Ion-acoustic solitary waves and shocks in a collisional dusty negative ion plasma

We study the effects of ion-dust collisions and ion kinematic viscosities on the linear ion-acoustic instability as well as the nonlinear propagation of small amplitude solitary waves and shocks (SWS) in a negative ion plasma with immobile charged dusts. {The existence of two linear ion modes, namely the `fast' and `slow' waves is shown, and their properties are analyzed in the collisional negative ion plasma.} {Using the standard reductive perturbation technique, we derive a modified Korteweg-de Vries-Burger (KdVB) equation which describes the evolution of small amplitude SWS.} {The profiles of the latter are numerically examined with parameters relevant for laboratory and space plasmas where charged dusts may be positively or negatively charged.} It is found that negative ion plasmas containing positively charged dusts support the propagation of SWS with negative potential. However, the perturbations with both positive and negative potentials may exist when dusts are negatively charged. The results may be useful for the excitation of SWS in laboratory negative ion plasmas as well as for observation in space plasmas where charged dusts may be positively or negatively charged.Comment: 13 pages, 9 figures; To appear in Physical Review

Microscopic and chemical studies of metal particulates in tree bark and attic dust : evidence for historical atmospheric smelter emissions, Humberside, UK.

Tree barks and attic dusts were examined as historical archives of smelter emissions, with the aim of elucidating the pathways of pollution associated with a plume of Sn and Pb contamination in top soils, found close to the former Capper Pass smelter, Humberside, UK. Samples were collected from three villages within the area of the contamination plume. Scanning Electron Microscopy (SEM) and bulk chemical analyses were used to assess particle type, number and deposition patterns. SEM analysis of dusts and bark revealed that Sn and Pb particles were present in samples from all three villages along with copper, zinc and iron particles. These were almost entirely <10 m in diameter and occurred mostly as oxides, frequently forming clusters of sub-micron crystals. Samples further from the smelter contained considerably fewer particles. We present images of smelter derived Sn particles. Chemical assays of the barks and attic dusts demonstrated that concentrations of Sn, Pb, Cu, As, Sb and Cd diminished with increasing distance from the source. Strong positive correlations were found between Sn and Pb, As, Sb and Cd in the attic dusts. Enrichment Factors (EF) were calculated for these trace elements based on topsoil element concentrations obtained from the soil survey of the study area. Decreases in these trace element concentrations and EF values with distance away from the smelter are consistent with trends found in the soil survey for Sn and Pb and are typical of deposition patterns around smelter stacks. The study demonstrates that tree bark and attic dusts can be effective archives of metal particulates deposited from large static emission sources

A comparison of the results from intra-pleural and intra-peritoneal studies with those from inhalation and intratracheal tests for the assessment of pulmonary responses to inhalable dusts and fibres.

The aim of this paper is to compare results from inhalation studies with those from intraperitoneal and intrapleural tests, where available, for a number of fibrous and particulate test materials. The objective is to determine how well intraperitoneal/intrapleural studies predict the pathological responses observed in more standard in vivo studies of pulmonary toxicity, with a particular focus on carcinogenicity. Published toxicity data was obtained for a number of materials including asbestos, wollastonite, MMVFs (including glass fibres, stone wools and RCF), silicon carbide whiskers, potassium octatitanate, quartz, kevlar, polypropylene and titanium dioxide. For some of the fibrous material reviewed, there is conformity between the results of intraperitoneal and inhalation tests such that they are either consistently positive or consistently negative. For the remaining fibrous materials reviewed, intraperitoneal and inhalation tests give different results, with positive results in the intraperitoneal test not being reflected by positive inhalation results. It is suggested that the intraperitoneal test can be used to exonerate a dust or fibre (because if negative in the intraperitoneal test it is extremely unlikely to be positive in either inhalation or intratracheal tests) but should not be used to positively determine that a dust or fibre is carcinogenic by inhalation. We would argue against the use of intraperitoneal tests for human health risk assessment except perhaps for the purpose of exoneration of a material from classification as a carcinogen.Peer reviewedFinal Accepted Versio

Optimization of Plasma Plume Characteristics Based on Multi-anode Coaxial Ablative Pulsed Plasma Thruster

