Rapid Industrial Prototyping and SoC Design of 3G/4G Wireless Systems Using an HLS Methodology

Many very-high-complexity signal processing algorithms are required in future wireless systems, giving tremendous challenges to real-time implementations. In this paper, we present our industrial rapid prototyping experiences on 3G/4G wireless systems using advanced signal processing algorithms in MIMO-CDMA and MIMO-OFDM systems. Core system design issues are studied and advanced receiver algorithms suitable for implementation are proposed for synchronization, MIMO equalization, and detection. We then present VLSI-oriented complexity reduction schemes and demonstrate how to interact these high-complexity algorithms with an HLS-based methodology for extensive design space exploration. This is achieved by abstracting the main effort from hardware iterations to the algorithmic C/C++ fixed-point design. We also analyze the advantages and limitations of the methodology. Our industrial design experience demonstrates that it is possible to enable an extensive architectural analysis in a short-time frame using HLS methodology, which significantly shortens the time to market for wireless systems.National Science Foundatio

Implementation of a High Throughput Soft MIMO Detector on GPU

Multiple-input multiple-output (MIMO) significantly increases the throughput of a communication system by employing multiple antennas at the transmitter and the receiver. To extract maximum performance from a MIMO system, a computationally intensive search based detector is needed. To meet the challenge of MIMO detection, typical suboptimal MIMO detectors are ASIC or FPGA designs. We aim to show that a MIMO detector on Graphic processor unit (GPU), a low-cost parallel programmable co-processor, can achieve high throughput and can serve as an alternative to ASIC/FPGA designs. However, careful architecture aware software design is needed to leverage the performance offered by GPU. We propose a novel soft MIMO detection algorithm, multi-pass trellis traversal (MTT), and show that we can achieve ASIC/FPGA-like performance and handle different configurations in software on GPU. The proposed design can be used to accelerate wireless physical layer simulations and to offload MIMO detection processing in wireless testbed platforms.NokiaNokia Siemens Networks (NSN)Texas InstrumentsXilinxNational Science Foundatio

Probabilistically Bounded Soft Sphere Detection for MIMO-OFDM Receivers: Algorithm and System Architecture

Iterative soft detection and channel decoding for MIMO OFDM downlink receivers is studied in this work. Proposed inner soft sphere detection employs a variable upper bound for number of candidates per transmit antenna and utilizes the breath-first candidate-search algorithm. Upper bounds are based on probability distribution of the number of candidates found inside the spherical region formed around the received symbol-vector. Detection accuracy of unbounded breadth-first candidate search is preserved while significant reduction of the search latency and area cost is achieved. This probabilistically bounded candidate-search algorithm improves error-rate performance of non-probabilistically bounded soft sphere detection algorithms, while providing smaller detection latency with same hardware resources. Prototype architecture of soft sphere detector is synthesized on Xilinx FPGA and for an ASIC design. Using area-cost of a single soft sphere detector, a level of processing parallelism required to achieve targeted high data rates for future wireless systems (for example, 1 Gbps data rate) is determined.NokiaNational Science Foundatio

FlexCore: Massively Parallel and Flexible Processing for Large MIMO Access Points

Large MIMO base stations remain among wireless network designers’ best tools for increasing wireless throughput while serving many clients, but current system designs, sacrifice throughput with simple linear MIMO detection algorithms. Higher-performance detection techniques are known, but remain off the table because these systems parallelize their computation at the level of a whole OFDM subcarrier, sufficing only for the less demanding linear detection approaches they opt for. This paper presents FlexCore, the first computational architecture capable of parallelizing the detection of large numbers of mutually-interfering information streams at a granularity below individual OFDM subcarriers, in a nearly-embarrassingly parallel manner while utilizing any number of available processing elements. For 12 clients sending 64-QAM symbols to a 12-antenna base station, our WARP testbed evaluation shows similar network throughput to the state-of-the-art while using an order of magnitude fewer processing elements. For the same scenario, our combined WARP-GPU testbed evaluation demonstrates a 19x computational speedup, with 97% increased energy efficiency when compared with the state of the art. Finally, for the same scenario, an FPGA-based comparison between FlexCore and the state of the art shows that FlexCore can achieve up to 96% better energy efficiency, and can offer up to 32x the processing throughput

