Influence of longswing technique on the kinematics and key release parameters of the straddle Tkachev on uneven bars

Tkachev on uneven bars is a release and re-grasp skill performed using variations of preparatory longswing techniques; the reasons why different techniques are chosen remains unclear. This study examined kinematic and key release parameters specific to three distinct techniques with the aim of understanding the relative benefits of each. During two international artistic gymnastics competitions six arch, straddle and pike longswings preceding the straddle Tkachev were recorded using twin video cameras. Calibration and movement images were digitised and reconstructed using 3D DLT. Shoulder and hip angular kinematics, angular momentum and key release parameters were compared between techniques. In the arch longswing, the first and second hip functional phases began significantly earlier than the straddle or pike. No significant differences were established for release parameters although large effect sizes for horizontal release velocity and angular momenta about the mass centre and bar were reported between the arch and other two variants. Therefore, the arch variant may provide the opportunity to develop more complex combinations following the Tkachev. Providing insight into mechanical advantages of specific longswing techniques, and highlighting those that elicit desirable characteristics offers the potential to provide coaches with objective data on technique selection and ultimately skill development

Functional phases and angular momentum characteristics of Tkatchev and Kovacs

Understanding the technical requirements and underlying biomechanics of complex release and re-grasp skills on high bar allows coaches and scientists to develop safe and effective training programmes. The aim of this study was to examine the differences in the functional phases between the Tkatchev and Kovacs skills and to explain how the angular momentum demands are addressed. Images of 18 gymnasts performing 10 Tkatchevs and 8 Kovacs at the Olympic Games were recorded (50 Hz), digitised and reconstructed (3D Direct Linear Transformation). Orientation of the functional phase action, defined by the rapid flexion to extension of the shoulders and extension to flexion of the hips as the performer passed through the lower vertical, along with shoulder and hip angular kinematics, angular momentum and key release parameters (body angle, mass centre velocity and angular momentum about the mass centre and bar) were compared between skills. Expected differences in the release parameters of angle, angular momentum and velocity were observed and the specific mechanical requirement of each skill were highlighted. Whilst there were no differences in joint kinematics, hip and shoulder functional phase were significantly earlier in the circle for the Tkatchev. These findings highlight the importance of the orientation of the functional phase in the preceding giant swing and provide coaches with further understanding of the critical timing in this key phase

Coordination as a function of skill level in the gymnastics longswing

The purpose of this study was to investigate the nature of inter-joint coordination at different levels of skilled performance to: (1) distinguish learners who were successful versus unsuccessful in terms of their task performance; (2) investigate the pathways of change during the learning of a new coordination pattern and (3) examine how the learner’s coordination patterns relate to those of experts in the longswing gymnastics skill. Continuous relative phase of hip and shoulder joint motions was examined for longswings performed by two groups of novices, successful (n = 4) and unsuccessful (n = 4) over five practice sessions, and two expert gymnasts. Principal component analysis showed that during longswing positions where least continuous relative phase variability occurred for expert gymnasts, high variability distinguished the successful from the unsuccessful novice group. Continuous relative phase profiles of successful novices became more out-of-phase over practice and less similar to the closely in-phase coupling of the expert gymnasts. Collectively, the findings support the proposition that at the level in inter-joint coordination a technique emerges that facilitates successful performance but is not more like an expert’s movement coordination. This finding questions the appropriateness of inferring development towards a “gold champion” movement coordination

Biomechanical energetic analysis of technique during learning the longswing on high bar

Biomechanical energetic analysis of technique can be performed to identify limits or constraints to performance outcome at the level of joint work, and to assess the mechanical efficiency of techniques. The aim of this study was to investigate the biomechanical energetic processes during learning the longswing on the high bar. Twelve male, novice participants took part in a training study. Kinematic and kinetics data were collected during swing attempts in eight weekly testing sessions. Inverse dynamics analysis was performed from known zero forces at the toes. Joint work, total energy, and bar energy were calculated. Biomechanical constraints to action, that is, limits to novice performance, were identified as “total work” and “shoulder work”. The most biomechanically efficient technique was associated with an onset of the hip functional phase and joint work that occurred between 10–45° before the bottom of the swing. The learning of gross motor skills is realised through the establishment of a set of techniques with task specific biomechanical constraints. Knowledge of the biomechanical constraints to action associated with more effective and efficient techniques will be useful for both assessing learning and establishing effective learning interventions

MUSCULOSKELETAL WORK IN HIGH BAR PROGRESSIONS

This study explained and assessed the similarity in joint kinetic profiles between the longswing (LS) and four progressions. Video recordings of four male gymnasts performing the LS and four progressions were quantified using 2D DLT techniques on an instrumented high bar. Inverse dynamic analyses quantified the muscle moments and work done at hips and shoulders. RMSD analysis between the work during the LS and progressions was used to group the progressions based on overall level of similarity to the LS. The least similar progression was the looped bar pendulum swing, whilst the most similar was the bent knee LS. This study has identified that progressions can be classified into those that are similar in terms of physical demand or movement pattern. This study raises the question should progressions be selected based on its kinetic or kinematic similarity to the target skill

Soldier/Hardware-in-the-loop Simulation-based Combat Vehicle Duty Cycle Measurement: Duty Cycle Experiment 2

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1]. This paper is written in the context of [1] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Electric System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of 2,450 miles). The P&E SIL is, therefore, able to respond to commands issued by the vehicle’s driver and gunner and, in real-time, affect the simulated vehicle’s performance. By thus incorporating hardware into a human-in-the-loop experiment, TARDEC engineers are able to evaluate the actual power system as it responds to actual human behavior. After introducing the project, the paper describes the simulation environment which was assembled to run the experiment. It emphasizes the design of the experiment as well as the approach, challenges and issues involved in creating a real-time link between the motion-base simulator and the P&E SIL. It presents the test results and briefly discusses on-going and future work

Option selection in whole-body rotation movements in gymnastics

Abstract When a gymnast performs a somersault, the linear and angular momentum along with a particular control of inertia during the flight phase constrain the possibilities for action. Given the complexity and dynamic nature of the human moving system, one could argue that there exist a particular amount of stable coordination states when performing somersaults. The goal of this study was to explore the manifold of movement options and coordination states along with their differentiating parameters for a single somersault in gymnastics based on a simple mathematical model reflecting gymnast’s rotation behavior during the flight phase. Biomechanical parameters determining rotation behavior during a somersault were systematically varied with regard to a particular set of biomechanical constraints defining a successful somersault performance. Batch simulations revealed that from 10229760 simulation cycles only 655346 (approximately 6.41%) led to successful somersault performance. A subsequent analysis of the movement option landscape for the optimum angular momentum revealed ten coordination states for a single somersault that could be clearly distinguished based on the simulation parameters. Taken the results together, it becomes apparent that it may be most advisable to perform a single somersault with a larger moment of inertia when achieving the tucked position, a longer duration to achieve the tucked position, a longer duration of staying tucked, and an intermediate moment of inertia during landing. This strategy comprises the largest amount of movement options associated with an upright landing and thus the highest probability of success when performing a single somersault