Novel optical transmitters for high speed optical networks

The objective of this thesis is to investigate the performance of novel optical transmitter lasers for use in high speed optical networks. The laser technology considered is the discrete mode laser diode (DMLD) which is designed to achieve single wavelength operation by etching features on the surface of the ridge waveguide. This leads to a simplified manufacturing process by eliminating the regrowth step used in conventional approaches, presenting an economic approach to high volume manufacture of semiconductor lasers. Two application areas are investigated in this work. The bit rate in next generation access networks is moving to 10 Gbit/s. This work characterises the performance of DMLDs designed for high speed operation with the objective of identifying the limitations and improving performance to meet the specifications for uncooled operation at 10 Gbit/s. With the deployment of advanced modulation formats the phase noise of the laser source has become an important parameter, particularly for higher order formats. DMLDs were developed for narrow linewidth operation. The linewidth of these devices was characterised and a value as low as 70 kHz was demonstrated. Transmission experiments were also carried out using a coherent transmission test bed and the performance achieve is compared with that of an external cavity laser

An Optoelectronic Stimulator for Retinal Prosthesis

Retinal prostheses require the presence of viable population of cells in the inner retina. Evaluations of retina with Age-Related Macular Degeneration (AMD) and Retinitis Pigmentosa (RP) have shown a large number of cells remain in the inner retina compared with the outer retina. Therefore, vision loss caused by AMD and RP is potentially treatable with retinal prostheses. Photostimulation based retinal prostheses have shown many advantages compared with retinal implants. In contrary to electrode based stimulation, light does not require mechanical contact. Therefore, the system can be completely external and not does have the power and degradation problems of implanted devices. In addition, the stimulating point is flexible and does not require a prior decision on the stimulation location. Furthermore, a beam of light can be projected on tissue with both temporal and spatial precision. This thesis aims at fi nding a feasible solution to such a system. Firstly, a prototype of an optoelectronic stimulator was proposed and implemented by using the Xilinx Virtex-4 FPGA evaluation board. The platform was used to demonstrate the possibility of photostimulation of the photosensitized neurons. Meanwhile, with the aim of developing a portable retinal prosthesis, a system on chip (SoC) architecture was proposed and a wide tuning range sinusoidal voltage-controlled oscillator (VCO) which is the pivotal component of the system was designed. The VCO is based on a new designed Complementary Metal Oxide Semiconductor (CMOS) Operational Transconductance Ampli er (OTA) which achieves a good linearity over a wide tuning range. Both the OTA and the VCO were fabricated in the AMS 0.35 µm CMOS process. Finally a 9X9 CMOS image sensor with spiking pixels was designed. Each pixel acts as an independent oscillator whose frequency is controlled by the incident light intensity. The sensor was fabricated in the AMS 0.35 µm CMOS Opto Process. Experimental validation and measured results are provided

Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizació

Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizaciónPostprint (published version

Estudio y diseño de dos placas de intercambio de datos de inclinación y posición entre dos cubesats

El grupo de investigación DISEN con sede en el Campus de Terrassa de la UPC está intentando impulsar el proyecto de la implementación de una infraestructura de comunicaciones basada en el enlace óptico de CubeSats. Mediante este tipo de comunicación, se podría obtener un mayor data-rate y un menor consumo de potencia que en los actuales sistemas de radiofrecuencia. Para poder realizar este enlace óptico, es necesario que el rayo láser proveniente de uno de los satélites se centre de forma muy precisa en el foto-detector del otro satélite. Para realizar dicho centrado, ambos satélites deberán conocer a priori la posición e inclinación de ambos, información que deberán intercambiarse mediante radiofrecuencia. El presente TFG versa sobre el diseño del subsistema de intercambio de datos de posición e inclinación entre dos CubeSats. Concretamente, el diseño de dos placas PCB formadas por un módulo GPS, para obtener la posición de los CubeSats; un módulo IMU, para obtener sus actitudes; un módulo de radio UHF, para enviar datos entre los dos CubeSats por radiofrecuencia; y un módulo Bluetooth para poder enlazar el sistema con el ordenador de base. Además, las placas cuentan con un microcontrolador para procesar y almacenar la información de dichos módulos

Integration of wirelessHART and STK600 development kit for data collection in wireless sensor networks