Hardware Accelerator for MIMO Wireless Systems

Ever increasing demand for higher data rates and better Quality of Service (QoS) for a growing number of users requires new transceiver algorithms and architectures to better exploit the available spectrum and to efficiently counter the impairments of the radio channel. Multiple-Input Multiple-Output (MIMO) communication systems employ multiple antennas at both transmitter and at the receiver to meet the requirements of next-generation wireless systems. It is a promising technology to provide increased data rates while not involving an equivalent increase in the spectral requirements. However, practical implementation of MIMO detectors poses a significant challenge and has been consistently identified as the major bottleneck for realizing the full potential that multiple antenna systems promise. Furthermore, in order to make judicious use of the available bandwidth, the baseband units have to dynamically adapt to different modes (modulation schemes, code rates etc) of operations. Flexibility and high throughput requirements often place conflicting demands on the Very Large Scale Integration (VLSI) system designer. The major focus of this dissertation is to present efficient VLSI architectures for configurable MIMO detectors that can serve as accelerators to enable the realization of next generation wireless devices feasible. Both, hard output and soft output detector architectures are considered

Cooperative Partial Detection for MIMO Relay Networks

This paper was submitted by the author prior to final official version. For official version please see http://hdl.handle.net/1911/64372Cooperative communication has recently re-emerged as a possible paradigm shift to realize the promises of the ever increasing wireless communication market; how- ever, there have been few, if any, studies to translate theoretical results into feasi- ble schemes with their particular practical challenges. The multiple-input multiple- output (MIMO) technique is another method that has been recently employed in different standards and protocols, often as an optional scenario, to further improve the reliability and data rate of different wireless communication applications. In this work, we look into possible methods and algorithms for combining these two tech- niques to take advantage of the benefits of both. In this thesis, we will consider methods that consider the limitations of practical solutions, which, to the best of our knowledge, are the first time to be considered in this context. We will present complexity reduction techniques for MIMO systems in cooperative systems. Furthermore, we will present architectures for flexible and configurable MIMO detectors. These architectures could support a range of data rates, modulation orders and numbers of antennas, and therefore, are crucial in the different nodes of cooperative systems. The breadth-first search employed in our realization presents a large opportunity to exploit the parallelism of the FPGA in order to achieve high data rates. Algorithmic modifications to address potential sequential bottlenecks in the traditional bread-first search-based SD are highlighted in the thesis. We will present a novel Cooperative Partial Detection (CPD) approach in MIMO relay channels, where instead of applying the conventional full detection in the relay, the relay performs a partial detection and forwards the detected parts of the message to the destination. We will demonstrate how this approach leads to controlling the complexity in the relay and helping it choose how much it is willing to cooperate based on its available resources. We will discuss the complexity implications of this method, and more importantly, present hardware verification and over-the-air experimentation of CPD using the Wireless Open-access Research Platform (WARP).NSF grants EIA-0321266, CCF-0541363, CNS-0551692, CNS-0619767, EECS-0925942, and CNS-0923479, Nokia, Xilinx, Nokia Siemens Networks, Texas Instruments, and Azimuth Systems

