chip contains both analog and digital circuits. The development employed all the elements required to obtain custom circuits from silicon foundries, including circuit design, foundry interfacing, circuit test, and circuit qualification

Digitally modulated bit error rate measurement system for microwave component evaluation

The NASA Lewis Research Center has developed a unique capability for evaluation of the microwave components of a digital communication system. This digitally modulated bit-error-rate (BER) measurement system (DMBERMS) features a continuous data digital BER test set, a data processor, a serial minimum shift keying (SMSK) modem, noise generation, and computer automation. Application of the DMBERMS has provided useful information for the evaluation of existing microwave components and of design goals for future components. The design and applications of this system for digitally modulated BER measurements are discussed

Return to Traffic of Full Depth Reclamation Pavements

Full-Depth Reclamation (FDR) is a cost-effective rehabilitation treatment for deteriorated pavements. However, when using asphalt emulsion based rehabilitation techniques one of the most challenging aspects of FDR is determining when traffic can be returned to the rehabilitated pavement surface. Since asphalt emulsion mixtures need ample time for curing, they cannot be sealed with a surface layer until the water has evaporated from the rehabilitated layer. It is often not possible to keep the road closed until all of the water has evaporated and the surface layer is placed, therefore, at some point the traffic needs to be returned to the rehabilitated surface. Determining when this point occurs, however, is still unclear. A laboratory raveling test run on Superpave Gyratory Compactor prepared samples simulates the raveling that can occur on the newly recycled pavement, and will be used in conjunction with inexpensive, simple tests that can be used in the field by agencies and contractors to determine if traffic can be released without causing damage to the rehabilitated pavement surface. Three mix designs were analyzed and used in conjunction to produce the emulsion and foam samples used in the testing. An optimum emulsion content was found and used to produce all of the samples. Based on a review of literature and an evaluation of practicality, four tests are recommended to be modeled for field use: British Pendulum Tester, Dynamic Friction Tester, a field-scale cohesiometer, and a rebound tester. The in-house testers were put through numerous tests on asphalt emulsion and asphalt foam samples. It was decided that of all of the testers, the one that showed the most potential was the Sweep Tester. Alterations to improve the devices were stated after all of the testing was completed