Design considerations of MIMO antennas for mobile phones

YesThe paper presents a new modeling and design concept of antennas using polar- ization diversity of 2 £ 2 and 3 £ 3 Multiple Input Multiple Outputs (MIMO) system that is proposed for future mobile handsets. The channel capacity is investigated and discussed over Raleigh fading channel and compared to a linear/planner antenna array MIMO channel. The capacity is also discussed over three types of power azimuth spectrums. The results are compared to the constraints capacity limits in which the maximum capacity observed

Channel Capacity Enhancement by Pattern Controlled Handset Antenna

This paper presents a radiation pattern controlled antenna for handset terminals to reduce the correlation coefficient between antennas and enhance the channel capacity in MIMO applications. A pair of small inverted-F shaped antennas combined by a phase shifter provides a single port with controlled pattern. To enhance the channel capacity, the phase difference for the IFA array is optimized using the evaluation parameter of reception level, correlation coefficient and mean effective gain of the proposed array geometry. The channel capacity enhancement is verified by assuming Croneker scattering under Nakagami-Rice propagation model

Design of 2x2 U-shape MIMO slot antennas with EBG material for mobile handset applications.

yesA compact dual U-shaped slot PIFA antenna with Electromagnetic Bandgap (EBG) material on a relatively low dielectric constant substrate is presented. Periodic structures have found to reduce mutual coupling and decrease the separation of antenna and ground plane. A design with EGB material suitable for a small terminal mobile handset operating at 2.4 GHz was studied. Simulated and measured scattering parameters are compared for U-shaped slot PIFA antenna with and without EBG structures. An evaluation of MIMO antennas is presented, with analysis of the mutual coupling, correlation coefficient, total active reflection coefficient (TARC), channel capacity and capacity loss. The proposed antenna meets the requirements for practical application within a mobile handset.Electronics and Telecommunication

A Reconfigurable MIMO Antenna System for Wireless Communications

A reconfigurable antenna system is proposed to improve data throughput limitations in multiple input multiple output wireless communication systems in this investigation. The4×4 MIMO antenna is designed to operate in the 2.4 and 2.6 GHz for  Wireless  Local  Area  Network  (WLAN)  and  Long  TermEvolution (LTE) applications. The system’s radiation pattern re-configurability is  realized by  using the  microcontroller-drivenPIN diode switching concept. Simulations and measurements exhibited good agreements for the single, 2×2 MIMO and 4×4MIMO configurations. The antenna is operational between 2.387to 2.628 GHz, while the simulated and measured reflection coefficients are at least -24.3 dB. All configurations produced anarrow beam forward radiation, while the envelope correlation coefficient (ECC) and diversity gain for the two MIMO configurations are below 0.5 and at least 9 dBi, respectively

Evaluation of performance of mobile terminal antennas

Fast development of new mobile communications equipment results in demand for fast and reliable evaluation methods to estimate the performance of mobile terminals because the performance of antennas located on the terminals varies in different multipath propagation environments. Two methods presented in this thesis provide new possibilities in antenna design because, from now on, the performance of new antennas can be tested already before a prototype antenna is constructed by using existing radio channel libraries and simulated radiation patterns of the antennas. The performance can be estimated by calculating the mean effective gain (MEG) of the antenna using the elevation power distribution or by a plane wave -based method using sets of incident plane waves and the radiation pattern of an antenna. In addition to different propagation environments, the effects of the user on performance can be included in the evaluation. In this thesis, estimating the MEG of different antennas using the elevation power distribution and the power patterns of the antennas is shown to be an accurate and fast method by comparing the results with direct radio channel measurements. The mean difference between the methods is −0.18 dB with standard deviation of 0.19 dB. The usefulness of the evaluation method is demonstrated by evaluating the performance of several antennas located on mobile terminals. The antenna evaluation provided important and unique knowledge of the effect of both the environment and the user on performance. Because in calculating the radiation efficiency of the antenna we assume uniform incident field, the efficiency can result in a performance estimation that does not correspond to real usage situations. Therefore, including the environmental effects in the evaluation procedure is important, although the effect of the antenna is more important than the effect of the environment on MEG. It was noticed with calculated Gaussian-shaped beams that tilting or changing the beamwidth of a mobile terminal antenna has an effect of about 2 dB on MEG in multipath environments. Matching the polarization of the antenna to that of the environment can improve the performance more. A novel incident plane wave -based tool has been developed for evaluating the performance of antenna configurations designed for diversity and Multiple-Input Multiple-Output (MIMO) systems. In this thesis, the instantaneous joint contribution of incident field consisting of a number of extracted plane waves and the complex three-dimensional radiation pattern of the antenna is shown to be accurate and extremely fast way to estimate the diversity advantages of different antenna configurations in time-variable radio channels. The difference between the diversity gains achieved by the plane wave -based method and by the direct radio channel measurements is on average less than 0.9 dB. Moreover, the radio channel can be exactly the same for all antenna configurations under test. Furthermore, this thesis includes evaluation of the performance of different MIMO antenna configurations. The studied antenna configurations have been selected from the 16×64 MIMO channel measurement data. A novel way of using one omnidirectional reference antenna in a normalization procedure is shown to be reasonable especially in cases of antenna arrays consisting of directive elements. Three different propagation environments are used as evaluation platforms. The azimuth orientation of mobile terminal antennas may influence the performance of a MIMO antenna configuration significantly. In MIMO configurations compact dual-polarized receiving antennas provide capacity performance almost equal to the arrays employing single polarization.reviewe