MIMOPack: A High Performance Computing Library for MIMO Communication Systems

[EN] Nowadays, several communication standards are emerging and evolving, searching higher transmission rates, reliability and coverage. This expansion is primarily driven by the continued increase in consumption of mobile multimedia services due to the emergence of new handheld devices such as smartphones and tablets. One of the most significant techniques employed to meet these demands is the use of multiple transmit and receive antennas, known as MIMO systems. The use of this technology allows to increase the transmission rate and the quality of the transmission through the use of multiple antennas at the transmitter and receiver sides. MIMO technologies have become an essential key in several wireless standards such as WLAN, WiMAX and LTE. These technologies will be incorporated also in future standards, therefore is expected in the coming years a great deal of research in this field. Clearly, the study of MIMO systems is critical in the current investigation, however the problems that arise from this technology are very complex. High Performance Computing (HPC) systems, and specifically, modern hardware architectures as multi-core and many-cores (e.g Graphics Processing Units (GPU)) are playing a key role in the development of efficient and low-complexity algorithms for MIMO transmissions. Proof of this is that the number of scientific contributions and research projects related to its use has increased in the last years. Also, some high performance libraries have been implemented as tools for researchers involved in the development of future communication standards. Two of the most popular libraries are: IT++ that is a library based on the use of some optimized libraries for multi-core processors and the Communications System Toolbox designed for use with MATLAB, which uses GPU computing. However, there is not a library able to run on a heterogeneous platform using all the available resources. In view of the high computational requirements in MIMO application research and the shortage of tools able to satisfy them, we have made a special effort to develop a library to ease the development of adaptable parallel applications in accordance with the different architectures of the executing platform. The library, called MIMOPack, aims to implement efficiently using parallel computing, a set of functions to perform some of the critical stages of MIMO communication systems simulation. The main contribution of the thesis is the implementation of efficient Hard and Soft output detectors, since the detection stage is considered the most complex part of the communication process. These detectors are highly configurable and many of them include preprocessing techniques that reduce the computational cost and increase the performance. The proposed library shows three important features: portability, efficiency and easy of use. Current realease allows GPUs and multi-core computation, or even simultaneously, since it is designed to use on heterogeneous machines. The interface of the functions are common to all environments in order to simplify the use of the library. Moreover, some of the functions are callable from MATLAB increasing the portability of developed codes between different computing environments. According to the library design and the performance assessment, we consider that MIMOPack may facilitate industrial and academic researchers the implementation of scientific codes without having to know different programming languages and machine architectures. This will allow to include more complex algorithms in their simulations and obtain their results faster. This is particularly important in the industry, since the manufacturers work to analyze and to propose their own technologies with the aim that it will be approved as a standard. Thus allowing to enforce their intellectual property rights over their competitors, who should obtain the corresponding licenses to include these technologies into their products.[ES] En la actualidad varios estándares de comunicación están surgiendo buscando velocidades de transmisión más altas y mayor fiabilidad. Esta expansión está impulsada por el aumento en el consumo de servicios multimedia debido a la aparición de nuevos dispositivos como los smartphones y las tabletas. Una de las técnicas empleadas más importantes es el uso de múltiples antenas de transmisión y recepción, conocida como sistemas MIMO, que permite aumentar la velocidad y la calidad de la transmisión. Las tecnologías MIMO se han convertido en una parte esencial en diferentes estándares tales como WLAN, WiMAX y LTE. Estas tecnologías se incorporarán también en futuros estándares, por lo tanto, se espera en los próximos años una gran cantidad de investigación en este campo. Está claro que el estudio de los sistemas MIMO es crítico en la investigación actual, sin embargo los problemas que surgen de esta tecnología son muy complejos. La sistemas de computación de alto rendimiento, y en concreto, las arquitecturas hardware actuales como multi-core y many-core (p. ej. GPUs) están jugando un papel clave en el desarrollo de algoritmos eficientes y de baja complejidad en las transmisiones MIMO. Prueba de ello es que el número de contribuciones científicas y proyectos de investigación relacionados con su uso se han incrementado en el últimos años. Algunas librerías de alto rendimiento se están utilizando como herramientas por investigadores en el desarrollo de futuros estándares. Dos de las librerías más destacadas son: IT++ que se basa en el uso de distintas librerías optimizadas para procesadores multi-core y el paquete Communications System Toolbox diseñada para su uso con MATLAB, que utiliza computación con GPU. Sin embargo, no hay una biblioteca capaz de ejecutarse en una plataforma heterogénea. En vista de los altos requisitos computacionales en la investigación MIMO y la escasez de herramientas capaces de satisfacerlos, hemos implementado una librería que