79 research outputs found
FBMC system: an insight into doubly dispersive channel impact
It has been claimed that filter bank multicarrier (FBMC) systems suffer from negligible performance loss caused by moderate dispersive channels in the absence of guard time protection between symbols. However, a theoretical and systematic explanation/analysis for the statement is missing in the literature to date. In this paper, based on one-tap minimum mean square error (MMSE) and zero-forcing (ZF) channel equalizations, the impact of doubly dispersive channel on the performance of FBMC systems is analyzed in terms of mean square error of received symbols. Based on this analytical framework, we prove that the circular convolution property between symbols and the corresponding channel coefficients in the frequency domain holds loosely with a set of inaccuracies. To facilitate analysis, we first model the FBMC system in a vector/matrix form and derive the estimated symbols as a sum of desired signal, noise, intersymbol interference (ISI), intercarrier interference (ICI), interblock interference (IBI), and estimation bias in the MMSE equalizer. Those terms are derived one-by-one and expressed as a function of channel parameters. The numerical results reveal that under harsh channel conditions, e.g., with large Doppler spread or channel delay spread, the FBMC system performance may be severely deteriorated and error floor will occur
Single- versus Multi-Carrier Terahertz-Band Communications: A Comparative Study
The prospects of utilizing single-carrier (SC) and multi-carrier (MC)
waveforms in future terahertz (THz)-band communication systems remain
unresolved. On the one hand, the limited multi-path components at high
frequencies result in frequency-flat channels that favor low-complexity
wideband SC systems. On the other hand, frequency-dependent molecular
absorption and transceiver characteristics and the existence of multi-path
components in indoor sub-THz systems can still result in frequency-selective
channels, favoring off-the-shelf MC schemes such as orthogonal
frequency-division multiplexing (OFDM). Variations of SC/MC designs result in
different THz spectrum utilization, but spectral efficiency is not the primary
concern with substantial available bandwidths; baseband complexity, power
efficiency, and hardware impairment constraints are predominant. This paper
presents a comprehensive study of SC/MC modulations for THz communications,
utilizing an accurate wideband THz channel model and highlighting the various
performance and complexity trade-offs of the candidate schemes. Simulations
demonstrate that discrete-Fourier-transform spread orthogonal time-frequency
space (DFT-s-OTFS) achieves a lower peak-to-average power ratio (PAPR) than
OFDM and OTFS and enhances immunity to THz impairments and Doppler spreads, but
at an increased complexity cost. Moreover, DFT-s-OFDM is a promising candidate
that increases robustness to THz impairments and phase noise (PHN) at a low
PAPR and overall complexity.Comment: 18 pages, 12 figures, journa
Scattered Pilot-Based Channel Estimation for Channel Adaptive FBMC-OQAM Systems
Shaping the pulse of FilterBank MultiCarrier with Offset Quadrature Amplitude Modulation subcarrier modulation (FBMC-OQAM) systems offers a new degree of freedom for the design of mobile communication systems. In previous studies, we evaluated the gains arising from the application of Prototype Filter Functions (PFFs) and subcarrier spacing matched to the delay and Doppler spreads of doubly dispersive channels. In this paper, we investigate the impact of having imperfect channel knowledge at the receiver on the performance of Channel Adaptive Modulation (CAM) in terms of channel estimation errors and Bit Error Rate (BER). To this end, the channel estimation error for two different interference mitigation schemes proposed in the literature is derived analytically and its influence on the BER performance is analyzed for practical channel scenarios. The results show that FBMC-OQAM systems utilizing CAM and scattered pilot-based channel estimation provide a significant performance gain compared with the current one system design for a variety of channel scenarios ("one-fits-all") approach. Additionally, we verified that the often used assumption of a flat channel in the direct neighborhood of a pilot symbol is not valid for practical scenarios. © 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works
- …