Offshore industry operates in world’s most challenging environment. Oil and gas facilities aim for continuous production to achieve the desired goals and a robust communication network is required to avoid production loses. The IEEE 802.15.4 specification has enabled low cost, low power Wireless Sensor Networks (WSNs) capable of providing robust communication and therefore utilises as a promising technology in oil and gas industry. The two most prominent industrial standards using the IEEE 802.15.4 radio technology are WirelessHART and ISA100.11a.These are currently the competitors in the automation and offshore industry. In this project, we have worked on Nivis WirelessHART development kit that has some on-board sensors. Our main goal is to integrate WirelessHART with external sensor board so that we can get the readings from external sensors and publish the data over web interface provided by Nivis. Since, Nivis WirelessHART field router is not an open source and un-programmable, therefore it is considered as a black box. Due to lack of such capabilities, we cannot connect external sensor directly to Nivis radio. We have chosen Atmel STK600-Atmega2560 development kit as an external sensor board. In order to establish communication between STK600 and Nivis WirelessHART, we have written an application in AVR studio and flash it to STK600 over the USB connection. We have implemented a serial communication protocol called Nivis simple API and made Nivis board able to get data from sensors interfacing STK600. Nivis radio will then forward this data to WirelessHART through HART gateway. Moreover, we have configured Monitoring Host to visualize the data from external sensors along with built-in sensors over the Monitoring Control System (MCS). Finally, we evaluate our implementation by various experiments and prove that the overall flow is working properly

Investigation of methods for data communication and power delivery through metals

PhD ThesisThe retrieval of data from a sensor, enclosed by a metallic structure, such as a naval vessel, pipeline or nuclear flask is often very challenging. To maintain structural integrity it is not desirable to penetrate the wall of the structure, preventing any hard-wired solution. Furthermore, the conductive nature of the structure prevents the use of radio communications. Applications involving sealed containers also have a requirement for power delivery, as the periodic changing of batteries is not possible. Ultrasound has previously been identified as an attractive approach but there are two key challenges: efficient/reliable ultrasonic transduction and a method of overcoming the inherent multipath distortion resulting from boundary reflections. Previous studies have utilised piezoelectric contact transducers, however, they are impractical due to their reliance on coupling, i.e. the bond between the transducer and the metal surface, which leads to concerns over long term reliability. A non-contact transducer overcomes this key drawback, thus highlighting the electromagnetic acoustic transducer (EMAT) as a favourable alternative. This thesis presents the design and testing of an EMAT with appropriate characteristics for through-metal data communications. A low cost, low power data transmission scheme is presented for overcoming acoustic multipath based on pulse position modulation (PPM). Due to the necessary guard time, the data rate is limited to 50kbps. A second solution is presented employing continuous wave, Quadrature phase shift keying (QPSK) modulation, allowing data rates in excess of 1Mbps to be achieved. Equalisation is required to avoid intersymbol interference (ISI) and a decision feedback equaliser (DFE) is shown to be adept at mitigating this effect. The relatively low efficiency of an EMAT makes it unsuitable for power delivery, consequently, an alternative non-contact approach, utilising inductive coupling, is explored. Power transfer efficiency of ≈ 4% is shown to be achievable through 20mm thick stainless steel.ICS department of BAE Systems Submarine Solutions, EPSR

Research and Technology Report. Goddard Space Flight Center

This issue of Goddard Space Flight Center's annual report highlights the importance of mission operations and data systems covering mission planning and operations; TDRSS, positioning systems, and orbit determination; ground system and networks, hardware and software; data processing and analysis; and World Wide Web use. The report also includes flight projects, space sciences, Earth system science, and engineering and materials

Research & Technology Report Goddard Space Flight Center

The main theme of this edition of the annual Research and Technology Report is Mission Operations and Data Systems. Shifting from centralized to distributed mission operations, and from human interactive operations to highly automated operations is reported. The following aspects are addressed: Mission planning and operations; TDRSS, Positioning Systems, and orbit determination; hardware and software associated with Ground System and Networks; data processing and analysis; and World Wide Web. Flight projects are described along with the achievements in space sciences and earth sciences. Spacecraft subsystems, cryogenic developments, and new tools and capabilities are also discussed