facilita el desarrollo de aplicaciones paralelas adaptables de acuerdo con las diferentes arquitecturas de la plataforma de ejecución. La librería, llamada MIMOPack, implementa de manera eficiente un conjunto de funciones para llevar a cabo algunas de las etapas críticas en la simulación de un sistema de comunicación MIMO. La principal aportación de la tesis es la implementación de detectores eficientes de salida Hard y Soft, ya que la etapa de detección es considerada la parte más compleja en el proceso de comunicación. Estos detectores son altamente configurables y muchos de ellos incluyen técnicas de preprocesamiento que reducen el coste computacional y aumentan el rendimiento. La librería propuesta tiene tres características importantes: la portabilidad, la eficiencia y facilidad de uso. La versión actual permite computación en GPU y multi-core, incluso simultáneamente, ya que está diseñada para ser utilizada sobre plataformas heterogéneas que explotan toda la capacidad computacional. Para facilitar el uso de la biblioteca, las interfaces de las funciones son comunes para todas las arquitecturas. Algunas de las funciones se pueden llamar desde MATLAB aumentando la portabilidad de códigos desarrollados entre los diferentes entornos. De acuerdo con el diseño de la biblioteca y la evaluación del rendimiento, consideramos que MIMOPack puede facilitar la implementación de códigos sin tener que saber programar con diferentes lenguajes y arquitecturas. MIMOPack permitirá incluir algoritmos más complejos en las simulaciones y obtener los resultados más rápidamente. Esto es particularmente importante en la industria, ya que los fabricantes trabajan para proponer sus propias tecnologías lo antes posible con el objetivo de que sean aprobadas como un estándar. De este modo, los fabricantes pueden hacer valer sus derechos de propiedad intelectual frente a sus competidores, quienes luego deben obtener las correspon[CA] En l'actualitat diversos estàndards de comunicació estan sorgint i evolucionant cercant velocitats de transmissió més altes i major fiabilitat. Aquesta expansió, està impulsada pel continu augment en el consum de serveis multimèdia a causa de l'aparició de nous dispositius portàtils com els smartphones i les tablets. Una de les tècniques més importants és l'ús de múltiples antenes de transmissió i recepció (MIMO) que permet augmentar la velocitat de transmissió i la qualitat de transmissió. Les tecnologies MIMO s'han convertit en una part essencial en diferents estàndards inalàmbrics, tals com WLAN, WiMAX i LTE. Aquestes tecnologies s'incorporaran també en futurs estàndards, per tant, s'espera en els pròxims anys una gran quantitat d'investigació en aquest camp. L'estudi dels sistemes MIMO és crític en la recerca actual, no obstant açó, els problemes que sorgeixen d'aquesta tecnologia són molt complexos. Els sistemes de computació d'alt rendiment com els multi-core i many-core (p. ej. GPUs)), estan jugant un paper clau en el desenvolupament d'algoritmes eficients i de baixa complexitat en les transmissions MIMO. Prova d'açò és que el nombre de contribucions científiques i projectes d'investigació relacionats amb el seu ús s'han incrementat en els últims anys. Algunes llibreries d'alt rendiment estan utilitzant-se com a eines per investigadors involucrats en el desenvolupament de futurs estàndards. Dos de les llibreries més destacades són: IT++ que és una llibreria basada en lús de diferents llibreries optimitzades per a processadors multi-core i el paquet Communications System Toolbox dissenyat per al seu ús amb MATLAB, que utilitza computació amb GPU. No obstant açò, no hi ha una biblioteca capaç d'executar-se en una plataforma heterogènia. Degut als alts requisits computacionals en la investigació MIMO i l'escacès d'eines capaces de satisfer-los, hem implementat una llibreria que facilita el desenvolupament d'aplicacions paral·leles adaptables d'acord amb les diferentes arquitectures de la plataforma d'ejecució. La llibreria, anomenada MIMOPack, implementa de manera eficient, un conjunt de funcions per dur a terme algunes de les etapes crítiques en la simulació d'un sistema de comunicació MIMO. La principal aportació de la tesi és la implementació de detectors eficients d'exida Hard i Soft, ja que l'etapa de detecció és considerada la part més complexa en el procés de comunicació. Estos detectors són altament configurables i molts d'ells inclouen tècniques de preprocessament que redueixen el cost computacional i augmenten el rendiment. La llibreria proposta té tres característiques importants: la portabilitat, l'eficiència i la facilitat d'ús. La versió actual permet computació en GPU i multi-core, fins i tot simultàniament, ja que està dissenyada per a ser utilitzada sobre plataformes heterogènies que exploten tota la capacitat computacional. Amb el fi de simplificar l'ús de la biblioteca, les interfaces de les funcions són comunes per a totes les arquitectures. Algunes de les funcions poden ser utilitzades des de MATLAB augmentant la portabilitat de còdics desenvolupats entre els diferentes entorns. D'acord amb el disseny de la biblioteca i l'evaluació del rendiment, considerem que MIMOPack pot facilitar la implementació de còdics a investigadors sense haver de saber programar amb diferents llenguatges i arquitectures. MIMOPack permetrà incloure algoritmes més complexos en les seues simulacions i obtindre els seus resultats més ràpid. Açò és particularment important en la industria, ja que els fabricants treballen per a proposar les seues pròpies tecnologies el més prompte possible amb l'objectiu que siguen aprovades com un estàndard. D'aquesta menera, els fabricants podran fer valdre els seus drets de propietat intel·lectual enfront dels seus competidors, els qui després han d'obtenir les corresponents llicències si voleRamiro Sánchez, C. (2015). MIMOPack: A High Performance Computing Library for MIMO Communication Systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/53930TESISPremios Extraordinarios de tesis doctorale