A special surface discharge is proposed based on the multi-anode electrode geometry. Instead of the traditional surface flashover of creepage on the insulator surface between the electrodes, a surface discharge with one of the electrodes being placed far away from the insulator is achieved in this paper. The unique electric field distribution due to the multi-anode electrode geometry has a significant influence on the discharge process of the surface discharge. It changes the generation and propagation process of the plasma, forming a plasma plume contributes to the propulsion performance of the thruster. Through theoretical analysis of the obtained plume data, it is indicated that the ablative pulsed plasma thruster based on multi-anode electrode geometry (short for multi-anode APPT) promotes the internal pressure of the plasma jet during its propagation and significantly increases the density and energy of charged particles. The discharge phenomena manifest that the multi-anode APPT and the helix-coil multi-anode APPT effectively increase the intensity of the plasma plume. Through electron density spatial distribution measurement, it has been found that the helix-coil multi-anode APPT increases the density of plasma in the axial direction to more than 4 times of the conventional coaxial APPT and reduces the electron density in other directions. In the propulsion test, it has been demonstrated that the multi-anode APPT and the helix-coil multi-anode APPT have better performance in terms of the impulse bit and the thrust-to-power ratio. In addition, it is also identified that the pinch effect will be enhanced with the increase of discharge power and the propulsion performance is promoted more distinctly. The multi-anode APPT and the helixcoil multi-anode APPT have been proved to have potential application advantage in the field of micro-satellite propulsion.Comment: 12 pages, 12 figure

The Surprising History and Geography of the First "Organic Farming" Association

Readers of narratives of the history of organic farming in Australia will be familiar with such accounts beginning in the "1980s". In questing after the earliest organic farming society, and more particularly in pursuing the spread of the "organic" meme from its 1940 birth in Britain, it was therefore a great surprise to uncover the Australian Organic Faming and Gardening Society (AOFGS) founded in October 1944. This appears to be the world's first "organic farming" association. It also resets the organic clock for Australia back by four decades. Here was an association, pre-dating the UK Soil Association by two years, formed half a world away from the birthplace of "organic", in a country at war, under food rationing, and with its workforce under Manpower regulations. Yet organic farming principles were clearly articulated by this Society, perhaps as clearly articulated as they have ever been, and particularised for Australia. The Society was constrained from publishing their journal due to wartime constraints on paper. The first appearance of the Organic Farming Digest (OFD) was in April 1946. Thereafter, for nearly a decade, the Society regularly published a journal, with the last issue appearing in 1954. This paper explores the Society; its principles; its journals; its people; its interactions with key organic figures of the time including Ehrenfried Pfeiffer, Eve Balfour, Albert Howard, and Jerome Rodale; its Australian contributors from five states, including Colonel Harold White and Professor Sir Stanton Hicks; its progress and ultimately its demise; and touch on how this history became lost

Preliminary Research on Granulation Process of Dust Waste from Reclamation Process of Moulding Sands with Furan Resin

The results of investigations of the granulation process of foundry dusts generated in the dry mechanical reclamation process of usedsands, where furan resins were binders are presented in the paper. Investigations concerned producing of granules of the determineddimensions and strength parameters.Granules were formed from the dusts mixture consisting in 50 mass% of dusts obtained after the reclamation of the furane sands and in50 mass % of dusts from sands with bentonite. Dusts from the bentonite sands with water were used as a binder allowing the granulation of after reclamation dusts from the furane sands.The following parameters of the ready final product were determined: moisture content (W), shatter test of granules (Wz) performeddirectly after the granulation process and after 1, 3, 5, 10 days and nights of seasoning, water-resistance of granules after 24 hours of being immersed in water, surface porosity ep and volumetric porosity ev. In addition the shatter test and water-resistance of granulate dried at a temperature of 105oC were determined.Investigations were performed at the bowl angle of inclination 45o, for three rotational speeds of the bowl being: 10, 15, 20 rpm.For the speed of 10 rpm the granulation tests of dusts mixture after the preliminary mixing in the roller mixer and with the addition ofwater-glass in the amount of 2% in relation to the amount of dust were carried out.The obtained results indicate that the granulator allows to obtain granules from dusts originated from the reclamations of mouldingsands with the furane resin with an addition of dusts from the bentonite sands processing plants

A new sighting study for the fixed concentration procedure to allow for gender differences

The fixed concentration procedure (FCP) has been proposed as an alternative to the median lethal concentration (LC50) test (organisation for economic co-operation and development (OECD) test guideline [TG] 403) for the assessment of acute inhalation toxicity. The FCP tests animals of a single gender (usually females) at a number of fixed concentration levels in a sequential fashion. It begins with a sighting study that precedes the main FCP study and is used to determine the main study starting concentration. In this paper, we propose a modification to the sighting study and suggest that it should be conducted using both male and female animals, rather than just animals of a single gender. Statistical analysis demonstrates that, when females are more sensitive, the new procedure is likely to give the same classification as the original FCP, whereas, if males are more sensitive, the new procedure is much less likely to lead to incorrect classification into a less toxic category. If there is no difference in the LC50 for females and males, the new procedure is slightly more likely to classify into a more stringent class than the original FCP. Overall, these results show that the revised sighting study ensures gender differences in sensitivity do not significantly impact on the performance of the FCP, supporting its use as an alternative test method for assessing acute inhalation toxicity