Signal processing architectures for automotive high-resolution MIMO radar systems

To date, the digital signal processing for an automotive radar sensor has been handled in an efficient way by general purpose signal processors and microcontrollers. However, increasing resolution requirements for automated driving on the one hand, as well as rapidly growing numbers of manufactured sensors on the other hand, can provoke a paradigm change in the near future. The design and development of highly specialized hardware accelerators could become a viable option - at least for the most demanding processing steps with data rates of several gigabits per second. In this work, application-specific signal processing architectures for future high-resolution multiple-input and multiple-output (MIMO) radar sensors are designed, implemented, investigated and optimized. A focus is set on real-time performance such that even sophisticated algorithms can be computed sufficiently fast. The full processing chain from the received baseband signals to a list of detections is considered, comprising three major steps: Spectrum analysis, target detection and direction of arrival estimation. The developed architectures are further implemented on a field-programmable gate array (FPGA) and important measurements like resource consumption, power dissipation or data throughput are evaluated and compared with other examples from literature. A substantial dataset, based on more than 3600 different parametrizations and variants, has been established with the help of a model-based design space exploration and is provided as part of this work. Finally, an experimental radar sensor has been built and is used under real-world conditions to verify the effectiveness of the proposed signal processing architectures.Bisher wurde die digitale Signalverarbeitung für automobile Radarsensoren auf eine effiziente Art und Weise von universell verwendbaren Mikroprozessoren bewältigt. Jedoch können steigende Anforderungen an das Auflösungsvermögen für hochautomatisiertes Fahren einerseits, sowie schnell wachsende Stückzahlen produzierter Sensoren andererseits, einen Paradigmenwechsel in naher Zukunft bewirken. Die Entwicklung von hochgradig spezialisierten Hardwarebeschleunigern könnte sich als eine praktikable Alternative etablieren - zumindest für die anspruchsvollsten Rechenschritte mit Datenraten von mehreren Gigabits pro Sekunde. In dieser Arbeit werden anwendungsspezifische Signalverarbeitungsarchitekturen für zukünftige, hochauflösende, MIMO Radarsensoren entworfen, realisiert, untersucht und optimiert. Der Fokus liegt dabei stets auf der Echtzeitfähigkeit, sodass selbst anspruchsvolle Algorithmen in einer ausreichend kurzen Zeit berechnet werden können. Die komplette Signalverarbeitungskette, beginnend von den empfangenen Signalen im Basisband bis hin zu einer Liste von Detektion, wird in dieser Arbeit behandelt. Die Kette gliedert sich im Wesentlichen in drei größere Teilschritte: Spektralanalyse, Zieldetektion und Winkelschätzung. Des Weiteren werden die entwickelten Architekturen auf einem FPGA implementiert und wichtige Kennzahlen wie Ressourcenverbrauch, Stromverbrauch oder Datendurchsatz ausgewertet und mit anderen Beispielen aus der Literatur verglichen. Ein umfangreicher Datensatz, welcher mehr als 3600 verschiedene Parametrisierungen und Varianten beinhaltet, wurde mit Hilfe einer modellbasierten Entwurfsraumexploration erstellt und ist in dieser Arbeit enthalten. Schließlich wurde ein experimenteller Radarsensor aufgebaut und dazu benutzt, die entworfenen Signalverarbeitungsarchitekturen unter realen Umgebungsbedingungen zu verifizieren

On the application of graphics processor to wireless receiver design

In many wireless systems, a Turbo decoder is often combined with a soft-output multiple-input and multiple-output (MIMO) detector at the receiver to maximize performance in many 4G and beyond wireless standards. Although custom application specific designs are usually used to meet this challenge, programmable graphics processing units (GPU) has become an alternative to the traditional ASIC and FPGA solution for wireless applications. However, careful architecture-aware algorithm design and mapping are required to maximize performance of a communication block on GPU. For MIMO soft detection, we implemented a new MIMO soft detection algorithm, multi-pass trellis traversal (MTT). For Turbo decoding, we used a parallel window algorithm. We showed that our implementations can achieve high throughput while maintaining good performance. This work will allow us to implement a complete iterative MIMO receiver in software on GPU in the future